The decrease in the school-age population caused the closure of private universities, but the guidelines at closed private universities are ambiguous, causing confusion. Therefore, this study intends to suggest a plan to utilize the closed school university. The government aims to increase the possibility of selling closed schools by preventing alley slums through the recovery of alley commercial districts and local communities. The data were collected through a Google survey from September 30 to October 8, 2021 and an on-site interview conducted on October 2, 2021. A total of 84 nearby citizens of the closed school university were surveyed, and on-site interviews were conducted with a total of five people. The collected data suggested the direction of utilization plan for closed school building. This study will present a model for the use of closed school property in the future and contribute to the establishment of urban regeneration policies.
Journal of Korean Society of Disaster and Security
/
v.15
no.2
/
pp.27-36
/
2022
The adequacy of industrial water supply is one of the core elements of the construction of industrial complexes. This study examined the supply of industrial water through various ways, according to the planning and creation of industrial complexes and the operating utilization rate of tenant companies oksan industrial complex. As for calculating the supply of industrial water and establishing water supply plan, the basic data analysis and the land use plan are utilised. The adequacy of calculating the basic unit by industry, which is the basis for calculating industrial water, was evaluated. In addition, analyzed industrial water usage data and the raw unit of each industry was compared with the actual data from the Oksan Industrial Complex, which selected as the research target area among the industrial complexes in Cheongju-si administrative districts, where actual data can be secured. The result of the study shows that the peak load rate of industrial water was found to have the peak load of more than twice as the result of analyzing the actual usage, and the basic unit of industrial water industry showed a significant difference from the actual usage. In particular, the decreasing rate of the basic units was significant comparing the increasing rate of basic units. In addition, the raw unit of the industry that uses more water decreased significantly, and the raw unit of the industry that uses less water increased slightly.
Kim, Jae-Hoon;Wee, Seong-Seung;Nam, Sang-Hoon;An, Jung-Sun;Kim, Dae-Sun
Journal of Environmental Health Sciences
/
v.34
no.1
/
pp.1-11
/
2008
The purpose of this study was to investigate air quality in Chungju, Korea, using data obtained with a local air quality monitoring system. We have utilised cohort studies to investigate the relations between environmental pollution and the health of residents near large industrial complexes since 2004. This study analyzes the $O_3,\;NO_2,\;SO_2,\;CO\;and\;PM_{10}$ concentration in Chungju from 2002 to 2006. Air pollutants are closely related to the number of manufacturing facilities and cars, energy utilization and weather conditions. Generally, the diurnal concentration of air pollutants in Chungju reached the highest level in the morning (about$08:00{\sim}$) and early evening (about$19:00{\sim}$). On the other hand, the diurnal concentration of ozone as recorded gives the highest amount in late afternoon (about$16:00{\sim}$) and lowest in early morning (about$08:00{\sim}$). The concentration of air pollutants in Chungju was highest from winter to spring and lowest during the summer season. On the other hand, the monthly variation of ozone concentration was greatest in June and smallest in December. Also the, $PM_{10}$ concentration posted the highest record in April and the lowest during September. In general, this study analyzed air pollution changes in Chungju as well as in large scale industrial complex regions within Korea such as Ulsan, Pohang, Kwangyang, Sihwa Panwol and Gangneung in Korea. We compared the air quality of Chungju with those of these cites and found that air pollutants except for CO in Chungju was generally lower than large industrial complex regions.
