• Biomolecules & Therapeutics
• /
• 제16권3호
• /
• pp.203-209
• /
• 2008

The aim of this study was to investigate the hepatoprotective effect of $ACTIValoe^{(R)}$ N-931 complex, a mixture of Aloe vera and Silybum marianum, against acute liver injuries. Acute liver damages were induced by intraperitoneal injection of galactosamine (GalN, 700 mg/kg), naphthylisothiocyanate (ANIT, 40 mg/kg) and ethionine (500 mg/kg). $ACTIValoe^{(R)}$ N-931 (85, 170 and 340) was administered orally 48 h, 24 h, 2 h before and 6 h after the injection of hepatotoxins. At 24 h after GalN treatment the levels of serum aminotransferases and hepatic lipid peroxidation were significantly elevated, whereas hepatic glutathione, serum triglyceride (TG) and total cholesterol were decreased. These changes were attenuated by $ACTIValoe^{(R)}$ N-931 complex. The serum aminotransferase activities and total bilirubin significantly increased at 48 h after ANIT treatment, but were attenuated by $ACTIValoe^{(R)}$ N-931 complex. The bile flow was lower after ANIT treatment, which was restored by $ACTIValoe^{(R)}$ N-931 complex. $ACTIValoe^{(R)}$ N-931 complex reduced the ethionine-induced elevated hepatic TG contents. Histopathological analysis revealed that signs of liver injury were prominent at 24 h as result of ethionine injection, demonstrated by extensive areas of fatty change and microvesicular steatosis were observed around cells. These changes were attenuated by $ACTIValoe^{(R)}$ N-931 complex. Our results suggest that the $ACTIValoe^{(R)}$ N-931 complex has a protective effect on acute liver injury.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.343-344
• /
• 2006

Powder injection molding(PIM) is widely used for many parts in the field of automotives, electronics and medical industries, due to the capability of net shaping for complex 3-D geometry. Powder injection mold design fur the dental scaler tip, a component of medical appliance, was presented. In comparison with conventional machining process, powder injection molding has many advantages, specially in price and dimensional stability, for molding dental scaler tip which has complex geometry. Both product design and mold design for dental scaler tip were presented. The 'rapid mold' concept was applied to manufacture the various forms of dental scaler tip.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.980-983
• /
• 2002

We investigated the effect of quinolate metal complex layer as an electron injection layer on the performance of OLEDs and optimized the device efficiency by varying from 0.5 to 10nm thickness of Liq layer. OLED with a structure of indium tin oxide/$\alpha$-napthylphenylbiphenyl(NPB,40nm)/tris-(8-hydroxyquinoline)aluminum(Alq3, 50nm)/Aluminum(150nm) were fabricated in sequence. The device with 1nm Quinolate metal complex layer showed significant enhancement of the device performance.

• Design & Manufacturing
• /
• 제9권1호
• /
• pp.1-4
• /
• 2015

Recently, the mold industry has been developed to high-quality and high-productivity with various demands of the high-tech industry. Also, geometry parts of injection mold are complex and diverse optimum design through the injection molding analysis has become a matter of course. The mold industry is trying to revitalize the industry with demand technology development and manufacturing process improvement. However, products that have undercut is the need for a separate processing mechanism and structure of the mold is getting more complex, the cost is expensive. Therefore, improving the structure of the mold through a study on the forced ejecting for injection molding without undercut processing unit and to improve the productivity.

• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.73-83
• /
• 2014

CFD(computational fluid dynamics) model is developed to simulate direct injection of ammonia gas phase from ammonia transporting materials into the SCR catalyst in the exhaust pipe of the engine with solid SCR. Configurations of one-hole and four-hole nozzle, circumferential type, porous tube type, and the effect of mixer configurations which commonly used in liquid injection of AdBlue are considered for complex geometries. Mal-distribution index related to concentration of ammonia gas, flow uniformity index related to velocity distribution, and pressure drop related to flow resistance are compared for different configurations of complex geometries at the front section of SCR catalyst. These results are used to design the injection system of ammonia gas phase for solid SCR of target vehicle.

