• Journal of the Korean Society of Safety
• /
• 제33권6호
• /
• pp.15-21
• /
• 2018

Ships may collide with reefs or other objects during operation, when arriving or departing ports. The hull plate may be damaged due to the contact with other ships. The total number of domestic powered fishing vessels has decreased, but that of FRP fishing vessels has increased by 0.7% and the ratio of FRP fishing vessels to the total fishing vessels increased to 96%. Recently, fishing vessels has been used as fishing boats for income of non-fishermen as well as fishermen. Therefore, safety management for repair and maintenance is necessary. The penetration of moisture and moisture in the composite material such as FRP may deteriorate the mechanical properties and the salt (NaCl) component of the damaged portion may cause a relatively high deterioration in material strength. The gel coat painting is the final stage of repairs ans maintenance of FRP fishing vessels. The thickness criteria in the domestic and foreign gel coat is 0.3~0.762 mm. The joint specimens, which was immersed in seawater for 120 days, were compared with those without seawater immersion. As a result, the tensile strength was 83 ~ 121.8% and the flexural strength was 83 ~ 113% compared with the specimens without seawater immersion. According to the previous study the tensile strength decreased by more than 29% and the flexural strength decreased by more than 50% when the composite material was immersed in seawater for 1,083 hours without coating. As a result, it was found that the gel coat with 0.5 mm thickness is very effective in preventing the strength decrease of the composite material.

• Journal of Broadcast Engineering
• /
• 제24권2호
• /
• pp.264-272
• /
• 2019

In this paper, we propose a 3D human body reconstruction and refinement method from the frames extracted from a video to obtain natural and smooth motion in temporal domain. Individual frames extracted from the video are fed into convolutional neural network to estimate the location of the joint and the silhouette of the human body. This is done by projecting the parameter-based 3D deformable model to 2D image and by estimating the value of the optimal parameters. If the reconstruction process for each frame is performed independently, temporal consistency of human pose and shape cannot be guaranteed, yielding an inaccurate result. To alleviate this problem, the proposed method analyzes and interpolates the principal component parameters of the 3D morphable model reconstructed from each individual frame. Experimental result shows that the erroneous frames are corrected and refined by utilizing the relation between the previous and the next frames to obtain the improved 3D human reconstruction result.

• Journal of the Korean Society of Systems Engineering
• /
• 제16권2호
• /
• pp.118-130
• /
• 2020

Modern weapon systems are composed of complex systems(System of Systems) and require a complex and advanced operational concept that performs missions through interoperability with various weapon systems. In order to derive the operational concept of the weapon system that the military wants to acquire (i.e., single mission, component operation, Joint and Alliance operations), it is necessary to identify the system related to the weapon system, environmental factors and restrictions of the weapon system to be developed. Through the derivation of the operational concept, the weapon system acquisition agency can reasonably and accurately extract various and complex requirements. In this paper, we propose a complementary method of using MND-AF to OCD and ORD required in weapon system acquisition process. MND-AF can increase the understanding and consensus of business stakeholders (users, acquirers, developers, etc.) by showing the results of weapon system analysis from various perspectives. We compare the items in the standard form of OCD and ORD with the MND-AF outputs.

• The Korea Journal of Herbology
• /
• 제29권4호
• /
• pp.35-44
• /
• 2014

Objectives : Evodia rutaecarpa (Juss.) Benth.(ER) and Chaenomeles sinensis Koehne (CS) have multiple applications and were known to have anti-inflammatory effects. In the current study, we investigated to clearly understand the mechanism of therapeutic role for CS, ER and their combination in CIA model mice. Methods : DBA/1OlaHsd mice were immunized with bovine type II collagen. After a second collagen immunization, mice were treated with CS, ER and their combination once a day for 7 weeks. Cytokine production and gene expression were assessed during CIA (collagen-induced arthritis) model mice in knee joint, lymph node (LN) using ELISA and FACS analysis. The severity of arthritis within the knee joints was evaluated by histological assessment of cartilage destruction and pannus formation. Result : Oral administration of CS, ER and their combination (150 mg/kg) significantly suppressed the progression of CIA, and significantly suppressed the progression of CIA and inhibited the production of TNF-${\alpha}$ and IL-6 in serum. The erosion of cartilage was dramatically reduced in mouse knees after treatment with CS plus ER. Conclusion : These result suggest that CS plus ER significantly suppressed the progression of CIA and that this action was characterized by the decreased production of TNF-${\alpha}$, IL-6 and collagen II specific antibody in serum.