Fusarium isolates of Gibberella fujikuroi species complex were obtained from sorghum grown in five provinces of Korea in 1996 and 1997. These isolates were characterized based on their mating behavior, mycotoxin production, and vegetative compatibility. Only three mating populations (A, D, and F) were recovered from a total of 155 isolates examined. The relative frequency of the mating populations was significantly different: F was predominant (80%), while D and A were observed at low frequencies of 9% and 3%, respectively. Female fertile isolates were more common within F (44 our of 124) than D (2 out of 14), while none of the five A isolates were female fertile. The inbreeding effective population sizes ($\textrm{N}_e$)for mating type and male/hermaphrodite ratios in mating populations A and D produced significant amounts of fumonisins, while F isolates produced none or only traces of fumonisin B$_1$. In contrast. F isolates produced higher amounts of moniliformin (average of 3,820 ppm) than A and D isolates (averages of 77 and 1,819 ppm, respectively). Fifty-one isolates were tested for vegetative compatibility using nitrogen non-utilization mutants of each isolate, and 44 vegetative compatibility groups (VCGs) were identified. A single VC type (VC1) was found in all of the five A isolates examined. Six of the D isolates examined consisted of three VC types: two for VC2, two for VC3, and the rest for VC4. All of the F isolates tested were incompatible in every combination and , thus, each constituted a unique VCG.
The Journal of Korea Institute of Information, Electronics, and Communication Technology
/
v.8
no.4
/
pp.281-298
/
2015
From the complexity system theory, City is dynamic system which has evolved through evolution and adaptation in initial conditions and different situation. So people's active should involve in decision-making processes in the urban planning. And this suggests that responding to the demands of its citizens are important factors influencing the process of urban planning. The implications of this study are following: using big data helps people understand current social phenomena. Specifically, it figured out latent needs of citizens that traditional survey methods could not before. we can make the most of new opportunities given by digital data and prevent potential dangers in advance. They are complementary and do not replace one another.
This study was performed to enhance contents of low molecular weight ginsenoside Rh2 and Rg3 using an ultra high pressure and steaming process in wild cultured-Root in wild ginseng. For selective increase in contents of Rg3 and Rh2 in cultured wild ginseng roots, an ultra high extraction was applied at 500MPa for 20 min which was followed by steaming process at $90^{\circ}C$ for 12 hr. It was revealed that contents of ginsenosides, Rb1, Rb2, Rc and Rd, were decreased with the complex process described above, whereas contents of ginsenoside Rh2 and Rg3 were increased up to 4.918 mg/g and 6.115 mg/g, respectively. In addition, concentration of benzo[${\alpha}$]pyrene in extracts of the cultured wild ginseng roots treated by the complex process was 0.64 ppm but it was 0.78 ppm when it was treated with the steaming process. From the results, it was strongly suggested that low molecular weight ginsenosides, Rh2 and Rg3, are converted from Rb1, Rb2, Rc, and Rd which are easily broken down by an ultra high pressure and steaming process. This results indicate that an ultra high pressure and steaming process can selectively increase in contents of Rg3 and Rh2 in cultured wild ginseng roots and this process might enhance the utilization and values of cultured wild ginseng roots.
In customer-oriented make-to-order manufacturing environments, the works of BOM changes due to the changes of product specification and engineering are closely connected with almost all departments such as sales, engineering, production, procurement, cost, after service, etc within an enterprise. So, the contents of BOM changes must be instantly reflected on the related works among the departments. To effectively process these complex works of BOM changes, types of changes on product specification and engineering and types of BOM changes linked with those must be systematically defined, classified and managed by information systems. Thus, it is necessary to introduce solutions such as BPM and SOA in order to efficiently deal with complex business processes like BOM change management. This paper proposes a methodology of constructing information systems based on BPM and SOA. The proposed methodology defines the relationship between processes of BPM for definition, execution, monitoring, etc of business processes and services of SOA for connection among information systems within an enterprise, and presents a scheme of practically applying BPM and SOA solutions to actual business works. To show an utilization of the proposed methodology, the prototype system for product BOM management is implemented in order to efficiently deal with the works of BOM changes due to the changes of product specification and engineering.
