• International Journal of Aeronautical and Space Sciences
• /
• 제4권2호
• /
• pp.9-16
• /
• 2003

Piezoelectric materials are widely used to construct smart or adaptive structures. Although extensive efforts have been devoted to the analysis of piezoelectric materials in recent years, most researches have been conducted by assuming that the material properties are fixed and have no uncertainties. Intrinsically, material properties have a certain amount of scatter and such uncertainties can affect the performance of component. In this paper, the convex modeling is used to consider such uncertainties in calculating the crack extension force of piezoelectric material and the results are compared with the one obtained via the Monte Carlo simulation. Numerical results show that crack extension forces increase when uncertainties considered, which indicates that such uncertainties should not be ignored for reliable lifetime prediction. Also, the results obtained by the convex modeling and the Monte Carlo simulation show good agreement, which demonstrates the effectiveness of the convex modeling.

• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.29-41
• /
• 1992

According to the recent increase of demands for multi-function and economics on hydraulic excavator, it is required that excavator should have simple operation, higher and operational efficiency, however the modeling of engine/pump system of excavator is not prescribed by the paper. So, in this paper the modeling of engine/pump system of excavator is suggested by identification method from step response and verified effectiveness of identification system by comparing with experimental results which was conducted using PID controller. To improve the problem of parameter variation and modeling error in the system, sliding mode control was introduced and new switching surface was designed. This control algorithm was applied to a hydraulic excavator by simulation, and its effectiveness was verified, and the results of variable structure system for the excavator system using a output component was compared with that of full state feedback when load disturbances and system paramenter variation exist.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.209-217
• /
• 2003

In this paper, the dynamic system modeling and the state sensitivity analysis of the spin-coater system are proposed for the reduction of the vibration. In the respect of modeling, the spin-coater system is considered to be composed of servomotor, spindle, supporting base and so on. Each component of model is combined and derived to 3 dimensional equations. The combined model is verified by experimental values of actual system in the frequency domain. By direct differentiation of the constraint equations with respect to kinematic design variables, such as eccentricity of spindle, moment of inertia, rotational stiffness and damping of supported base, sensitivity equations are derived to the verified state equations. Sensitivity of design variables could be used for vibration reduction and natural frequency shift in the frequency domain. Finally, dominant design variables are selected from the sensitivity analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.991-993
• /
• 1997

This paper presents a novel modeling methodology for STATCON and relevant controller using EMTP. It also provides with an idea for suppressing numerical oscillation that usually occur at switching operation by incorporating resistor component of STATCON into system modeling. Some simulation results validate propriety of methodology the proposed for modeling of system and suppressing numerical oscillation.

• 한국전자거래학회지
• /
• 제4권1호
• /
• pp.145-157
• /
• 1999

The challenge is to maximize the time-to-market benefits of concurrent engineering while maintaining control of data and distributing it automatically to the people who need it when they need it. The way PDM systems cope with this challenge is that master data is held only once in a secure vault where its integrity can be assured and all changes to it monitored, controlled and recorded. The structure of PDM is various from vendor, but they have common module. That is PDM and it is most important. The goal is to design the workflow in PDM using object-oriented modeling method. The past methods have concentrated on the flow between workflow engine and agent, but this paper will focus on task. We will model task as individual object. This paper uses OMT(Object Modeling Technique) by James Rumbaugh for base modeling tool and uses DCOM(Distributed Component Object Model) for base ORB(Object Request Broker). Research object is to design the static object model, to design state change by dynamic model and to design data transition by functional model.

• Wind and Structures
• /
• 제22권5호
• /
• pp.543-553
• /
• 2016

The growing complexity of modern technological systems requires more flexible and powerful reliability analysis tools. Existing tools encounter a number of limitations including lack of modeling power to address components interactions for complex systems and lack of flexibility in handling component failure distribution. We propose a reliability modeling framework based on the Bayesian network (BN). It can combine historical data with expert judgment to treat data scarcity. The proposed methodology is applied to wind turbines reliability analysis. The observed result shows that a BN based reliability modeling is a powerful potential solution to modeling and analyzing various kinds of system components behaviors and interactions. Moreover, BN provides performing several inference approaches such as smoothing, filtering, what-if analysis, and sensitivity analysis for considering system.

