• KIEE International Transactions on Power Engineering
• /
• v.3A no.3
• /
• pp.139-147
• /
• 2003

The paper presents a novel approach of constructing the state matrix of the multi-machine power system for SSR (subsynchronous resonance) analysis using the linearized equations of individual devices including electrical transmission network dynamics. The machine models in the local d-q reference frame are integrated with the network models in the common R-I reference frame by simply transforming their output equations into the R-I frame where the transformed output is used as the input to the network dynamics or vice versa. The salient feature of the formulation is that it allows for modular construction of various component models without rearranging the overall state space formulation. This universal SSR small signal stability program provides a flexible tool for systematic analyses of SSR small-signal stability impacts of both conventional devices such as generation systems and novel devices such as power electronic apparatus and their controllers. The paper also presents its application results to IEEE benchmark models.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.177.1-177.1
• /
• 2010

Large offshore wind farms have actively been developed in order to meet the needs for wind energy since the land-based wind farms have almost been fully developed especially in Europe. The key problem for the construction of offshore wind farms may be on the high cost of energy compared to land-based ones. NREL (National Renewable Energy Laboratory) has developed a spreadsheet-based tool to estimate the cost of wind-generated electricity from both land-based and offshore wind turbines. Component formulas for various kinds and scales of wind turbines were made using available field data. Annual energy production has been estimated based on the Weibull probability distributions of wind. In this paper, this NREL estimation model is introduced and applied to the offshore wind turbines now under designing or in production in Korea, and the result is discussed.

• New & Renewable Energy
• /
• v.8 no.4
• /
• pp.3-12
• /
• 2012

Large offshore wind farms have actively been developed in order to meet the needs for wind energy since the land-based wind farms have almost been fully developed especially in Europe. The key problem for the construction of offshore wind farms may be on the high cost of energy compared to land-based ones. NREL (National Renewable Energy Laboratory) has developed a spreadsheet-based tool to estimate the cost of wind-generated electricity from both land-based and offshore wind turbines. Component formulas for various kinds and scales of wind turbines were made using available field data. In this paper, this NREL estimation model is introduced and applied to the offshore wind turbines now under designing or in production in Korea, and the result is discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.25-30
• /
• 2018

Pattern classification system is often an important component of intelligent systems. In this paper, we present a pattern classification system consisted of the feature selection module, knowledge base construction module and decision module. We introduce a feature impact evaluation selection method based on fuzzy cluster analysis considering computational approach and generalization capability of given data characteristics. A fuzzy neural network, OFUN-NET based on unsupervised learning data mining technique produces knowledge base for representative clusters. 240 blemish pattern images are prepared and applied to the proposed system. Experimental results show the feasibility of the proposed classification system as an automating defect inspection tool.

• Journal of KIBIM
• /
• v.11 no.1
• /
• pp.21-30
• /
• 2021

Reinforcing bars, a major component of the pre-fab structure, adheres to the existing on-site assembly method and attempts to develop and commercialize the technology of the pre-assembly method, but the effect is insignificant. Welded Wire / Bar Mat (WBM) has various advantages such as commercialization of rebar through machine manufacturing to improve workability, but it is different from the existing design and the construction method is different from the previous one. Therefore, to maximize the advantages of WBM and improve productivity, manufacturing, transportation, and construction from the design stage should be considered based on BIM from the initial design stage. In this paper, the concept of the design support system for the WBM was established based on the use of BIM in concrete reinforcement and the preliminary research on the WBM. WBM conversion design was performed for the existing prefabricated members, and based on this, the exchange format and system of the master prefabricated model with the WBM design data were set up. As a result of the pilot test, it was found that the traditional reinforcing bar information extracted from the master prefab model has transmitted 100% accurately. As for the WBM information, 100% of the information on the straight reinforcement was transmitted and represented, and the information on the bent reinforcement was found to have a 90% recall in the master BIM tool.

• Journal of Korean Society on Water Environment
• /
• v.27 no.1
• /
• pp.61-72
• /
• 2011

In order to assess hydrologic and nonpoint source pollutant behaviors in a watershed with Soil and Water Assessment Tool (SWAT) model, the accuracy evaluation of SWAT model should be conducted prior to the application of it to a watershed. When calibrating and validating hydrological components of SWAT model, the Nash-Sutcliffe efficiency coefficient (EI) has been widely used. However, the EI value has been known as it is affected sensitively by big numbers among the range of numbers. In this study, a Web-based flow clustering EI estimation system using K-means clustering algorithm was developed and used for SWAT hydrology evaluation. Even though the EI of total streamflow was high, the EI values of hydrologic components (i.e., direct runoff and baseflow) were not high. Also when the EI values of flow group I and II (i.e., low and high value group) clustered from direct runoff and baseflow were computed, respectively, the EI values of them were much lower with negative EI values for some flow group comparison. The SWAT auto-calibration tool estimated values also showed negative EI values for most flow group I and II of direct runoff and baseflow although EI value of total streamflow was high. The result obtained in this study indicates that the SWAT hydrology component should be calibrated until all four positive EI values for each flow group of direct runoff and baseflow are obtained for better accuracy both in direct runoff and baseflow.

