The purpose of this study is to analyze concrete characteristics by admixing agent and additive contents according to the change of unit-water to identify its effect on compressive strength. First of all, as for flesh concrete, overall unit-water showed a tendency to decrease as component inclusion rate of admixing agent was increased. In addition, air content showed a tendency to increase by increasing WR, WB, NP series admixing agent contents, on the other hand, the change of air content was gentle by around $1.5{\pm}0.5%$ for S, T, M series agents. Bulk density showed an inverse proportion to the change of air content. As for hardened concrete, expression rate of 3-day age compressive strength was generally decreased for S, T, WR, WB, NP, M series admixing agent component. Also, expression rate of 7-day age compressive strength showed an excellent record for S, M series agents, and expression rate of 28-day age compressive strength showed a tendency to increase more than plain on the whole.
In order to clarify the effects of nonmetallic inclusion contents insteels (SM45C & SCM440) on the tool life, cutting experiment was performed under various cutting conditions. Tool life, cutting force, roughness of machined surface and cutting mechanism are examined on these two kinds of steel. The following conclusions were obtained from the analysis (1) Cutting force of the steels was not affected by chemical component and nonmetallic inclusion. (2) If the rate of amount, Ca/S has a value grater than about 0.2 and addition of less amount of Al, Mn, tool wear of tips decreasesinturning. (3) It is also proved that higher contents of nonmetallic inclusion improve roughness of the surface. (4) Less amount of Ca, higher amount of S, Mn and Al improve the chip breakability.
Tishita, Tasnina A.;Akhter, Sumiya;Islam, Md. Imdadul;Amin, M. Ruhul
Journal of Information Processing Systems
/
제10권3호
/
pp.459-470
/
2014
In this paper, the average probability of the symbol error rate (SER) and throughput are studied in the presence of joint spectrum sensing and data transmission in a cognitive relay network, which is in the environment of an optimal power allocation strategy. In this investigation, the main component in calculating the secondary throughput is the inclusion of the spatial false alarms, in addition to the conventional false alarms. It has been shown that there exists an optimal secondary power amplification factor at which the probability of SER has a minimum value, whereas the throughput has a maximum value. We performed a Monte-Carlo simulation to validate the analytical results.
A series of experiments have been carried out by using National Geographic Information Institute(NGII)'s Continuously Operating Reference Station (CORS) data with various strategies to analyze the impact of multi-GNSS measurements on baseline processing. The results of baseline processing were compared in terms of ambiguity fixing rate, precision, and hypothesis tests were conducted to confirm the statistical difference. The combination of multi-GNSS measurements has helped to improve ambiguity fixing rate, especially under harsh positioning environments. Combination of GPS, Galileo, BeiDou could get better precision than that of GPS, GLONASS, Galileo, and adding QZSS made the baseline solution's vertical component more precisely. The hypothesis tests have statistically confirmed that the inclusion of the multi-GNSS in the baseline processing enables not only to reduce field observation time length but also to enhance the solution's precision. However, it is of interest to notice that results of the baseline solution are dependent upon the software used. Hence, comprehensive studies should be performed shortly to derive the best practice to select the appropriate software.
Metabolic syndrome (MetS) involves multi-factorial conditions linked to an elevated risk of type 2 diabetes mellitus and cardiovascular disease. Pre-metabolic syndrome (pre-MetS) possesses two MetS components but does not meet the MetS diagnostic criteria. Although cardiac autonomic derangements are evident in MetS, there is little information on their status in pre-MetS subjects. In this study, we sought to examine cardiac autonomic functions in pre-MetS and to determine which MetS component is more responsible for impaired cardiac autonomic functions. A total of 182 subjects were recruited and divided into healthy controls (n=89) and pre-MetS subjects (n=93) based on inclusion and exclusion criteria. We performed biochemical profiles on fasting blood samples to detect pre-MetS. Using standardized protocols, we evaluated anthropometric data, body composition, baroreflex sensitivity (BRS), heart rate variability (HRV), and autonomic function tests (AFTs). We further examined these parameters in pre-MetS subjects for each MetS component. Compared to healthy controls, we observed a significant cardiac autonomic dysfunction (CAD) through reduced BRS, lower overall HRV, and altered AFT parameters in pre-MetS subjects, accompanied by markedly varied anthropometric, clinical and biochemical parameters. Furthermore, all examined BRS, HRV, and AFT parameters exhibited an abnormal trend and significant correlation toward hyperglycemia. This study demonstrates CAD in pre-MetS subjects with reduced BRS, lower overall HRV, and altered AFT parameters. Hyperglycemia was considered an independent determinant of alterations in all the examined BRS, HRV, and AFT parameters. Thus, hyperglycemia may contribute to CAD in pre-MetS subjects before progressing to MetS.
