• Korea-Australia Rheology Journal
• /
• 제16권4호
• /
• pp.213-218
• /
• 2004

Linear high-density polyethylene (PE) was controlled to induce strain-hardening behavior by introducing a small amount of second component with an anisotropic structure. In order to form an anisotropic structure in the PE matrix, the polymer was extruded through a twin-screw extruder, and the structure was controlled by varying the extrusion conditions. Depending on conditions, the second component formed a film, thread and droplet structure. If the second component was kept rigid, the morphology evolution could be delayed and the second component could maintain its film or thread structure without further relaxation. In par­ticular, the second component of the thread structure made a physical network and gave rise to remarkable strain hardening behavior under high extension. This study suggests a new method that induces strain hard­ening behavior by introducing a physically networked second component into the linear polymer melt. This result is anticipated to improve the processibility of linear polymers especially when extensional flow is dominant, and to contribute to our understanding of strain hardening behavior.

• Earthquakes and Structures
• /
• 제23권2호
• /
• pp.169-181
• /
• 2022

To research the dynamic response of the high-rise structure under the rocking ground motion, which we believed that the effect cannot be ignored, especially accompanied by vertical ground motion. Theoretical analysis and shaking table seismic simulation tests were used to study the response of a high-rise structure to excitation of a H-V-R ground motion that included horizontal, vertical, and rocking components. The use of a wavelet analysis filtering technique to extract the rocking component from data for the primary horizontal component in the first part, based on the principle of horizontal pendulum seismogram and the use of a wavelet analysis filtering technique. The dynamic equation of motion for a high-rise structure under H-V-R ground motion was developed in the second part, with extra P-△ effect due to ground rocking displacement was included in the external load excitation terms of the equation of motion, and the influence of the vertical component on the high-rise structure P-△ effect was also included. Shaking table tests were performed for H-V-R ground motion using a scale model of a high-rise TV tower structure in the third part, while the results of the shaking table tests and theoretical calculation were compared in the last part, and the following conclusions were made. The results of the shaking table test were consistent with the theoretical calculation results, which verified the accuracy of the theoretical analysis. The rocking component of ground motion significantly increased the displacement of the structure and caused an asymmetric displacement of the structure. Thus, the seismic design of an engineering structure should consider the additional P-△ effect due to the rocking component. Moreover, introducing the vertical component caused the geometric stiffness of the structure to change with time, and the influence of the rocking component on the structure was amplified due to this effect.

• Journal of the Korean Data and Information Science Society
• /
• 제17권1호
• /
• pp.141-147
• /
• 2006

BOK-X12-ARIMA has been developed by the Bank of Korea in order to accomodate special features such as lunar effect, labor day and election effect which are intrinsic in Korean seasonal time series. Irregular component resulting from BOK-X12-ARIMA is usually treated as white noise time series. If this shows dependency structure, it may be advisable to incorporate dependency in irregular component into prediction. This article illustrates how to refine point forecast using dependency structure in irregular component.

• 한국산업정보학회논문지
• /
• 제20권4호
• /
• pp.75-87
• /
• 2015

중복시스템의 일반적인 구조는 기능을 수행하는 주요부품과 주요부품이 고장 나는 경우에 그 기능을 대신 수행하는 대기부품으로 구성되어 있다. 본 연구에서는 하나의 대기부품이 여러 개의 주요부품의 기능을 동시에 대신 수행할 수 있는 다기능 대기부품을 갖는 병렬시스템을 고려한다. 이 시스템을 구성하고 있는 모든 부품들은 작동상태와 고장상태만 갖는 반면 시스템은 구성 부품들의 상태에 따라 다중 상태를 갖는 것을 가정한다. 이러한 중복구조는 항공기와 같이 시스템의 중량이 중요한 요소인 시스템에서 많이 채택되고 있는 구조이다. 본 연구에서는 이와 같은 중복시스템의 신뢰도를 평가하기 위한 새로운 신뢰도모델링 기법을 제안하고 부품들이 상수고장률을 갖는 경우 마코프 분석 방법을 적용하여 시스템의 신뢰도를 구한다. 또한 본 연구에서 고려하고 있는 시스템과 기존에 이미 알려진 병렬시스템과 중복구조를 갖는 병렬시스템의 신뢰도를 비교하여 다기능 대기부품의 효과를 분석한다.

