• Asia pacific journal of information systems
• /
• 제15권1호
• /
• pp.115-133
• /
• 2005

This study is to develop an information security management model(ISMM) for small and medium sized enterprises(SMEs). Based on extensive literature review, a five-pillar twelve-component reference ISMM is developed. The five pillars of SME's information security are: centralized decision making, ease of management, flexibility, agility and expandability. Twelve components are: scope & organization, security policy, resource assessment, risk assessment, implementation planning, control development, awareness training, monitoring, change management, auditing, maintenance and accident management. Subsequent survey designed and administered to expose experts' perception on the importance of these twelve components revealed that five out of tweleve components require relatively immediate attention than others, especially in SME's context. These five components are: scope and organization, resource assessment, auditing, change management, and incident management. Other seven components are policy, risk assessment, implementation planning, control development, awareness training, monitoring, and maintenance. It seems that resource limitation of SMEs directs their attention to ISMM activities that may not require a lot of resources. On the basis of these findings, a three-phase approach is developed and proposed here as an SME ISMM. Three phases are (1) foundation and promotion, (2) management and expansion, and (3) maturity. Implications of the model are discussed and suggestions are made for further research.

• Industrial Engineering and Management Systems
• /
• 제9권3호
• /
• pp.227-241
• /
• 2010

A memory module industry's supply chain usually consists of multiple manufacturing sites and multiple distribution centers. In order to fulfill the variety of demands from downstream customers, production planners need not only to decide the order allocation among multiple manufacturing sites but also to consider memory module industrial characteristics and supply chain constraints, such as multiple material substitution relationships, capacity, and transportation lead time, fluctuation of component purchasing prices and available supply quantities of critical materials (e.g., DRAM, chip), based on human experience. In this research, a directed graph-based supply network planning (DGSNP) model is developed for memory module industry. In addition to multi-site order allocation, the DGSNP model explicitly considers production planning for each manufacturing site, and purchasing planning from each supplier. First, the research formulates the supply network's structure and constraints in a directed-graph form. Then, a proposed genetic algorithm (GA) solves the matrix form which is transformed from the directed-graph model. Finally, the final matrix, with a calculated maximum profit, can be transformed back to a directed-graph based supply network plan as a reference for planners. The results of the illustrative experiments show that the DGSNP model, compared to current memory module industry practices, determines a convincing supply network planning solution, as measured by total profit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.91-94
• /
• 1996

A simulation procedure was developed for identifying Yungnam unit 2 excitation model parameters to improve the accuracy of stability simulation of KEPCO. First, generator model parameters are derived by using modified load rejection technique from measured load rejection test. For identifying excitation model parameters, switch was changed from MVR mode to AVR mode in Yungnam unit 2 excitation system instead of applying to a small step to the voltage reference($V_{ref}$) because of saving time and efforts, assuming the test result would show coincided result with applying to a small step to the $V_{ref}$. However, it was found that the response of switching from MVR to AVR is greatly different from it of applying small signal to the $V_{ref}$. A simulation procedure was needed to take into accounts of real AVR component status before and after switching from MVR to AVR. This paper reports the procedure which duplicated the measured response and addresses the merits of this test on conventional AVR step test.