• Journal of the Semiconductor & Display Technology
• /
• 제21권4호
• /
• pp.65-70
• /
• 2022

In manufacturing and semiconductor industries, transfer robots increase productivity through accurate and continuous work. Due to the nature of the semiconductor process, there are environments where humans cannot intervene to maintain internal temperature and humidity in a clean room. So, transport robots take responsibility over humans. In such an environment where the manpower of the process is cutting down, the lack of maintenance and management technology of the machine may adversely affect the production, and that's why it is necessary to develop a technology for the machine failure diagnosis system. Therefore, this paper tries to identify various causes of failure of transport robots that are widely used in semiconductor automation, and the Prognostics and Health Management (PHM) method is considered for determining and predicting the process of failures. The robot mainly fails in the driving unit due to long-term repetitive motion, and the core components of the driving unit are motors and gear reducer. A simulation drive unit was manufactured and tested around this component and then applied to 6-axis vertical multi-joint robots used in actual industrial sites. Vibration data was collected for each cause of failure of the robot, and then the collected data was processed through signal processing and frequency analysis. The processed data can determine the fault of the robot by utilizing machine learning algorithms such as SVM (Support Vector Machine) and KNN (K-Nearest Neighbor). As a result, the PHM environment was built based on machine learning algorithms using SVM and KNN, confirming that failure prediction was partially possible.

• Earthquakes and Structures
• /
• 제26권5호
• /
• pp.383-400
• /
• 2024

For a conventionally repaired frame-supported-transfer-slab (FSTS) reinforced concrete (RC) structure, both the transfer slab and the beam-to-column and transfer slab-to-column joints remain vulnerable to secondary earthquakes. Aimed at improving the seismic performance of a damaged FSTS RC structure, an innovative retrofitting scheme is proposed, which adopts the sector lead rubber dampers (SLRDs) at joints after the damaged FSTS RC structure is repaired by conventional approaches. In this paper, a series of quasi-static cyclic tests was conducted on a large-scale retrofitted FSTS RC structure. The seismic performance was evaluated and the key test results, including deformation characteristics, damage pattern, hysteretic behaviour, bearing capacity and strains on key components, were reported in detail. The test results indicated that the SLRDs started to dissipate energy under the service level earthquake, and thus prevented damages on the beam-to-column and transfer slab-to-column joints during the secondary earthquakes and shifted the plastic hinges away from the beam ends. The retrofitting scheme of using SLRDs also achieved the seismic design concept of 'strong joint, weak component'. The FSTS RC structure retrofitted by the SLRDs could recover more than 85% bearing capacity of its undamaged counterpart. The hysteresis curves were featured by the inverse "S" shape, indicating good bearing capacity and hysteresis performance. The deformation capacity of the damaged FSTS RC structure retrofitted by the SLRDs met the corresponding codified requirements for the case of the maximum considered earthquake, as set out in the Chinese seismic design code. The stability of the FSTS RC structure retrofitted by the SLRDs, which was revealed by the developed stains of the RC frame and transfer slab, was improved compared with the undamaged FSTS RC structure.

• Journal of Aerospace System Engineering
• /
• 제18권2호
• /
• pp.12-20
• /
• 2024

The application of reinforcement design to ensure the structural safety of electronics in small satellites is limited by the spatial constraints of the satellite structure during launch vibrations. Additionally, a reliable evaluation approach is needed for mounting highly integrated devices that are susceptible to fatigue failure. Although the Steinberg fatigue failure theory has been used to assess the structural integrity of electronic devices, recent studies have highlighted its theoretical limitations. In this paper, we propose a structural methodology based on the critical strain theory to design the digital control unit (DCU) of the X-band SAR payload component for the small SAR technology experimental project (S-STEP), a small satellite constellation. To validate the design, we conducted modal and random analyses using simplified modeling techniques. Based on our methodology, we ultimately demonstrated the structural safety of the electronics through analysis results, safety margin derivation, and functional tests conducted both before and after the launch test.

