• 대한핵의학회:학술대회논문집
• /
• 1999.05a
• /
• pp.200-204
• /
• 1999

Rheumatoid arthritis (RA) is o chronic inflammatory disease of joints with proliferation of synovial epithelial tissue. Therapeutic approach of the RA consists of pharmacological and surgical interventions. Synovectomy is indicated in patients with progressive inflammatory signs and symptoms intractable to medical treatment including local intracavitary steroid injection. Recently, local injection of radionuclides which emit high energy beta rays are labeled with chemical compounds such as $^{90}Y,\;^{165}Dy-ferric$ hydroxide macroaggregate and have been introduced as an alternative therapeutic modality to surgical synovectomy. Holmium-166 is one of beta emitter and Ho-166-chitosan complex was developed for radiation synovectomy. Preclinical trial is on-going at our hospital using Ho-166-chitosan. The procedure and methods of preclinical trial are discussed.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.708-714
• /
• 2001

Although LP gas has lots of advantages, there has been limitation in application for automotive engine due to the several disadvantages, such as power decrease, complex fuel supply unit, and back fire etc. However LP gas direct injection engine has possibility to solve the problems above mentioned. LEM(Light Extinction Method) was employed for analysis of spacial and temporal distribution of LP gas which is directly injected into combustion chamber under various pressure and temperature conditions. The results from CVC(Constant Volume Chamber) were compared to those of RICEM(Rapid Induction, Compression and Expansion Machine) which simulate early- and late injection of direct injection engine. LPG fuel spray is affected by temperature and pressure in evaporation characteristics but it is more benefit to direct injection engine in every way such as, fuel distribution, evaporating speed and well wetting reduction.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.1
• /
• pp.143-154
• /
• 1995

This study investigates the response characteristics of a four-cylinder four-stroke turbocharged diesel engine by using computer simulation and experiments when a rapid acceleration is applied to the fuelpump rack. In the theoretical analysis, linearization method is used to avoid the difficulty on the complex nonlinear functions. Comppressor exit pressure, pressure and temperature of turbine inlet, and turbocharger speed are chosen as the independent variables of transfer functions which represent the dynamic characteristics of the turbocharger system, and expressed as the functions with respect to the time. Experiments on the same eigine system are also carried out to prove the validity of theoretical study. Further, this study carried an experiment for improving transient response performance by injecting air into the inlet manifold under the rapid accelerating conditions. The effects of air injection on the response performances are also represented at varying conditions such as injection pressure, injection period, accelerating rate, accelerating time, engine speed and load.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.614-619
• /
• 2007

The importance of simulation of plastic flow in the injection mold is increasing as the parts are more complex, but the small-scale enterprises can't afford to invest for the infra individually. CAE (Computer Aided Engineering) service was naturally born based on these needs. This paper presents the engineering collaboration model between the large and the small/medium enterprises in the field of injection molds. Based on the engineering collaboration hub and CAE service, small-scale enterprises could research the necessary technology and develop the proper products. The analysis results of CAE are provided by the integrated visualization system on the web. This paper also deals with the delivery shorting process of CAE service for electric/electronic parts which should meet the needs of customers as soon as possible.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.492-495
• /
• 2008

Efficient top-emitting organic light-emitting diodes were fabricated using copper iodide (CuI) doped NPB as a p-doped hole injection layer to improve hole injection from a silver bottom electrode. The enhanced hole injection is originated from the formation of the charge transfer complex between CuI and NPB. The devices result in high efficiency of 69 cd/A with almost Lambertian emission pattern.

• Clinics in Shoulder and Elbow
• /
• v.6 no.2
• /
• pp.108-114
• /
• 2003

The shoulder is a complex area which makes it vulnerable to painful pathologic processes. Chronic shoulder pain has become more common recently due to increased use of computers and a ,generally more sedentary life style among most people . Trigger point injection and neural blockade are useful for the management of chronic shoulder pain which has not improved with conservative treatment. Published articles concerning trigger point injection or neural blockade for chronic shoulder pain were reviewed to evaluate promising methods. If we are careful to remain aware of the details and complications in addition to adhering to effective treatments, these should be good armamentarium for doctors enthusiastic about the management of chronic shoulder pain.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.59-64
• /
• 2007

Non-contact transportation of a large-sized glass plate using air cushion for the vertical sputtering system of liquid crystal display (LCD) panel was considered. The objective of the study was to design an air pad unit which was composed of multiple injection and exhaust holes and mass flow supplying pipe. The gas was injected through multiple small holes to maintain the force for levitating glass plate. After hitting the plate, the air was vented through exhaust holes. Complex flow field and resulting pressure distribution on the glass surface were numerically studied to design the air injection pad. The exhaust hole size was varied to obtain evenly distributed pressure distribution at fixed diameter of the injection hole. Considering the force for levitating glass plate, the diameter of the exhaust hole of 30 to 40 times of the gas injection hole was recommended.

• Transactions of Materials Processing
• /
• v.12 no.6
• /
• pp.521-528
• /
• 2003

Powder injection molding (PIM) uses the shaping advantage of injection molding but is applicable to metals and ceramics. This process combines a small quantity of polymer with an inorganic powder to form a feedstock that can be molded. After shaping, the polymeric binder is extracted and the powder is sintered, often to near-theoretical densities. According1y, PIM delivers structural materials in a shaping technology previously restricted to polymers. The process overcomes the shape limitations of traditional powder compaction, the costs of machining, the productivity limits of isostatic pressing and slip casting, and the defect and tolerance limitations of conventional casting. Since 1980s when major attention was given to PIM process, it has been widening the application area from small parts with complex shape and tailored properties to structural parts requiring strength and ductility as in automotive, military and medical industries.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.227-228
• /
• 2006

Powder injection molding (PIM) is a suitable technology for the fabrication of complex shape titanium and its alloys, and has a great potential in many applications. This paper dealt with the injection molding of hydride dehydrogenization (HDH) titanium powder, spheroidized HDH titanium powder and gas atomized titanium powder. Rheological and thermalgravimetric behaviors were compared between the feedstocks of the three powders, and a tentative application of Ti PIM to eye frame temple and bridge was briefed.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.497-498
• /
• 2006

Powder Injection Molding (PIM) has recently been recognized as an advanced manufacturing technology for low-cost mass production of metal or ceramic parts of complicated geometry. With this regards, design technology of dental scaler tip PIM mold, which has complex shape, with the help of computer-aided analysis for powder injection molding process was developed. Compter aided analysis results, such as filling pattern, weldline formation, and air vent position prediction were investigated and eventually showed good agreements with experimental results.