• 정보처리학회논문지D
• /
• 제8D권6호
• /
• pp.789-798
• /
• 2001

지능형 교통 시스템(ITS)은 정보 처리, 통신, 제어, 전자 등 다양한 첨단 기술들로 구성되며 이러한 기술들을 교통 시스템에 접목함으로써 더욱 안전한 인명 구조 및 시간과 경비 절감을 더욱 효율적으로 추구하게 된다. 국가 ITS 아키텍쳐는 지능형 교통 시스템을 설계, 정의, 통합하기 위한 공통적 프레임워크를 제공하며 대부분의 ITS 과제들은 모든 표준화 작업을 총괄하는 기준 프레임워크인 국가 아키텍쳐에 따라 설계 및 구현되고 있다. 최근 소프트웨어 기술이 급속히 개선되고 안정화됨에 따라 미리 개발된 강력한 ITS 기술도 재 사용할 필요성이 있다. 컴포넌트와 개방형 인터페이스에 기반한 ITS 표준화는 현재 ITS 기술의 재사용성 문제를 해결하는 방법이 된다. 본 논문은 국가 ITS 아키텍쳐에 기반한 ITS 컴포넌트를 설계하고 구현하는 방법에 중점을 두고 있으며 첨단교통정보제공 시스템(ATIS) 컴포넌트 개발 과정에서 실제 UML을 이용한 설계와 분석이 수행되었다. 이 UML 방법은 새로 개발되는 ITS 컴포넌트를 위한 표준화된 모델을 제공할 것으로 기대된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.590-593
• /
• 2004

Extraction of ocean surface current velocity offers important physical oceanographic parameters especially on understanding ocean environment. Although Remote Sensing techniques were highly developed, the investigation of ocean surface current using Synthetic Aperture Radar (SAR) is not an easy task. This paper presents the results of ocean surface current observation using Doppler Centroid of ERS-1 SAR data obtained off the coast of Korea peninsula. We employed the concept, in which Doppler frequency shift and the ocean surface current are closely related, to evaluate ocean surface current. Moving targets cause Doppler frequency shift of the back scattered radar waves of SAR, thus the line-of-sight velocity component of the scatters can be evaluated. The Doppler frequency shift can be measured by estimating the difference between Doppler Centroid of raw SAR data and reference Doppler Centroid. Theoretically, the Doppler Centroid is zero; however, squinted antenna which is affected by several physical factors causes Doppler Centroid to be nonzero. The reference Doppler Centroid can be obtained from measurements of sensor trajectory, attitude and Earth model. The estimated Doppler Centroid was compensated by considering the accurate attitude estimation of ERS-1 SAR. We could verify the correspondence between the estimated ocean surface current and observed in-situ data in the error bound.

• 조명전기설비학회논문지
• /
• 제14권5호
• /
• pp.66-73
• /
• 2000

본 논문에셔는 3고초파를 주입한 정현파 PWM 인버터의 과변조 영역에서 인버터를 전형적으로 제어하기 위한 새로운 방법을 제시한다. 정현파 PWM에 3고조파를 삽입하면 단순한 정현파 PWM에 비해 선형영역을 확장할 수 있다. 그러나 이 경우에도 선형영역은 six-step 인버터메 비해 90% 정도가 된다. 따라서 과변조 영역에서 변조지수와 인버터 출력의 기본파 전압의 크기에 대한 관계를 분석함으로써, 과변조 영역에서 기준전압올 보정해 줄 수 있다. 보정된 기준 전압을 명령값으로 사용하게 되므로 반복 계산 없이 3고조파 주입형 정현파 PWM에서 출력전압을 SIX-step에샤의 전압에 이로는 과변조 영역까지 선형적으로 제어가 가능하다. 인버터-유도전동기시스템에 대한 시뮬레이션 결과를 통하여 이를 확인하였다.

• 한국항행학회논문지
• /
• 제15권4호
• /
• pp.672-679
• /
• 2011

본 논문에서는 텔레비전 칼라영상에서 사람의 피부색을 기반으로 얼굴영역을 검출하는 방법을 제안하였다. 제안된 방법은 피부색을 샘플링하여 기준영상으로 놓고, 텔레비전 영상의 화소와 기준영상의 화소 사이의 유클리디안(Euclidean) 거리를 이용하여 얼굴후보 영역결정을 하였다. 얼굴 후보영역에서 눈 검출은 RGB 칼라를 CMY칼라 모델로 변환 하여 Y와 C 사이의 색차성분에 대한 평균값과 표준 편차를 이용하여 검출 하였다. 입술 영역은 RGB 칼라모델에서 YIQ 칼라 공간으로 변환 하여 Q 요소로 입술 영상을 검출 하였다. 얼굴영역 검출은 눈 영상과 입술 영상을 논리연산 하여 지식 기반으로 결정 하였다. 제안된 방법의 타당성을 입증하기 위하여 텔레비전 칼라영상에서 입력받은 정면 칼라 영상으로 실험한 결과, 얼굴영역 검출이 얼굴의 위치와 크기에 관계없이 검출됨을 보였다.