• 분석과학
• /
• 제36권1호
• /
• pp.1-11
• /
• 2023

A new, sensitive, and reliable flow injection methodology was investigated for the determination of lead ion (II) in vegetables' samples using a laboratory-prepared reagent 2-[(6-methoxy-2-benzothiazoly)azo]-4-methoxy phenol (6-MBTAMP). Infrared spectroscopy, UV-visible spectrophotometry, Energy dispersive X-ray spectroscopy (EDX), Elemental Analysis (CHN), nuclear magnetic resonance spectroscopy ¹HNMR, and ¹³CNMR techniques were used to characterize the reagent and lead (II) complex. The method is based on lead ion (II) reacting with the reagent (6-MBTAMP) in a neutral solution to produce a green-red complex with a maximum absorbance at 670 nm. The optimum conditions, such as flow rate, lead ion (II) volume, reagent volume, medium pH, reagent concentration, and reaction coil length were thoroughly examined. The limits of detection (LOD) and quantification (LOQ) were determined to be 0.621 mg·L^-1 and 2.069 mg·L^-1 , respectively, while Sandell's sensitivity was determined to be 0.345 ㎍·cm^-2.

• Animal cells and systems
• /
• 제14권2호
• /
• pp.91-98
• /
• 2010

Male rats were given a single injection of iron, and temporal changes in iron content and iron-induced effects were examined in heart cellular fractions. Over a period of 72 h, the contents of total and labile iron, reactive oxygen species, and NO in tissue homogenate, nuclear debris, and postmitochondrial fractions were mostly constant, but in mitochondria they continuously increased. An abrupt decrease in membrane potential and NAD(P)H at 12 h was also found in mitochondria. The respiratory control ratio was reduced slowly with a slight recovery at 72 h, suggesting uncoupling by iron.While the ATP content of tissue homogenate decreased steadily until 72 h, it showed a prominent increase in mitochondria at 12 h. Total iron and calcium concentration also progressively increased in mitochondria over 72 h. Enzyme activity of the oxidative phosphorylation system was significantly altered by iron injection: activities of complexes I, III, and IV were reduced considerably, but complex II activity and the ATPase activity of complex V were enhanced. A reversal of activity in complexes I and II at 12 h suggested reverse electron transfer due to iron overload. These results support the argument that mitochondrial activities including oxidative phosphorylation are modulated by excessive iron.

• 한국분말재료학회지
• /
• 제22권1호
• /
• pp.1-5
• /
• 2015

Powder injection molding is an important manufacturing technology to mass produce superalloy components with complex shape. Injection molding step is particularly important for realizing a desired shape, which requires much time and efforts finding the optimum process condition. Therefore computer aided engineering can be very useful to find proper injection molding conditions. In this study, we have conducted a finite element method based simulation for the spiral mold test of superalloy feedstock and compared the results with experimental ones. Sensitivity analysis with both of simulation and experiment reveals that the melt temperature of superalloy feedstock is the most important factor for the full filling of mold cavity. The FEM based simulation matches well the experimental results. This study contributes to the optimization of superalloy powder injection molding process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.270-274
• /
• 2005

The capability of net shaping for complex 3-D geometry, powder injection molding(PIM) is widely used for parts in the field of automotives, electronics and medical industry. Powder injection mold design for dental scaler tip, a component of medical appliance, was presented. In comparison with conventional machining process, powder injection molding has many advantages, specially in price and dimensional stability, for molding dental scaler tip. Product design and mold design for dental scaler tip was presented. Short shot experiment with scaler tip PIM mold and several defect (flash etc.) during injection molding process was discussed.

• Journal of Korean Neurosurgical Society
• /
• 제59권5호
• /
• pp.529-532
• /
• 2016

Complex regional pain syndrome (CRPS) type II is a syndrome that develops after nerve injury. Symptoms may be severe, and vary depending on the degree of sympathetic nerve involvement. As yet, there is no satisfactory treatment. We report the case of a female patient who had an L5 left transverse process fracture and an S2 body fracture, who developed symptoms of CRPS type II in her left lower leg that were aggravated during ambulation in spite of absolute bed rest for one month after the trauma. Several treatments, including bed rest, medication, and numerous nerve blocks were attempted, but the pain persisted. We finally tried injection of polydeoxyribonucleotide (PDRN) solution at the left L5 transverse process fracture site because we knew of the anti-inflammatory effect of PDRN. One day after this treatment, her symptoms had almost disappeared and three days later, she was discharged. We will also further discuss the possibility of using PDRN solution for the treatment of CRPS.