• 천문학회보
• /
• 제43권2호
• /
• pp.40.3-40.3
• /
• 2018

This dissertation presents the results on two-dimensional Redshift space distortion (hereafter RSD) analyses of the large-scale structure of the universe using spectroscopic data and on improvement of modeling of the RSD effect. RSD is an effect caused by galaxies' peculiar velocity on their clustering feature in observation along the line of sight and is thus intimately connected to the growth rate of the structure in the universe, from which we can test the origin of cosmic acceleration and Einstein's theory of gravity at cosmic scales in the end. However, there are several challenges in modeling precise and accurate RSD effect, such as non-linearities and the existence of an exotic component, e.g. massive neutrino. As part of endeavors for modeling more precise and accurate galaxy clustering in redshift space, this dissertation includes a series of works for this issue. (More detailed descriptions were omitted.)

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.803-808
• /
• 2018

Combining digital automation solutions throughout recent manufacturing process is essential. Advanced robot and mechanical techniques are required for design, manufacture, and distribution process. Manual design of repetitive similar mechanical components during the development phase of these advanced machines and robots can occur wasting time and money. Developed gear design module, which is the power transfer system mechanical component, was programmed in the Visual Basic language in CATIA V5 environment. Automation Process is Based on Parametric Modeling Method. and it was found to be effective in reducing design time compared to designers manual modeling.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제31권8호
• /
• pp.1027-1042
• /
• 2004

소프트웨어 컴포넌트는 단일 시스템에서 사용하기보다는 다수의 시스템 혹은 기업, 프로젝트간에 재사용하기 위한 소프트웨어 모듈이다. 컴포넌트가 다양한 시스템에서 재사용되기 위해서는 여러 시스템에서 요구되는 공통적인 기능을 제공하는 것뿐만이 아니라 업무상에서 나타나는 다양한 가변적 측면들이 고려되어 고객의 요구에 맞도록 커스터마이즈 될 수 있어야 한다. 사용자가 컴포넌트를 쉽게 사용하기 위해서는 개발 단계에서부터 가변적인 측면이 고려된 컴포넌트가 설계되어 구현되어야 한다. 가변성을 고려하여 쉽게 커스터마이즈 될 수 있는 컴포넌트는 여러 어플리케이션에서 높은 재사용성을 가지게 될 것이다. 기존에 제시된 커스터마이즈 기법들은 소프트웨어가 가지는 가변적인 요소를 어떻게 설계할지에 대해 객체 지향에 기반하여 개념적인 방법만을 제시하고 있으며, 컴포넌트에 적합한 가변성을 고려하고 있는 기법은 드문 실정이다. 따라서 개발이 완료되어 배포된 블랙 박스 형태의 컴포넌트를 커스터마이즈 하기에는 적합하지 않다. 본 논문에서는 컴포넌트가 가지는 기능적인 측면에서의 가변성을 논리와 워크플로우 두 가지로 분류하여 각각의 가변성을 설계하기 위한 선택형, 플러그인, 외부화 세 가지 기법들을 제시한다. 또한 실용적으로 기법들을 적용하기 위해 상세한 설계 지침과 적용 지침들도 제시한다.

• 한국추진공학회지
• /
• 제17권1호
• /
• pp.70-79
• /
• 2013

본 연구에서는 중형 항공기의 추진 기관인 2 스풀 분리-배기 형식 터보팬 엔진 (BR715-56)의 성능 해석을 수행하기 위하여 상용코드인 MATLAB/SIMULINK를 이용하여 성능모델을 구성하였으며 유량 및 일 조합에 새로운 조합 서브시스템 블록을 새로이 개발하였다. 성능 모사는 먼저 팬, 고압압축기, 고압터빈, 저압터빈 구성품 성능 맵들을 축척방법을 이용하여 유사성능 맵들로 부터 생성하였고, 다음은 탈설계점 성능 해석을 할 수 있도록 구성품들 간 유량과 일 조합이 이루어 질수 있도록 하였다. 제안된 SIMULINK 성능모델은 정상 및 동적 모사와 사용자 편의의 장점을 가지고 있으며, 다양한 작동 조건들에서 개발된 프로그램을 이용한 탈설계점 해석 결과들이 GASTURB에 의한 해석 결과들과 잘 일치함이 확인 되었다.