• 자원환경지질
• /
• 제45권4호
• /
• pp.377-384
• /
• 2012

다목적위성인 아리랑 2호 (KOMPSAT-II)에 장착된 위성의 자세제어를 위한 삼축자력계(Triaxial Magnetometer, TAM)에서 측정된 지구자기장의 삼성분 자료로부터 지구 외핵에서부터 오는 주지구자기장 (main geomagnetic field)의 모델을 계산하였다. 일반적으로 지자기 표준모델이라고도 일컫는 IGRF(International Geomagnetic Reference Model)과의 비교를 통해 제작된 모델과의 상관성을 연구하였다. 선행연구에서는 KOMPSAT-I의 3일 자료만을 통해 제작한 것과 달리 2007년 11월과 12월 자료를 항공우주연구원의 협조를 받아 모델에 활용하였다. 선행 연구에서는 구면조화 함수의 차수가 5까지의 유사성을 보인 반면 이번에 얻은 모델은 차수 8-9까지 유사성을 보이며 그 이후 차수 13까지 계산에서는 국제표준모델과 많은 차이를 나타내었다. KOMPSAT-II 자료를 통한 지구자기장 모델을 제작하는 데 있어서 적절한 자료선별과정과 이와 관련된 극지방자료의 포함여부와 외부자기장성분의 적절한 제거 및 위성에 탑재한 측정자력계의 정확도가 국제지자기표준모델과의 유사성 여부에 중요한 요소로 작용하였다. 수년간의 자료입수가 가능할 경우 지구자기장의 영년변화연구에도 지상의 지자기관측소자료와 함께 KOMPSAT-II 자료의 활용이 기대된다.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.369-382
• /
• 2014

A growing dynamic electrical demand has created an increasing interest in utilizing nonconventional energy sources like Photovoltaic (PV), wind power, etc. In this context, this paper focuses on the design and development of a composite power controller (CPC) in the decoupled double synchronous reference frame (DDSRF) combining the advantages of direct power control (DPC) and voltage oriented control (VOC) for a PV sourced grid connected inverter. In addition, a controller with the inherent active filter configuration is tested with nonlinear and unbalanced loads at the point of common coupling in both grid connected and autonomous modes of operation. Furthermore, the loss and reactive power compensation due to a non-fundamental component is also incorporated in the design, and the developed DDSRF model subsequently allows independent active and reactive power control. The proposed developed model of the controller is also implemented using MATLAB-Simulink-ISE and a Xilinx system generator which evaluate both the simulated and experimental setups. The simulation and experimental results confirm the validity of the developed model. Further, simulation results for the DPC are also presented and compared with the proposed CPC to further bring out the salient features of the proposed work.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권1호
• /
• pp.42-46
• /
• 2003

Arresters are deteriorated by overvoltages or impulse currents, and the resistive leakage current of arresters increases as the deterioration of the arrester progresses, showing an increase in the 3$^{rd}$ harmonic component of the leakage current. In this reason, arrester diagnostic techniques based on the 3$^{rd}$ harmonic leakage current as a reference parameter of deterioration are widely used. The technique, however, includes an error due to the harmonics of power system voltage. Therefore, the influence of the harmonics on arrester diagnostics should be considered. In this paper, we designed a PSpice ZnO arrester model to simulate the influence of the voltage harmonics described above. A pure sinusoidal voltage and its the 3r harmonic voltage were applied to the model, and the leakage current components were analyzed. From the simulation results, it is confirmed that the peak value of resistive leakage current depends not only on the phase of the 3$^{rd}$ harmonic voltage but also on the magnitude of it. Consequently, the errors caused 1)y the harmonic voltage could be minimized by correcting the magnitude of leakage current upon analyzing the harmonics.cs.