• Korean Medical Education Review
• /
• 제26권2호
• /
• pp.93-107
• /
• 2024

Interprofessional education (IPE) is relatively new in medical schools in South Korea. Since the introduction of IPE in 2022, its effective and sustainable implementation has been of great interest in medical schools. This study analyzed literature on the development of IPE in the United States, Canada, the United Kingdom, Australia, and Japan to explore strategies for successful IPE in Korean medical schools. A systematic literature search focused on institutionalizing IPE yielded 30 papers for review. The findings included the following crucial elements for effective IPE: (1) government or institutional-led support; (2) establishment of networks and partnerships; (3) development of standardized core competency frameworks for IPE; and (4) inclusion of IPE in accreditation standards. These aspects underscore the importance of IPE as an essential component of health professional education that should be effectively and sustainably implemented in academic settings. The study concludes that the successful integration and sustainable development of IPE in Korean health education will necessitate expanded and proactive governmental support. Moreover, promoting collaborations among universities, hospitals, and local healthcare institutions will be vital for creating synergies in implementing IPE programs. Establishing networks to develop and execute joint IPE initiatives and securing initial support for conceptualizing and developing competency frameworks will be critical. Additionally, forming consortia of healthcare accreditation bodies to collaboratively develop and incorporate IPE standards into evaluation criteria will be essential. Efforts to surmount these challenges will contribute to building a structural and institutional support system for the successful introduction and sustainability of IPE in Korea.

• Clinics in Shoulder and Elbow
• /
• 제13권1호
• /
• pp.72-78
• /
• 2010

Purpose: Too develop a flexible drill device that can be inserted into the shoulder joint so that arthroscopic transosseous suture repair for Bankart lesion is possible. Materials and Methods: We created a device composed of a flexible drill unit and a guide pipe unit. The flexible drill unit was made of flexible multifilament wires (1.2 mm in diameter) that was twisted into one cord so that it can flex in any direction and a drill bit (1.2 mm in diameter) that is attached onto one end of the flexible wire. The guide pipe unit was a 150 mm long metal pipe (2.0 mm in inner diameter and 3.0 mm in outer diameter), with one end bent to 30 degrees. The flexible drill set was inserted into the shoulder joint through the posterior portal of the joint. The guide pipe component was placed onto the medial wall of the glenoid so that the pipe was placed 5 mm posterior to the margin of the anterior glenoid rim. The flexible drill was driven through the glenoid by the power drill so that holes were made in the glenoid. A non- absorbable suture was passed through the hole. Tying of a sliding knot tying was accomplished over the capsule and labrum after making a stitch through the capsule and labrum with a suture hook loaded with suture passer. The same procedures were done at the 2 and 4 O'Clock positions of the glenoid. Results: Five cases with Bankart lesion received arthroscopic transosseous repair with our flexible drill device. There were no intraoperative problems. Neither redislocation nor subluxation was reported at final follow-up. Conclusion: Arthroscopic transosseous suture repair without suture anchors and easy tying of a sliding knot are possible with a flexible drill set.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제5권4호
• /
• pp.309-322
• /
• 2007

This study deals with the irradiation effects on some selected components which are being used in an Advanced Spent Fuel Conditioning Process (ACP). Irradiation test components have a higher priority from the aspect of their reliability because their degradation or failure is able to critically affect the performance of an ACP equipment. Components that we chose for the irradiation tests were the AC servo motor, potentiometer, thermocouples, accelerometer and CCD camera. ACP facility has a number of AC servo motors to move the joints of a manipulator and to operate process equipment. Potentiometers are used for a measurement of several joint angles in a manipulator. Thermocouples are used for a temperature measurement in an electrolytic reduction reactor, a vol-oxidation reactor and a molten salt transfer line. An accelerometer is installed in a slitting machine to forecast an incipient failure during a slitting process. A small CCD camera is used for an in-situ vision monitoring between ACP campaigns. We made use of a gamma-irradiation facility with cobalt-60 source for an irradiation test on the above components because gamma rays from among various radioactive rays are the most significant for electric, electronic and robotic components. Irradiation tests were carried out for enough long time for total doses to be over expected threshold values. Other components except the CCD camera showed a very high radiation hardening characteristic. Characteristic changes at different total doses were investigated and threshold values to warrant at least their performance without a deterioration were evaluated as a result of the irradiation tests.