• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.5
• /
• pp.405-412
• /
• 1999

Meta! Halide Discharge(]\1HD) Iamps have good color rendition, long life and good focusing capability but h have flickers bv acoustic resonances. We have designed the electronic ballast for reducing acoustic resonances in high pressure discharge tube. The ballast consists of main two parts, the first part is a half-bridge inverter to make a square wave form a and the st'Cond part is a flyback converter to combine the low frequency and high frequency component. As a r result of this study, we conclude that MHD lamps of 70 watt 따c very well light(D without acoustic resonance p phenomena by the elestronic ballast.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.208-213
• /
• 2010

This paper describes the instruments used, and the test procedures adopted, and the findings obtained from a research project aiming to investigate, via full-scale field tests, the ground borne vibration caused by underground railway tunnel constructed in hard rock. The ground borne vibration induced by high-speed trains (i.e. the Korea Train eXpress (KTX) services) with a speed of approximately 200km/hr was measured inside the borehole constructed in the close proximity to the KTX tunnel using 3-component borehole seismographs in order to investigate the wave propagation of ground borne vibration. This paper also discusses the limitation associated with the current practice of measuring ground borne vibration using conventional borehole seismograph.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.3
• /
• pp.116-121
• /
• 2005

In the present paper, a new calculation algorithm far solving large scale environmental or geophysical flows with free surface is proposed where the non-hydrostatic pressure component is taken into consideration. Predictor-corrector fractional step approach with explicit, forward time marching scheme in the sigma coordinate system is employed. In order to validate the present calculation algorithm and to estimate the effects of non-hydrostatic pressure on resultant flow and free surface movements, example calculations are carried out for typical steady and unsteady flow problems. Present method can be applied to the meso-scale free surface flows with complex bottom topography where MAC-like 3-d hydrodynamic calculations are quite ineffective and uneconomic.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1996.04a
• /
• pp.77-92
• /
• 1996

When an automatic course-keeping is concerned as is quite popular in modern navigation the closed-loop steering system consists of autopilot device power unit (or telemotor unit) steering gear magnetic or gyro compass and ship dynamics. The consideration of irregular disturbances to ship dyanmics and a few non-linear mechanisms involved in the system inevitably or artificially are known to be very important in properly evaluating or analyzing the automatic steering system. In the present study the mathematical model of each element of an automatic steering system is derived which takes account of a fex non-linear mechanisms. PD(Proportional-Derivative) controller and low-pass filter with a weather adjustment are adopted to modelling the characteristics of an autopilot. The calculation method of imposing irregular disturbances to ship dynamics is proposed where irregular disturbances implying irregular wave and the fluctuating component of wind. For he evaluation of automatic steering system of ships in the open seas an important term "performance index" is introduced from the viewpoint of energy saving which derived from the concept of energy loss on ship propulsion. Finally the present methods are applied to two typical types of ship ; an ore carrier and a fishing boat. The various effects of linear and/or non-linear control constants of autopilot on propulsive energy loss are investigated to validate and clarify the present smulation technique.

• Journal of Environmental Health Sciences
• /
• v.13 no.2
• /
• pp.51-63
• /
• 1987

We identified pyrolysis condition, effect of catalyzer and pyrolysis mechanism through contact decomposed method by adding Bentonite in waste plastic of hospital solid waste. The result from this study were summarized as the followings: 1. The optimum fuel oil were obtained when hospital wasted plastic (P.P) and Bentonite were mixed in the ratio of 30:1. 2. Maximum absorption wave of hospital wasted plastic (P.P) appeared at 2900cm$^{-1}$, 1480cm$^{-1}$, 1360cm$^{-1}$ and 1180 cm$^{-1}$ by FT-IR and the plastics were identified and confirmed. 3. Reaction temperature of hospital wasted plastic started at 360$\circ$C, proceed rapidly at 437.5$\circ$C and finished at 481$\circ$C. The residue was 0.729%. When bentonire was added started at 318$\circ$C, proceed rapidly at 399.5$\circ$C and finished at 449.3$\circ$C, the residue being 4.23%. 4. Pyrolysis products of hospital wasted plastic were about 90 kinds. The Main components were 2-Heptene-3-ethyl-4-trimethyl (27.4%), 1-Heptene-2-isobutyl-6-methyl (8.6%) and 1-Heptene decene (7.7%). There was little component difference at different temperature. This is the result from stability of decomposition product. 5. Pyrolysis efficiency increased by the addition Bentonire. 6. Some of the Environmental and Sanitary problems could be solved by the pyrolysis of hospital wasted plastic and the decomposed products were to be used as fuel oil.

