• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.402-410
• /
• 2000

As the combustion process of CWM consists of the water evaporation, the release and combustion of volatile matter, and the combustion of char for every particle, it is more complex than that of existent liquid fuel. Though the many studies on CWM combustion have been carried out by the single droplet using hanging methods or the multiple droplet using atomization methods, any report don't presents definite solution about the effects by the initial water evaporation and combustion of volatile. When CWM is suddenly exposed in the high temperature surroundings, the internal water evaporates and then each droplet builds up pores. Besides, porosity rate changes along the temperature of surroundings, the composition ratio of CWM, and the initial diameter of droplet. In result, because it affects the whole combustion rate, the combustion of CWM has complex mechanism as compared with the combustion of liquid or gas fuel. Therefore, concentrating on porous structure of CWM, this study has proceeded to acquire the basic data on the CWM injection combustion and closely examines the effects of the first stage combustion on the whole combustion by measuring the diameter variations, pore rate, mass fraction burned, and the internal temperature changes of CWM droplet. The results demonstrate that $60{\sim}70%$ of initial mass is reduced during water evaporation and volatile combustion period, and swelling rate, mass faction burned, and density variation are greatly concerned with atomization of CWM etc.

• Journal of Korean Neurosurgical Society
• /
• 제53권5호
• /
• pp.274-280
• /
• 2013

Objective : To evaluate the feasibility and clinical and angiographic outcomes of stent-assisted embolization for complex middle cerebral artery (MCA) aneurysms. Methods : The records of 23 consecutive patients with 24 MCA aneurysms, who underwent stent-assisted embolization of the aneurysm, were retrospectively evaluated. Results : Fifteen aneurysms were treated with one stent and 8 were treated using more than two stents (5 a stent-within-a-stent, 1 triple stents, and two Y-stent). Angiographically, complete or near complete occlusion was achieved in 15 aneurysms (65.2%), residual neck in five (21.7%), and residual aneurysm in three (13.1%). Five aneurysms demonstrated thrombosis within the stent during the procedure and hospitalization, and were resolved by intraarterial and intravenous Tirofiban injection. Symptomatic thromboembolic complications were developed in five patients and permanent deficits demonstrated in two patients with modified Rankin Scale 1 and 2, respectively. Treatment-related permanent morbidity and mortality rates were 8.3% and 0% with relatively high complication rate. Angiographic follow-up was available in 17 aneurysms at 6-31 months (mean, 13.2 months) and showed stable or improved in 15 (88.2%) and major and minor recurrence in one, respectively. Conclusion : Complex MCA aneurysms could be treated by stent-assisted coiling and showed lower recanalization rate during mid-term follow-up by effective flow diversion due to various stent-assisted techniques. Our results warrant further study with a longer follow-up period in a larger sample.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.188-191
• /
• 2008

There have been many methods for producing natural gas from gas hydrate reservoirs in permafrost and sea floor sediments. It is well knownthat the depressurization should be a best option for Class 1 gas hydrate deposit, which is composed of tow layers: hydrate bearing layer and an underlying free gas. However many of gas hydrate reservoirs in sea floor sediments are classified as Class 2 that is composed of gas hydrate layer and mobile water, and Class 3 that is a single gas hydrate layer. The most appropriate production methods among the present methods such as thermal stimulation, inhibitor injection, and controlled oxidation are still under development with considering the gas hydrate reservoir characteristics. In East Sea of Korea, it is presumed that the thick fractured shale deposits could be Class 2 or 3, which is similar to the gas hydrate discovered offshore India. Therefore it is needed to evaluate the possible production methods for economic production of natural gas from gas hydrate reservoir. Here we would like to present the production of natural gas from gas hydrate deposit in East Sea with industrial flue gases from steel company, refineries, and other sources. The existing industrial complex in Gyeongbuk province is not far from gas hydrate reservoir of East Sea, thus the carbon dioxide in flue gas could be used to replace methane in gas hydrate. This approach is attractive due to the suggestion of natural gas productionby use of industrial flue gas, which contribute to the reduction of carbon dioxide emission in industrial complex. As a feasibility study, we did the NMR experiments to study the replacement reaction of carbon dioxide with methane in gas hydrate cages. The in-situ NMR measurement suggeststhat 42% of methane in hydrate cages have been replaced by carbon dioxide and nitrogen in preliminary test. Further studies are presented to evaluate the replacement ratio of methane hydrate at corresponding flue gas concentration.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1765-1772
• /
• 2006