The friction and wear between machine components directly influence the energy loss and failure in various machines. Therefore, there is always a demand for finding methods to reduce friction and wear. Of the possible methods, lubrication is a widely used method for reducing friction and wear. In the case of lubrication, it is important to analyze the tribological behavior in the boundary lubrication because most of friction and wear occurs in the boundary lubrication regime. Cast iron has been regarded as a good material for industrial applications due to the excellent mechanical properties and high productivity. Especially, nodular cast iron is a material that shows better mechanical properties and wear-resistance compared with cast iron due to inclusion of spheroidal graphite. In this work, we investigated the tribological characteristics of nodular cast iron with respect to different counter parts in boundary lubrication regime. Sliding tests were conducted with SUJ2, ZrO2, Si3N4 balls as counter parts using a pin-on-disk type tribotester. The results showed different friction and wear behaviors with different counter parts. The case of ZrO2 showed the lowest wear rate in specimen and no significant ball wear. In case of SUJ2, it showed similar wear rate with ZrO2 case in specimen and the highest friction coefficient. The case of Si3N4 showed the lowest friction coefficient, 33% lower than the case of SUJ2. It showed 16.9 times larger wear rate in specimen and 43% larger wear rate in ball compared to that of the SUJ2 case.
본 연구의 주제는 대체원료를 옥수수와 대두박을 대신해 첨가될 때의 원료가격들의 변화와 대체원료의 적정한 가격을 판단할 수 있는 방법을 제시하는 것이다. 옥수수과 대두박 그리고 대체원료의 가격 변화는 각각의 원료사료들의 영양소 함량과 가격 및 대체원료의 첨가량을 바탕으로 계산된다. 원료사료의 가격 변화 계산에 필요한 각 원료사료들의 대체가는 대체원료를 사용함으로써 새로 추가되거나 제외되는 영양소의 함량들을 %로 표현한 것을 의미한다. 본 계산에서 사료가격의 순변화는 질소보정 외관상 대사에너지(Nitrogen-corrected apparent metabolizable energy), 표준회장가소화(Standardized ileal digestible) 라이신(Lys), 메티오닌(Met), 트레오닌(Thr) 및 트립토판(Trp) 그리고 총 칼슘(Total Ca)과 가용인(Available P) 함량을 바탕으로 계산하였다. 계산 결과, 옥수수주정박 단위무게당 새로 첨가되거나 제외되는 원료사료들의 함량에 대한 방정식은 다음과 같다: 1 ${\times}$ 옥수수주정박 + 0.0334 ${\times}$ 대두유 + 0.0182 ${\times}$ 석회석 = 0.8893 ${\times}$ 옥수수 + 0.13 ${\times}$ 대두박 + 0.0004 ${\times}$ 라이신 + 0.0022 ${\times}$ 메티오닌 + 0.0005 ${\times}$ 트립토판 + 0.0028 ${\times}$ 트레오닌 + 0.0264 ${\times}$ 제2인산칼슘 위 식과 원료사료들의 가격을 이용하여 옥수수주정박을 각 원료사료의 에너지와 영양소함량을 고려하여 15% 정도 옥수수와 대두박을 대체시 옥수수주정박의 가격은 270원/kg으로 계산되었다. 결론적으로 본 연구에서 이용한 엑셀기반 계산 프로그램은 육계 사료에서 대체원료의 경제적 가치를 판단할 때에 도움이 될 수 있을 것으로 사료된다.