• Journal of The Korean Astronomical Society
• /
• v.44 no.3
• /
• pp.97-108
• /
• 2011

The photometric light curves of the W-type W UMa eclipsing contact binary system BB Pegasi have been found to be extremely asymmetric over all the observed 63 years in all wavelengths UBVR. The light curves have been characterized by occultation primary minima. Hence, the morphology of these light curves has been studied in view of these different asymmetric degrees. The system shows a distinct O'Connell effect, as well as depth variation. A 22.96 years of stellar dark spots cycle has been determined for the system. Almost the same cycle (22.78 yr) has been found for the depth variation of MinI and MinII. We also present an analysis of mid-eclipse time measurements of BB Peg. The analysis indicates a period decrement of $5.62{\times}10^{-8}$ day/yr, which can be interpreted in terms of mass transfer at a rate of $-4.38{\times}10^{-8}M_{\odot}$/yr, from the more to the less massive component. The O - C diagram shows a damping sine wave covering two different cycles of 17.0 yr and 12.87 yr with amplitudes equal to 0.0071 and 0.0013 day, respectively. These unequal durations show a non-periodicity which may be explained as a result of magnetic activity cycling variations due to star spots. The obtained characteristics are consistent with similar chromospherically active stars, when applying the Applegate's (1992) mechanism.

• Journal of Mechanical Science and Technology
• /
• v.17 no.7
• /
• pp.1095-1103
• /
• 2003

The Holographic Particle Velocimetry system can be a promising optical tool for the measurements of three dimensional particle velocities. In this study, the holographic particle velocimetry system was used to measure the sizes and velocities of droplets produced by a commercial full cone spray nozzle. As a preliminary validation experiment, the velocities of glass beads on a rotating disk were measured with uncertainty analysis to identify the sources of all relevant errors and to evaluate their magnitude. The error of the particle velocity measured by the holographic method was 0.75 ㎧, which was 4.5% of the known velocity estimated by the rotating speed of disk. The spray droplet velocities ranged from 10.3 to 13.3 ㎧ with average uncertainty of ${\pm}$ 1.6 ㎧, which was ${\pm}$ 14% of the mean droplet velocity. Compared with relatively small uncertainty of velocity components in the normal direction to the optical axis, uncertainty of the optical axis component was very high. This is due to the long depth of field of droplet images in the optical axis, which is inherent feature of holographic system using forward-scattering object wave of particles.

• Earthquakes and Structures
• /
• v.3 no.6
• /
• pp.839-852
• /
• 2012

Earthquake records are often analyzed in various earthquake engineering problems, making time-frequency analysis for such records of primary concern. The best tool for such analysis appears to be based on wavelet functions; selection of which is not an easy task and is commonly carried through trial and error process. Furthermore, often a particular wavelet is adopted for analysis of various earthquakes irrespective of record's prime characteristics, e.g. wave's magnitude. A wavelet constructed based on records' characteristics may yield a more accurate solution and more efficient solution procedure in time-frequency analysis. In this study, a low-pass reconstruction filter is obtained for each earthquake record based on multi-resolution decomposition technique; the filter is then assigned to be the normalized version of the last approximation component with respect to its magnitude. The scaling and wavelet functions are computed using two-scale relations. The calculated wavelets are highly efficient in decomposing the original records as compared to other commonly used wavelets such as Daubechies2 wavelet. The method is further advantageous since it enables one to decompose the original record in such a way that a clear time-frequency resolution is obtained.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.83-90
• /
• 2001

Conventional SAW duplexer filters employ a 1/4 wavelength transmission line, which causes difficulty in fabrication of the strip line on the package. Its manufacturing process is also complicated, because it needs integrating process of the separate transmitting filter, receiving filter and isolation circuits. This paper concerns development of a new structure of the duplexer filter that has all the transmitting filter, the receiving filter and the isolation circuit as a one chip device. For composition of the duplexer, we design the component SAW ladder filters and the isolation network consisting of lumped inductor and capacitor elements. Performance of the whole duplexer is optimized by the nonlinear multivariable minimization of a proper target function, and the result is compared with that of commercial filters.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.3
• /
• pp.12-18
• /
• 1970

In this paper, the radiation characteristics of a Circular Loop Antenna is studied in a moving homogeneous, isotropic and linear media with a constant velocity much less than the speed of light. In Stuffing the radiation characteristics, Srst vector potential on the loop antenna is derived in the moving media by appling Maxwell-Minkowaski's theory. Next, using the derived relations, the electric and magnetic Seld is calculated for the spec-i Sed wave length ana velocity of the media. The Seld patterns in the moving media are compared with those of stationary media. We find that the intensity of the field is reduced in the direction of the media velocity and increased in the opposite direction only for the component parallel with the plane of the antenna. The deviation from the stationary media is proportional to the velocity of the media and the frequency of source current.