• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.140-143
• /
• 2004

Heat of hydration of concrete under different curing temperatures can be characterized with knowledge of the thermal activity, the heat rate at the reference temperature, and the total heat of hydration of the mixture. The so-called multi-component hydration model incorporates the effect of following variables: cement chemical composition, cement fineness, secondary cementitious powders, mixture proportions, and concrete properties. However, the model does not consider the use of silica fume as a secondary cementitious powder. Therefore, the model that quantifies the heat of hydration due to the use of silica fume is needed. In this thesis, the effects of silica fume on heat of hydration are evaluated and the influence on the heat of hydration are also quantified to be included in the model, so that the analysis using modified multi-component hydration model for silica fume concrete provides more accurate results than normal concrete.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.93-96
• /
• 2000

In this study, we investigated the electromagnetic properties of Mn-Zn ferrite doped with rare earth oxide (Dy$_2$O$_3$, Er$_2$O$_3$). The main composition is 52mo1% $\alpha$-Fe$_2$O$_3$, 25mo1% Mn$_3$O$_4$23mo1% ZnO and doped with them(0.05wt%~0.25wt%, step:0.05wt%). An experimental process has advanced by conventional ferrimagnetism manufacturing that was prepared by standard ceramic techniques. The XRD pattern of all doped sample were observed spinel and secondary phase. The density of sample were measured nearly constant value. As increased the additive, resistivity, initial permeability and real component of the series complex permeability increased with setting limits each other. In case of Mn-Zn ferrite excess doped with them, resistivity, initial permeability and real component of the series complex permeability decreased and magnetic loss increased in proportion to increasing the additive.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.1
• /
• pp.83-89
• /
• 1996

Multivariate statistical procedures were used to analyse data on the chemical composition and in vitro digestibility of four varienties of rice straw after treatment with 4% NaOH solution, 4% urea solution or distilled water (control) for 48 hours. For each treatment, stepwise discriminant analysis identified the variables which maximized differences between varieties and the eigenvectors from principal component analysis quantified the contribution of these criterion variables to varietal differences. The overall response of varieties to chemical treatment was demonstrated qualitatively, by cluster analysis, and quantitatively, from the magnitude of the principal component scores. The analysis revealed that the urea and control treatments elicited the same response whereas NaOH had the greatest effect on the poorest straw variety. Similar analyses conducted on the botanical fractions of the varieties showed that the relative response of the inflorescence, stem, leaf blade and leaf sheath fractions was not altered by chemical treatment.

• Journal of the Korean Ceramic Society
• /
• v.27 no.3
• /
• pp.430-436
• /
• 1990

Glasses of different compositions were synthesized by substituting each component of 56ZrF4-14BaF2-6LaF3-4AlF3-20NaF(ZBLAN) with HfH4, SrF2, GdF3, InF3 and LiF3, each of similar size and chemical property with the component being substituted, respectively. The heating rate used in the DSC runs was 10K/min. All ofthe glasses exhibit glass transition temperatures of 510$\pm$10K, while crystallization temperatures vary between 625 and 720K depending upon different glass compositions. For most glasses crystallization temperatures obtained while cooled are lower than those obtained while heated, but InF3 or SrF2 containing glasses showed opposite trend. HBLAN, ZHBLAN and ZHBLANLi glasses, which were made by substituting HfH4, LiF for ZrF4 and NaF of ZBLAN respectively, showed improvement in the glass stability.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.171-179
• /
• 2010

A fundamental technology of UGV(Unmanned Ground Vehicle) to perform a given mission with success in various environment is a path planning method which generates a safe and optimal path to the goal. In this paper, we suggest a local path-planning method of UGV based on the binary map using world model data which is gathered from terrain perception sensors. In specially, we present three core algorithms such as shortest path computation algorithm, path optimization algorithm and path smoothing algorithm those are used in the each composition module of LPP component. A simulation is conducted with M&S(Modeling & Simulation) system in order to verify the performance of each core algorithm and the performance of LPP component with scenarios.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.204-211
• /
• 2016

