• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.707-716
• /
• 2008

The objective of this study was to analyze the effect of mixed fuel composition and mass fraction on spray inner structure in evaporating transient spray under the variant ambient conditions. Spray structure and spatial distribution of liquid phase concentration were investigated using a thin laser sheet illumination technique on the three component mixed fuels. A pulsed Nd:YAG laser was used as a light source. The experiments were conducted in a constant volume vessel with optical access. Fuel was injected into the vessel with electronically controlled common rail injector. Used fuel contains i-octane($C_8H_{18}$), n-dodecane($C_{12}H_{26}$) and n-hexadecane($C_{16}H_{34}$) that were selected as low-, middle- and high-boiling point fuel, respectively. Experimental conditions are 42 MPa, 72 MPa and 112 MPa in injection pressure, $5\;kg/m^3$, $15kg/m^3$ and $30kg/m^3$ in ambient gas density, 300 K, 500 K, 600 K and 700 K in ambient gas temperature, 300 K and 368 K in fuel temperature and different fuel mass fraction. Experimental results indicated that the multi-component fuels made two phase region mixed vapor and liquid so that it would are helpful to improve combustion, for the fuels of high boiling point component could accelerate evaporation very much according as low boiling point fuel was added to high boiling point fuel.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.211-217
• /
• 2016

Boride coating applied on steam turbine parts of power plants has provided good particle erosion resistance under temperature of $550^{\circ}C$, but it isn't able to protect the parts effectively any more in ultra super critical (USC) steam turbine which is being operated up to temperature of $650^{\circ}C$. To ensure stable durability for USC steam turbine parts, an alternative coating replacing boride coating should be developed. In this study, multi-component boride coatings containing elements such as chromium (Cr) and vanadium (V) were formed on base metal (B50A365B) using thermochemical treatment method called by pack cementation. The thermochemical treatments involve consecutive diffusion of boron(B) and Cr or/and V using pack powders containing diffusion element sources, activators and diluents. The top layer of Cr-boride coating is primarily consisted of $Cr_2B_3$ and $Cr_5B_3$, while that of V-boride coating is mostly consisted of $VB_2$ and $V_2B_3$. The (Cr,V)-boride coating is consisted of $Cr_2B_3$, $Cr_5B_3$ and $V_2B_3$ mostly. The top surfaces of 3 multi-component boride coatings show hardness of $3200-3400H_v$, which is much higher than that of boride, about $1600-2000H_v$. In 5 wt.% NaCl solution immersion tests, the multi-component boride coatings show much better corrosion resistance than boride coating.

• 대기
• /
• 제31권1호
• /
• pp.29-43
• /
• 2021

In this study, two-step statistical approach including Principal Component Analysis (PCA) and Multiple Linear Regression (MLR) was employed, and main meteorological factors explaining the high-PM2.5 episodes were identified in two regions: Seoul and Busan. We first performed PCA to isolate the Principal Component (PC) that is linear combination of the meteorological variables observed at two levels: surface and 850 hPa level. The employed variables at surface are: temperature (T2m), wind speed, sea level pressure, south-north and west-east wind component and those at 850 hPa upper level variables are: south-north (v850) and west-east (u850) wind component and vertical stability. Secondly we carried out MLR analysis and verified the relationships between PM2.5 daily mean concentration and meteorological PCs. Our two-step statistical approach revealed that in Seoul, dominant factors for influencing the high PM2.5 days are mainly composed of upper wind characteristics in winter including positive u850 and negative v850, indicating that continental (or Siberian) anticyclone had a strong influence. In Busan, however, the dominant factors in explanaining in high PM2.5 concentrations were associated with high T2m and negative u850 in summer. This is suggesting that marine anticyclone had a considerable effect on Busan's high PM2.5 with high temperature which is relevant to the vigorous photochemical secondary generation. Our results of both differences and similarities between two regions derived from only statistical approaches imply the high-PM2.5 episodes in Korea show their own unique characteristics and seasonality which are mostly explainable by two layer (surface and upper) mesoscale meteorological variables.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권2호
• /
• pp.67-74
• /
• 2008

본 연구에서는 탄소섬유접착보강공법의 박리와 연관한 부착특성에 대하여 검토하였다. 그 결과를 요약하면, 온도변화에 따른 변형 특성에서는 바탕 콘크리트의 강도에 관계없이 온도 변화에 따라서 각 재료들의 변형 폭도 커지는 것을 알 수 있었다. 초음파 전파 속도도 온도변화에 따라 작아지는 것으로 나타나 계면에서 박리가 발생하였음을 알 수 있었다. 부착강도는 온도 변화가 클수록 부착강도의 값은 작아지는 것으로 나타났는데, 파괴형태는 계면파괴와 모재파괴 형태로 나타났다. 건습 변화에 따라서는 4사이클까지 각 재료의 변형 및 초음파 전파 속도에서 큰 변화를 나타내지 않아 건습 자체의 반복에는 큰 영향이 없는 것으로 판단된다. 단, 부착강도는 40%정도 저하하는 것으로 나타났지만 비교적 양호한 강도를 나타내었다. 동결융해 시험결과는 온도변화 요인과 유사한 경향으로서 동결융해 작용을 받을 경우 4사이클 이내에 박리가 일어날 수 있는 것으로 분석되었다.