• 산업공학
• /
• 제17권2호
• /
• pp.190-199
• /
• 2004

Recently, many enterprises are introducing a workflow management system for the successful implementation of BPR(Business Process Reengineering). Proposed in this study is the workflow management system which has a light-weight component structure and an XPDL(XML Process Definition Language) file interpretation facility. The XPDL is the standard process definition exchange format developed by WfMC(Workflow Management Coalition). The major causes of inefficiency at current implementations of workflow management systems are the centralized workflow engine structure and the use of proprietary workflow definition format among most solutions. The proposed light-weight component structure in this study is the intermediate structure that takes the strength of both centralized and distributed workflow engines. And a prototype workflow system which uses an XPDL process definition file as input is developed through the thorough analysis of functional requirements.

• 한국농공학회논문집
• /
• 제56권3호
• /
• pp.1-9
• /
• 2014

The aim of this study is to develop a simulation model for analyzing 2D truss structure using Generic Agricultural System Simulator (GASS). Although the truss is simple structure, numerical methods based on matrix analysis are cumbersome and complicated. This study suggests simple and convenient methods to remove calculating steps for whole stiffness matrices. The simulation environment based on independency of object-oriented components on GASS consists of component development and component deploy stages. A component for a truss structure is implemented based on equilibrium equations at nodes. The simulator can analyze truss structures through deploying components with attributes and links. The examples using GASS show intuitive graphical results of the movements of truss nodes.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.179-187
• /
• 2013

We describe newly developed software named KPACK for relativistic electronic structure computation of molecules containing heavy elements that enables the two-component ab initio calculations in Kramers restricted and unrestricted formalisms in the framework of the relativistic effective core potential (RECP). The spin-orbit coupling as relativistic effect enters into the calculation at the Hartree-Fock (HF) stage and hence, is treated in a variational manner to generate two-component molecular spinors as one-electron wavefunctions for use in the correlated methods. As correlated methods, KPACK currently provides the two-component second-order M${\o}$ller-Plesset perturbation theory (MP2), configuration interaction (CI) and complete-active-space self-consistent field (CASSCF) methods. Test calculations were performed for the ground states of group-14 elements, for which the spin-orbit coupling greatly influences the determination of term symbols. A categorization of three procedures is suggested for the two-component methods on the basis of spin-orbit coupling manifested in the HF level.

• 한국자기공명학회논문지
• /
• 제16권2호
• /
• pp.133-146
• /
• 2012

Three different derivatives were obtained in the synthesis of cobalt-binding BLM-A2 and characterized by NMR and Mass spectrometry. It was found that Component 1 is Co(II)($2H_2O$)(BLM-A2), component 2 is Co(III)($OOH^-$)(BLM-A2) and component 3 is Co(III)($H_2O$)($OH^-$)(BLM-A2), respectively. Component 2 and 3 were interestingly dominated when CoBLM-A2 complex was synthesized under basic condition. In this experiment, it was revealed newly that the brown form (component 1) was 6-coordinated structure composed with not 5 ligands but 4 ligands from BLM-A2 and with $2H_2O$ as the axial ligands. The component 3 exhibiting a novel ligand configuration is found, and the structure of component 3 was observed to be very similar to that of component 1 in the kind of their ligands but one of the axial ligand is $OH^-$ instead of $H_2O$. These ligand configurations are different from the green form (component 2) exhibiting 6-coordinate structure composed of 5 ligands from BLM-A2 and one ligand of $OOH^-$, being consistent with former studies.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1871-1884
• /
• 1997

This paper describes the design process of a 3-component load cell with a multiple parallel plate structure which may be used to measure transverse forces and twisting moment simultaneously. Also we have derived equations to predict the bending strains on the surface of the beams in the multiple parallel plate structure under transverse force or twisting moment. It reveals that the bending strains calculated from the derived equations are in good agreement with the results from finite element analysis and experiment. Also we have evaluated the rated output and interference error of each component, which can be efficiently used to design a 3-component load cell with a multiple parallel plate structure.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1503-1509
• /
• 1994

An analysis method is suggested and experimentally studied in order to solve a vibration problem of a flexible structure while it is moving. In this method, substructure synthesis method, modal analysis method and Newmark's integral method were used. Total deformation of a structure was composed of quasistatic component and dynamic component. Rigid body modes were considered in calculation of dynamic component. Combining those two component, deformation behavior and a real structural model of a transfer feeder showed good agreements with computational results.