Oil pollution seriously endangers the biological environment and human health. Due to the diversity of oils and the complexity of oil composition, it is of great significance to identify the oil contaminants. The 3-D fluorescence spectrum combined with a second order correction algorithm was adopted to measure an oil mixture with overlapped fluorescence spectra. The self-weighted alternating trilinear decomposition (SWATLD) is a kind of second order correction, which has developed rapidly in recent years. Micellar solutions of #0 diesel, #93 gasoline and ordinary kerosene in different concentrations were made up. The 3-D fluorescence spectra of the mixed oil solutions were measured by a FLS920 fluorescence spectrometer. The SWATLD algorithm was applied to decompose the spectrum data. The predict concentration and recovery rate obtained by the experiment show that the SWATLD algorithm has advantages of insensitivity to component number and high resolution for mixed oils.

• Applied Science and Convergence Technology
• /
• v.23 no.6
• /
• pp.328-339
• /
• 2014

In this article, plasma monitoring tools and mulivariate analysis techniques were reviewed. Optical emission spectroscopy was reviewed for a chemical composition analysis tool and RF V-I probe for a physical analysis tool for plasma monitoring. Multivariate analysis techniques are discussed to the sensitivity improvement. Principal component analysis (PCA) is one of the widely adopted multivariate analysis techniques and its application to end-point detection of plasma etching process is discussed.

• Annual Conference of KIPS
• /
• 2005.11a
• /
• pp.369-372
• /
• 2005

최근 소프트웨어의 수요가 증가함에 따라 수요를 충족시키기 위한 다양한 응용 소프트웨어 개발 방식 중 컴포넌트 기반 소프트웨어 개발(CBSD: Component-Based Software Development) 기술이 빠르게 발전하였고, 이에 실제 개발된 컴포넌트의 합성을 통한 커다란 응용 소프트웨어 개발이 활발히 진행되고 있다. 또한 컴포넌트들이 서로 정확하게 합성되고, 작동할 수 있는 방법으로 소프트웨어 아키텍쳐 기반의 합성 환경에 대한 연구들이 진행되고 많은 방법들이 제안되었다[1]. 이에 본 논문에서는 지금껏 제안된 아키텍쳐 모델들이 갖고 있는 소프트웨어 개발에 있어 전체적인 흐름파악의 어려움과 변경의 파급효과라는 문제점들을 해결 및 최소화 시킬 수 있는 방법으로 제안된 워크플로우라는 개념을 사용한 소프트웨어 아키텍쳐 모델에 대한 추가 연구와 더불어 아키텍쳐의 명세를 XML로 정의하므로, 명세 구문의 수정 및 확장이 용이하도록 하였다.

• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.248-255
• /
• 2002

The contents of ${\alpha}$-, ${\beta}$-, ${\gamma}$-, and $\delta$-tocopherols in sesame oils were determined by high performance liquid chromatography with UV detection. ${\alpha}$-Tocopherol contents ranged from 10.28 to 19.79 mg/g oil, ${\beta}$-tocopherol contents from 8.22 to 20.10 mg/g. However, both ${\gamma}$- and $\delta$-tocopherol were less than 1.49 mg/g or not detected. ${\gamma}$-Tocopherol was not detected from both unroasted white and black sesame seed oils. Significantly higher level of tocopherol in sesame oil than other oils is an evidence of the reason why it is highly stable and prevents oxidation. The tocopherol composition for twenty sesame oils was classified by using principal component analysis.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.58-62
• /
• 1992

The objective of this study is to investigate the generation rates, composition, propertion and lower heating values of each material in the municipal solid wastes(MSW) as well as the effect of landfill leachate on the environment in Taejon. The results are as follows: 1. The annual average generation rate of MSW in Taejon is approximately 1.7kg/c.d. 2. The weight percent of combustible matters is on average 80 and the lower heating value of MSW is measured to be more than 1,700 kcal/kg after removing the briquette component. 3. It is necessary for us to take a proper management system for leachate treatment in the landfill because it has many problems in the sewage and groundwater. 4. It is recommeded that MSW be treated by multiple methods such as the sanitary landfill, resources and recovery, composting and incineration.