High-pressure die casting such as thixocasting and rheocasting is an effective process in the manufacturing automotive parts. Following the recent trend in the automotive manufacturing technologies, the product design subject to the die casting becomes more and more complex. Simultaneously the injection speed is also designed to be very high to establish a short cycletime. Thus, the requirement of the die design becomes more demanding than ever before. In some cases the product's shape can have multiple slender manifolds. In such cases, design of the inlet and outlet parts of the die is very important in the whole manufacturing process. The main issues required for the qualified products are to attain gentle and uniform flow of the molten liquid within the passages of the die. To satisfy such issues, the inlet cylinder ('bed cylinder' in this paper) must be as large as possible and simultaneously the outlet opening at the end of each passage must be as small as possible. However these in turn obviously bring additional manufacturing costs caused by re-melting of the bed cylinder and increased power due to the small outlet-openings. The purpose of this paper is to develop effective simulation methods of calculation for fluid flows in multiple columns, which mimic the actual complex design, and to get some useful information which can give some contributions to the die-casting industry. We have used a commercial code CFX in the numerical simulation. The primary parameter involved is the size of the bed cylinder. We will show how the very small opening of the outlet can be treated with the aid of the porous model provided in the code. To check the validity of the numerical results we have also conducted a simple experiment by using water.

• 방사선산업학회지
• /
• 제5권3호
• /
• pp.197-202
• /
• 2011

In this study, an Ag-polyaniline-silica (Ag-PANI-silica) nanoparticle was evaluated as a radioisotope carrier. An Ag-PANI-silica nanoparticle was incubated in the $^{125}I$ solution for a duration of 24 hr to test its radioisotope absorptivity. During the incubation, radioactivity of the nanoparticle was measured at 3, 6, 12, and 24 hr. After a 24 hr incubation, $^{125}I$-Ag-PANI-silica nanoparticle was incubated in a fresh saline for a duration of 48 hr to check its stability. Additionally, the $^{125}I$-Ag-PANI-silica nanoparticle was injected to the ICR mouse to investigate its in-vivo distribution characteristics. The $^{125}I$ absorption yield of the Ag-PANI-silica nanoparticle was higher than 95% after a 6 hr incubation period in the $^{125}I$ solution. And $^{125}I$-Ag-PANI-silica was stable for 48 hr at 80% yield at room temperature. The SPECT/CT image of a mouse that received $^{125}I$-Ag-PANI-silica complex showed that the $^{125}I$-Ag-PANI-silica complex was distributed in the lung, stomach and thyroid at 30 min post injection. From these results, the Ag-PANI-silica nanoparticle has good radio-iodine carrying property and can be applicable for the purpose of diagnosis and therapy.

• 한국수자원학회논문집
• /
• 제54권9호
• /
• pp.643-656
• /
• 2021

최근 국내 상수도 관리 기술은 고도로 발달하고 있으며, 이 과정에서 상수관망 내 용수공급 현황을 파악하고 예측하기 위한 컴퓨터 수리·수질 해석 모형은 핵심적인 역할을 수행하고 있다. 그러나 대규모 네트워크의 경우 컴퓨터 해석모형의 부담을 가중하고, 특히 짧은 계산시간 간격과 긴 모의 시간이 요구되는 수질해석의 경우, 막대한 계산시간이 소요되어 다양한 수질모의 및 분석이 어려운 경우가 발생한다. 본 연구에서는 대규모 상수관망시스템의 수질해석의 계산효율을 개선하기 위해 상수도 공급계통을 2단계로 계층화한 후, 계층화된 네트워크를 대상으로 수질모의를 수행하는 계층적 수질모의 기법을 제안하였다. 제안된 모의기법은 국내 대규모 상수도 네트워크에 적용하였으며, 다양한 염소투입농도 시나리오에 따른 잔류염소농도의 시공간적 분포를 모의하고 분석한 결과를 제시하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권7호
• /
• pp.2209-2224
• /
• 2022