• Journal for History of Mathematics
• /
• v.31 no.2
• /
• pp.73-91
• /
• 2018

This study begins with the awareness of problem that the education of mathematics teachers has failed to link the limit and the infinite set conceptually. Thus, this study analyzes the historical and reciprocal development of the limit and the infinite set, and discusses how to improve the education of these concepts and their relation based on the outcome of this analysis. The results of the study confirm that the infinite set is the historical tool of linking the limit and the real numbers. Also, the result shows that the premise of 'the component of the straight line is a point.' had the fundamental role in the construction of the real numbers as an arithmetical continuum and that the moral certainty of this premise would be obtained through a thought experiment using an infinite set. Based on these findings, several proposals have been made regarding the teacher education of awakening someone to the fact that 'the theoretical foundation of the limit is the real numbers, and it is required to introduce an infinite set for dealing with the real numbers.' in this study. In particular, by presenting one method of constructing the real numbers as an arithmetical continuum based on a thought experiment about the component of the straight line, this study opens up the possibility of an education that could get the limit values psychologically connected to the infinite set in overcoming the epistemological obstacle related to the continuum concept.

• The Journal of Korean Association of Computer Education
• /
• v.7 no.5
• /
• pp.33-43
• /
• 2004

Fashion design education essentially requires not only a theoretical but also a practical process in which feedback comes through personal interactions between an instructor and a student. But the existing WBI system exemplifies its limitations by applying only a one-way Distance Education methodology that limit interactions based only on the theoretical texts. This study affirms that distance learning system is possible for the applied component of the fashion design curriculum as long as the specific needs of the particular program is taken into consideration and systematically applied. So it designed and applied an original web-based distance educational system specifically incorporating the needs of the fashion design curriculum Thus the results show that the enhanced distance education system is a tool that could be effectively utilized with the same degree of success as the traditional classroom as long as the traditional teaching component of direct interaction necessary to the fashion design program is incorporated.

• Structural Engineering and Mechanics
• /
• v.73 no.6
• /
• pp.641-649
• /
• 2020

The determination of midtower longitudinal stiffness has become an essential component in the preliminary design of multi-tower suspension bridges. For a specific multi-tower suspension bridge, the midtower longitudinal stiffness must be controlled within a certain range to meet the requirements of sliding resistance coefficient and deflection-to-span ratio. This study presents a numerical method to divide different types of midtower and determine rational range of longitudinal stiffness for rigid midtower. In this method, influence curves of midtower longitudinal stiffness on sliding resistance coefficient and maximum vertical deflection-to-span ratio are first obtained from the finite element analysis. Then, different types of midtower are divided based on the regression analysis of influence curves. Finally, rational range for longitudinal stiffness of rigid midtower is derived. The Oujiang River North Estuary Bridge which is a three-tower four-span suspension bridge with two main spans of 800m under construction in China is selected as the subject of this study. This will be the first three-tower four-span suspension bridge with steel truss girders and concrete midtower in the world. The proposed method provides an effective and feasible tool for engineers to design midtower of multi-tower suspension bridges.

• Journal of Welding and Joining
• /
• v.34 no.5
• /
• pp.41-46
• /
• 2016

Welding is an absolutely essential component of industries such as the automotive industry, the construction industry and even the aviation industry. Although it is a widespread technology it is still characterized by lots of uncertainties. This still requires well experienced and highly skilled workforce to design and perform safe welding processes. The early knowledge of distortion and residual stresses is almost an issue which is influenced mainly by the welding parameters and the fixture design. But more and more engineers want to know as well final properties of the assembled components. With the beginning of the computer age in the 1970s and 1980s last century, the numerical prediction of manufacturing processes using FEM was gradually getting better and has established itself in the industry since the 1990s as a standard tool. Unlike in metal casting and forming industry, however, the everyday use of FEM- simulation tools for welding processes eked out a shadowy existence for a long time. This paper will give a short classification of welding simulation types and a structured overview on the technical questions. Selected case studies and the benefits achieved through simulations with the software Simufact welding are discussed. Finally an outlook on future developments will be given.