Journal of Korean Society of Industrial and Systems Engineering
/
v.39
no.1
/
pp.153-161
/
2016
Semiconductor manufacturing has suffered from the complex process behavior of the technology oriented control in the production line. While the technological processes are in charge of the quality and the yield of the product, the operational management is also critical for the productivity of the manufacturing line. The fabrication line in the semiconductor manufacturing is considered as the most complex part because of various kinds of the equipment, re-entrant process routing and various product devices. The efficiency and the productivity of the fabrication line may give a significant impact on the subsequent processes such as the probe line, the assembly line and final test line. In the management of the re-entrant process such as semiconductor fabrication, it is important to keep balanced fabrication line. The Performance measures in the fabrication line are throughput, cycle time, inventory, shortage, etc. In the fabrication, throughput and cycle time are the conflicting performance measures. It is very difficult to achieve two conflicting goal simultaneously in the manufacturing line. The capacity of equipment is important factor in the production planning and scheduling. The production planning consideration of capacity can make the scheduling more realistic. In this paper, an input and scheduling rule are to achieve the balanced operation in semiconductor fabrication line through equipment capacity and workload are proposed and evaluated. New backward projection and scheduling rule consideration of facility capacity are suggested. Scheduling wafers on the appropriate facilities are controlled by available capacity, which are determined by the workload in terms of the meet the production target.
Journal of Korean Society of Occupational and Environmental Hygiene
/
v.19
no.3
/
pp.182-194
/
2009
This study was conducted to evaluate health status and to propose health protection measures of irregular plant construction workers in Yoesu National Industrial Complex (YNIC). The status of safety and health management was examined in five areas including safety and health education, work environment monitoring, health examination, health management record, and personal protective equipment (PPE) for plant construction workers. The safety training rate for plant construction workers was reached high at 91%, The training was mostly consisted of safety accident related things, but training on hazardous materials was found to be insufficient. Workplace monitoring results showed that the compliance rate for work environment for irregular construction workers was 54% and workplace monitoring during turnaround (TA) period with high risk of exposure to hazardous agents has not been implemented. While 61.4% of irregular workers received the general health examination but only 36.8% received the special health examination. The special health examination was found to be conducted only upon welders from 2-3 years ago. The issue of health management record upon irregular construction workers was not being implemented. In case of PPE, basic safety protective equipments such as safety shoes, safety belt, safety helmet were being supplied well while the supply rate of respirator for organic vapor was relatively low at 40%. Based on this study, two suggestions to maximize the utilization of the current safety and health program were made while boosting its effectiveness in protecting workers' health. First, the role of owners (petrochemical plant) related to safety and health should be strengthened. Second, in consideration of the characteristics of construction workers who usually engage in short term employment and frequent movement, community based health management organization is suggested that can overcome such structural problem and carry out the implementation of health examination and sustained health management.
Kim, Seon-Geun;Cho, Jun-Hyun;Hwang, Young-Sook;Lee, In-Seok;Oh, Kwang-Soo
Korean Journal of Fisheries and Aquatic Sciences
/
v.50
no.6
/
pp.650-655
/
2017
Extraction methods for cultured sea mussels Mytilus edulis and the quality characteristics of resulting extracts were investigated. The crude protein, carbohydrate and volatile basic nitrogen content of raw sea mussels was 15.2%, 1.9%, and 11.2 mg/100 g, respectively. Extracts were prepared using three different methods: hot-water extract (WE), scrap enzymatic hydrolysate extraction (SE), and complex extraction (CE). The respective extracts contained 5.5%, 8.6%, and 6.6% crude protein; 281.7, 366.0, and 343.0 mg/100 g amino nitrogen,: and 2.0%, 1.1% and 1.8% salinity. Their extraction yields were 689, 323, and 1,012 mL/kg. The CE method was superior to the traditional WE method in terms of extraction yield, amino-nitrogen content, and organoleptic qualities, but not odor. Active taste components were evaluated and the total free amino acid content of the WE and CE methods was 5,667.0 and 7,006.3 mg/100 g, respectively. The concentrations of major components (for WE and CE methods, respectively) were as follows: glutamic acid (1,244.0 and 955.4 mg/100 g), taurine (987.9 and 746.8 mg/100 g), glycine (721.2 and 847.0 mg/100 g), alanine (341.9 and 423.8 mg/100 g), arginine (265.5 and 376.5 mg/100 g), lysine (199.8 and 270.4 mg/100 g), and proline (253.9 and 220.3 mg/100 g). In conclusion, these results demonstrate that there is potential for using the CE method to expand the commercial utilization of sea mussels as a flavoring substance resource.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.