• 한국작물학회지
• /
• 제62권2호
• /
• pp.149-155
• /
• 2017

본 연구는 야콘의 안정적 생산을 위한 재배지대 설정을 위해 2011년부터 2013년까지 4년간 8개 지역을 대상으로 생산성과 기능성 성분 함량을 조사하였고, 기상 등 재배환경과의 관련성을 검토하였다. 이들 데이터를 활용하여 주성분 분석을 수행한 결과는 다음과 같다. 1. 야콘 8재배지역에서 16개의 농업적 형질과 기상데이터을 조사한 결과 재배지대를 구분할 수 있는 기준은 p < 0.001 수준에서 평균온도, 최고온도, 최저온도, 무상일수 및 프락토올리고당으로 나타났으며, p < 0.01 수준에서 총수량, 상품수량, 글루코스 및 환원당으로 나타났다. 2. 야콘 재배지대별 주성분 분석에 이용된 16개의 농업적 형질 및 기상자료 중 제 1주성분은 약 8개, 제 2 및 3주성분은 각각 약 4개의 형질을 대표하고 있는 것으로 나타났으며, 특히, 야콘 재배지대를 분류하는데 있어서 생산성, 프락토올리고당, 기후변화와 관련된 요인이 중요한 기준이 되는 것으로 판단되었다. 3. 야콘 재배지대별 주성분 분석한 결과, 3개의 그룹으로 구분되었다. Group I에서는 상품수량이 2,622~3,196 kg/10a로 가장 많았고, 프락토올리고당 함량이 9.04~9.62%로 높았고, 평균온도가 $17.3{\sim}18.5^{\circ}C$로 서늘한 기후 조건을 나타내는 해발 500~560 m의 준고랭지 지역인 진부, 봉화 지역이었다. Group II에서는 상품수량이 가장 적었고, 프락토올리고당 함량이 비교적 적고, 최고온도가 가장 높은 해발 20~180 m의 평난지인 순천, 옥천, 여주, 강릉 지역이었다. Group III에서는 Group I과 Group II의 중간 값을 나타내었다. 4. 야콘 재배지역에 따라 기온환경에 따라 상품수량 및 프락토올리고당 함량이 차이를 나타내어 재배적지를 판단하는데 온도조건과 무상일수가 중요한 지표로 판단되므로 품질이 우수한 야콘을 생산하기 위해서는 준고랭지인 해발 500~560 m에서 재배하는 것이 수량과 기능성 물질인 프락토올리고당 함량이 높을 것으로 판단된다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2007년도 제34회 시멘트 심포지엄
• /
• pp.129-137
• /
• 2007

This paper presents a numerical model which can predict degree of hydration of cement mineral component, such as $C_{3}S$, $C_{2}S$, $C_{3}A$, $C_{4}AF$ and microstructure of hydrating cement as a function of water to cement ratio, cement particle size distribution, cement mineral components and temperature. In this model cement particles are parked randomly in cell space and hydration process is described using a multi-component integrated kinetic model. The simulation result of degree of hydration of cement mineral component agrees well with experiment result. The content of cement hydration product, such as CSH and CH can be obtained as an accompanied result during hydration process. By introducing of equal-area projection method, water withdrawl mechanism and contact area among cement particles can be considered in detail. By using proposed method, pore size distribution of hydrating cement is predicted.

• 시멘트 심포지엄
• /
• 통권34호
• /
• pp.129-137
• /
• 2007

This paper presents a numerical model which can predict degree of cement mineral component, such as $C_3S$, $C_2S$, $C_3A$, $C_4AF$ and microstructure of hydrating cement as a function of water to cement ratio, cement particle size distribution, cement mineral components and temperature. In this model cement particles are parked randomly in cell space and hydration process is described using a multi-component intergrated kinetic model. The simulation result of degree of hydration of cement mineral component agrees well with experiment result. The content of cement hydration product, such as CSH and CH can be obtained as an accompanied result during hydration process. By introducing of equal-area projection method, water withdrawl mechanism and contact area among cement particles can be considered in detail. By using proposed method, pore size distribution of hydrating cement is predicted.

• 한국태양에너지학회 논문집
• /
• 제21권1호
• /
• pp.43-49
• /
• 2001

Informations of the solar radiation component are essential for modeling various solar energy systems. These Informations are particularly used for middle and high temperature applications, those need concentrating direct normal insolation. In order to estimate the performance of concentrating systems, it is necessary to know the intensity of the beam radiation, as only this component can be concentrated. The Korea Institute of Energy Research(KIER) has began collecting solar radiation component data since August, 1996. KIER's component data will be extensively used by concentrating system users or designers as well as by research institutes.

• 천문학회보
• /
• 제36권1호
• /
• pp.30.2-30.2
• /
• 2011

Dust species in the envelopes around AGB stars would have multiple components rather than a single component. Each dust species may have its own temperature and density structure. We use the radiative transfer code RADMC-3D developed by Dullemond et al. 2011 to model the multi-component dust envelopes around O-rich AGB stars. For reasonable combinations of physical and chemical parameters of the dust envelopes, we use multi-component dust species of silicate, corundum, and water ice. We find that the new model results can explain the observations of O-rich AGB stars better than conventional models.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.140-143
• /
• 2000

The primary function of ZnO lightning arrester is to protect transmission and distribution equipment from overvoltages and to absorb electrical energy resulting from lightning or switching surges and form temporary overvoltage. However, ZnO lightning arrester are known to exhibit an increases in resistive current with time, the rate of increase being exacerbated with increasing applied voltage and ambient temperature. So, it is important to the leakage current measurement of ZnO lightning arrester. In addition, since the resistive leakage current caused by deterioration of ZnO lightning arrester mainly caused an increase of the third harmonic component, thereby it is possible the arrester degradation diagnosis by measuring the third harmonic component in the total leakage current. The leakage current and third harmonic component are measured and used to investigate the degradation diagnosis of ZnO element of arrester. Also the SEM photography is used to investigate the change of crystal structure of ZnO element with degradation.