The Internet of Things (IoT) is being used in a wide variety of fields due to the recent 4th industrial revolution. In particular, research is being conducted that combines IoT with the medical field such as telemedicine. Among them, the field of shock detection is a big issue in the medical field because the causes of shock are diverse, treatments are very complex, and require a high level of medical knowledge and experience. The transmission of infectious diseases is common when treating critically ill patients, especially patients with shock. Thus, to effectively care for shock patients, we propose an architecture that continuously monitors the patient's condition, and automatically recommends a drug injection treatment according to the patient's shock condition. The patient's hemodynamic information is continuously monitored, and the patient's shock generation information is recorded periodically. With the recorded patient information, the patient's condition is determined and automatically injected with necessary medication. The medical team can find out whether the patient's condition has improved by checking the recorded information through web applications. The study can help relieve the shortage of medical personnel and help prevent transmission of infectious disease in medical staff. We look forward to playing a role in helping medical staff by making recommendations for the diagnosis and treatment of complex and difficult shocks.

• 대한의생명과학회지
• /
• 제3권2호
• /
• pp.83-88
• /
• 1997

범발성 혈관내 응고증은 패혈증 환자들에 있어 빈번히 발생하며 여러 가지 위급한 질병 상태에 관계하는 병리학적 상황이다. 범발성 혈관내 응고증은 기존의 복잡한 임상 상황을 더욱 어렵게 만들어서 높은 사망률의 원인이 된다. 그럼에도 불구하고 그것의 병인적 기전들은 완전히 규명되지 않았다. 본 연구는 범발성 혈관내 응고증의 발생에 관여하는 병인적 기전들의 이해를 위해 전향적으로 계획되었다. 15마리의 쥐를 대상으로 해서 연구목적에 따라 세 군으로 나누었다：I 군은 대조군으로서 내독소를 투여하지 않은 쥐들이고 (n=5), II 군은 내독소 투여 후 12시간이 경과한 쥐들이며 (n=5), III군은 내독소 투여 후 24시간이 경과한 쥐들이었다 (n=5). 실험적 범발성 혈관내 응고증은 일정량의 내 독소를 한번에 투여하여 유도하였다 (1mg/kg, E. coli serotype 055:B5). 실험대상 쥐들의 심장으로부터 직접 채혈하여 혈소판수, 섬유소원 농도, plasminogen 농도, 항트롬빈 III 농도, D-dimer, 보체성분 (C3 및 C4)을 측정하였다. 내독소를 투여한 II 군과 III 군에 있어 혈소판수, 섬유소원 (III 군의 경우는 오히려 증가), plasminogen, 항트롬빈 III, 그리고 C3등의 혈중 농도들이 대체로 감소하였고 D-dimer 농도는 증가함으로써 명백한 범발성 혈관내 응고증이 관찰되었다. 본 연구 결과들은 내독소에 의해 응고계, 섬유소용해계, 그리고 보체계와 같은 여러경로의 활성화가 유도될 수 있으며, 이로해서 범발성 혈관내 응고증 및 이차적인 중복 장기기능 부전이 발생하리라는 점을 시사하고 있다. 결국, 이와같은 실험적인 내독소 유도 범발성 혈관내 응고증에 있어 응고계 및 섬유소 용해계의 활성을 일으키는 다양한 기전에 관한 축척된 지식들은 그와 같은 질병의 예방 혹은 치료방법을 제공해 줄 것이다.