The present study was conducted to examine the feasibility of utilising bamboo (Bambusa arundinacea) shoot shell (BSS) in ruminants. Chemical composition, rumen degradability and some antinutritional compounds were determined for fresh and boiled BSSs to evaluate its feed value and safety. Thirty-two Holstein heifers were allocated to four groups and used to investigate the response in growth rate to supplementing ammoniated rice straw with fresh shell (phase 1) or silage of boiled BSS (phase 2). All animals were offered ammoniated straw ad libitum with 1kg of cotton seed meal (phase 1) or 0.5 kg of cotton seed meal and 0.5 kg of concentrate mixture (phase 2) per head per day. The BSS was supplemented at levels of 0, 3, 6 or 9 kg/d (phase 1) and 0, 5, 10 or 15 kg/d (phase 2) (as fed basis). The BSS was very high in moisture content, and its contents of crude protein and neutral detergent fiber were 13~16% DM and 65~76% DM, respectively; boiling resulting in higher moisture and protein. No hydrocyanic acid was detected in both BSSs and content of tannins was negligible. Rumen degradability of BSS was reasonably high, and with boiling the rapidly degradable fraction decreased, and potentially degradable component increased. Silage of the boiled BSS was slightly lower in both rapidly and slowly degraded fractions than the fresh BSS. Animals consumed all supplemented BSSs without any adverse health problems. Intake of ammoniated straw decreased with the increasing levels of BSS, but total intake was higher in almost all supplementary groups than in the non-BSS. Heifers had a higher growth rate in phase 1 with fresh BSS than in phase 2 with ensiled shell, and daily weight gains were 622, 629, 744 or 690 g in phase 1, and 578, 575, 677 or 635 g in phase 2 at four BSS levels, respectively. For both phases growth rate was significantly higher for the animals in groups 3 and 4 than those in groups 1 and 2 (p<0.01), with little difference between groups 1 and 2 (p>0.05) but significant difference between groups 3 and 4 (p<0.05). Supplementation with BSS also resulted in an improved feed conversion rate, with the least concentrate consumption in group 3 for both phases. It is concluded that the BSS has a high potential nutritional value as indicated by its medium protein content, reasonably high rumen degradability, and that inclusion of BSS in ammoniated rice straw diet is not only safe to animals, but also may improve growth rate of ruminants and feed conversion rate. It may be disadvantageous to use high amounts of BSS in ammoniated straw diets.
Zahar, M. Wan;Hassan, O. Abu;Wong, H.K.;Liang, J.B.
Asian-Australasian Journal of Animal Sciences
/
제16권4호
/
pp.625-634
/
2003
Oil palm fronds (OPF) are one of the main by-products of the oil palm industry in Malaysia. It contains about 38.5 % crude fibre with ME values of about 5.65 MJ/kg dry matter. OPF has great potential to be utilized as a roughage source or as a component in a complete feed for ruminant animals. This paper briefly reviews the availability of OPF in Malaysia and its importance in the local beef and dairy industry. About 26 million metric tonnes of OPF are produced on dry matter basis annually during pruning and replanting operations in the plantations. The nutritive value of OPF and studies to improve its feeding value is highlighted. The optimum level of inclusion for ruminant feeding is 30 % and improvement to intake and digestibility can be further enhanced with addition of other oil-palm by-products. Performances of beef and dairy cattle fed fresh OPF or as silage, pellets and cubes are shown. Good quality OPF silage can be produced without using any additive and the significant improvement on the rate of growth and milk yield were shown. With good formulations, OPF based diets can allow live weight gains of between 600-850 g/day and for local crossbred dairy animals, milk yield of about 11.1 to 20.3 liter/day can be obtained. Pellet based on ground OPF seemed to be less well utilized for ruminant feeding due to its smaller particle size. OPF based cubes which have longer particle size is more suitable for beef and dairy cattle. Long-term feeding of OPF based feeds have been shown to produce good quality carcasses, and the meat is safe for consumption.
한국 소비자물가지수에서 전세지수는 단일 품목으로 최대 가중치(5.4%)를 차지하고 있으며, 전세가격 자체의 변화는 그대로 주거비 변화로 반영되고 있다. 전세는 주거서비스 비용을 자본화한 가격으로 일차적으로 월세 변화에 연동되지만, 실질적 비용인 월세와 무관하게 금리 변동에 의해서도 영향을 받는다. 따라서 전세가격을 그대로 소비자물가지수에 반영하면, 주거서비스 가격 변화 이외의 부분에 대해서도 비용 변화로 인식될 수 있다. 소비자물가지수 전세지수와 월세지수의 장기시계열을 살펴본 결과, 전세지수는 연평균 2.3% 상승하고 있으나 월세지수는 0.9% 상승하고 있어 추세적인 격차가 나타났다. 우리 경제의 금리가 서서히 하락하면서 자본화된 전세지수가 월세지수보다 더 빠르게 상승한 것으로 판단된다. 주거서비스 비용 변화를 반영할 수 있도록 전세지수의 대체 변수를 사용하여 소비자물가지수를 작성한 결과, 전반적으로 새로운 CPI는 기존의 CPI보다 물가상승률이 낮게 추정되었으며, 자가주거비를 포함하면 이러한 효과가 두드러지게 확대되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.