• Structural Engineering and Mechanics
• /
• 제82권4호
• /
• pp.503-515
• /
• 2022

The multi-rigid-body matrix method (MRBMM) is a generalized modeling method for obtaining the displacements, forces, and dynamic characteristics of a compliant mechanism without performing inner-force analysis. The method discretizes a compliant mechanism of any type into flexure hinges and rigid bodies by implementing a multi-body mass-spring model using coordinate transformations in a matrix form. However, in this method, the deformations of bodies that are assumed to be rigid are inherently omitted. Consequently, it may yield erroneous results in certain mechanisms. In this paper, we present a multi-compliant-body matrix-method (MCBMM) that considers a rigid body as a compliant element, while retaining the generalized framework of the MRBMM. In the MCBMM, a rigid body in the MRBMM is segmented into a certain number of body nodes and flexure hinges. The proposed method was verified using two examples: the first (an XY positioning stage) demonstrated that the MCBMM outperforms the MRBMM in estimating the static deformation and dynamic mode. In the second example (a bridge-type displacement amplification mechanism), the MCBMM estimated the displacement amplification ratio more accurately than several previously proposed modeling methods.

• 소음진동
• /
• 제9권6호
• /
• pp.1259-1266
• /
• 1999

본 연구의 목적은 유연성 궤도 모델을 개발하여 고기동성 궤도차량의 다물체 동역학 해석에 응용하는 것이다. 유연성 궤도 모델을 개발하는데는 대체로 두 가지 어려운 문제가 따른다. 첫째로, 해의 안정성을 유지하기 위해 적분구간이 충분히 작아야 한다는 것이다. 즉, 궤도 링크 사이의 유연성 조인트 모델과 충격적인 접촉력에 따른 고진동 입력을 처리해야 한다. 둘째로, 3차원 다물체 궤도차량 모델에 대한 수 많은 운동 방정식을 풀어야 한다는 것이다. 따라서 궤도차량을 샤시와 궤도 부시스템으로 나누고 회귀적인 방법을 사용하여 운동방정식의 수를 최소화하였다. 본 연구에서 개발된 방법을 검증하기 위하여 차량의 가속, 고속주행, 제동, 선회 등의 시뮬레이션을 수행하였다.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.112-120
• /
• 2003

In this paper, dynamic track tension fur high mobility tracked vehicle is investigated by multibody dynamic simulation techniques. This research focuses on a heavy military tracked vehicle which has sophisticated suspension and rubber bushed rack systems. In order to obtain accurate dynamic track tension of track subsystems, each track link is modeled as a body which has six degrees of freedom. A compliant bushing element is used to connect track links. Various virtual proving ground models are developed to observe dynamic changes of the track tension. Numerical studies of the dynamic track tension are validated against the experimental measurements. The effects of pre-tensions, traction forces, fuming resistances, sprocket torques, ground profiles, and vehicle speeds, for dynamic responses of track tensions are explored, respectively.

• 동력기계공학회지
• /
• 제15권1호
• /
• pp.64-71
• /
• 2011

The Tension Leg Platform(TLP) is restrained from oscillating vertically by tethers(or tendons), which are vertical anchor lines tensioned by the platform buoyancy larger than the platform weight. Thus a TLP is a compliant structure which allows lateral movements of surge, sway, and yaw but restrains heave, pitch, roll. In this paper, the motions of a TLP in current and waves were investigated. Hydrodynamic forces and wave exciting forces acting on the TLP were evaluated using the three dimensional source distribution method. The motion responses and tension variations of the TLP were analyzed in the case of including current or not including one in regular waves and effects of current on the TLP were investigated.