• Archives of Plastic Surgery
• /
• 제38권2호
• /
• pp.207-211
• /
• 2011

Purpose: Surgery for thyroid gland requires skin incisions that can result in postsurgical neck scar. To overcome this, many surgeons performed a endoscopic thyroidectomy. But, this approach had a some problems. One of postoperative problems, iatrogenic cervical dystonia (CD) may occur. At common, CD is defined as a syndrome characterized by prolonged muscle contraction causing twisting, repetitive movements or abnormal posture. Botulinum toxin A (BTA, Botox$^{(R)}$, Allergan, Irvine, CA, USA) is well known treatment agent in the treatment of CD. So, the authors applied BTA injection in rare case with iatrogenic CD resulting in endoscopic thyroidectomy. Methods: A 43-year-old female had endoscopic subtotal thyroidectomy operation 3 years ago. She had symptoms such as progressive cervical pain, abnormal neck posture, depression, and sleep difficulty. About 1 year later, the patient who had previous myomectomy of the clavicular head of sternocleidomastoid muscle, however, symptoms were not improved. And then the patient received BTA therapy in our department. The 2 units per 0.1 mL solution was administered in a 1 mL tuberculin syringe. Results: The dose of BTA used in the patient was 36 units for vertical platysmal bands, superficially, and 10 units for ipsilateral sternocleidomastoid muscle, intramuscularly. After 2 weeks, additional the dose of BTA used in the patient was 5 points for remained scar bands, superficially. Complications related to injection such as significant swallowing difficulties, neck muscle weakness, or sensory change were not observed. In 9 months follow-up, the patient maintained a good result from the method of BTA injection alone. Conclusion: The basic concept is selective denervation for the hyperactive individual muscles and scar bands. We conclude that BTA is an effective and safe treatment for CD despite the iatrogenic and complex presentation of this complication.

• 자원환경지질
• /
• 제48권6호
• /
• pp.431-449
• /
• 2015

연구지역은 영남육괴 지리산지구에 분포하는 선캠브리아기 암주상 산청 회장암복합체 (이하, 회장암체)의 서부에 위치한다. 본 논문은 산청 회장암체에 대한 노두별 상세한 야외지질조사를 통하여 산청 회장암체의 암상, 엽리, 산상의 특징을 조사하고, 산청 회장암체의 형성과정과 그 메커니즘을 연구하였다. 산청 회장암체는 괴상형과 엽상형 산청 회장암 (이하, SA), 철-티탄 광체 (이하, FTO), 고철질 백립암 (이하, MG)으로 구분된다. 괴상형 SA를 제외한 산청 회장암체에는 엽리가 발달한다. 엽상형 SA, FTO, MG의 엽리는 SA가 완전히 고결되지 않은 물리적 상태에서 FTO 및 MG 용융체의 유동과 SA 블록들 사이의 상호운동의 결과로 형성된 마그마 엽리이며, 이들은 동원 마그마의 분화작용을 통해 연속적으로 형성되었다. 산청 회장암체는 괴상형 SA (고압 하에서 모 마그마의 1차 분별정출작용)${\rightarrow}$ 엽상형 SA [저압 하에서 모 마그마로부터 1차적으로 분화된 사장석-풍부 결정-용융 혼합체 (회장암질 마그마)의 2차 분별정출작용]${\rightarrow}$ FTO (회장암질 마그마의 2차 분별정출작용의 최종 분화단계에 잔류된 고철질 마그마의 압착여과작용에 의해 완전히 고화되지 않은 SA로 주입)${\rightarrow}$ MG (최종 잔류된 고철질 마그마의 고화작용) 순으로 형성되었다. 이는 산청 회장암체를 구성하는 괴상형과 엽상형 SA, FTO, MG는 성인과 시대를 달리하는 서로 다른 마그마의 분화 및 관입 산물이 아니라 동일시대의 동일기원 마그마로서 다단계 분별정출작용과 다중압력 결정화작용을 통해 형성되었음을 의미한다.