• 한국식품영양과학회지
• /
• 제25권4호
• /
• pp.715-719
• /
• 1996

Dietary fibers consist mostly of complex carbohydrates such as cellulose, hemicelluloses and pectins, and also included are carbohydrate-based gums or hydrocolloids exampled as alginate, carrageenan, galactomannan xanthan, etc. Due to structural diversity, dietary fibers can be classified by various ways i.e., source, plant function, solubility, charge and topology. Understanding on the plant cell wall structure is of primary importance, since physicochemical properties of dietary fibers are dependent on the existence patterns in the cell wall. Depending on the four distinct observational dimensions, the physical parameters of dietary fibers were discussed in terms of raw sources, bulky & complex plant cell wall materials, individually separated hydrocolloid materials and specifically designed materials. Each existence state possesses the distinct physical parameters governing a variety of physiological properties of dietary fibers.

• 한국환경과학회지
• /
• 제16권1호
• /
• pp.27-32
• /
• 2007

In this study, the concentrations of offensive odorous compounds seasonally emitted from the chemical plant at Chongju industrial complex in Korea were determined by the analytical methods of gas chromatography, high performance liquid chromatography and uv/vis spectroscopy. The kinds of offensive odorous compounds examined are formaldehyde, acetaldehyde, butyl aldehyde, propion aldehyde, n-valeric aldehyde, iso-valeric aldehyde, hydrogen sulfide, methyl mercaptan, dimethyl sulfide, dimethyl disulfide, trimethyl amine and ammonia. The seasonally emission levels of all odorous compounds except dimethyl sulfide at 13 sampling points of plant were lower than those of the regulation standard levels of the industrial complex in Korea. The levels were the highest in June, and lowest in December. The propion aldehyde and iso-valeric aldehyde in June and December, butyl aldehyde in December, and n-valeric aldehyde were not detected in all the three seasons at any sampling points of the plant examined. But in June, dimethyl sulfide was emitted up to 16 times than that of the regulation level.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.235-240
• /
• 2005

Recently urban utility plants in urban areas of Korea, such as energy supply systems, municipal waste incineration systems, sewage treatment systems and so on, have caused some critical troubles, for instance the insensitive response to the seasonal or daily variation of loads, the low system efficiency and inefficient use of energy because of the large-scale system located a great distance. Therefor the design method of optimal integrated system model of various urban utility plants proposed in this study suitably to the present situation of Korea. Also, the effect analysis for the introduction of compound utility plants was studied for a new town model on a 60,000 persons scale. As the results we found that the complex plant was superior to individual urban utility plant in side of the initial investment expenses, the operating cost and other reasons.

• 식물조직배양학회지
• /
• 제21권6호
• /
• pp.363-367
• /
• 1994

식물 세포의 신호전달 기작에 있어 calmodulin (CaM)의 역할을 조사하기 위하여 외부기원의 CaM을 식물 세포 내로 주입하였다. 이를 위하여 bovine testis로부터 CaM을 분리, 정제하여 SDS-PAGE상에서 순수함을 확인하였고, 이를 세포 내로 주입한 후 실제 주입 여부를 확인하기 위해 정제된 CaM을 미리 fluorescein isothiocyanate (FITC)로 표식하여 사용하였다. 또한, FITC-CaM complex의 농도에 따른 fluorescent intensity를 측정하여 주입된 CaM의 농도를 결정하였다. 대두 현탁 배양 세포를 saponin (0.1 mg/mL)이 포함된 배지에서 15분간 배양하여 permeabilization시키고,FITC-CaM (1mg/mL)을 30분간 처리한 후 형광현미경으로 조사했을 때 세포질에서 강한 형광이 나타났으며, 이 결과로 외부의 calmodulin이 세포 내로 주입되었음을 확인할 수 있었다. 대두 현탁 배양 세포에 3가지의 세포벽 분해 효소를 처리하여 원형질체를 분리하였고, 이 원형질체를 FITC-CaM이 들어있는 완충용액에 넣고 electroporation 하였을때 capacitance와 field strength가 증가할수록 원형질체의 생존률은 감소하였으나, 세포 내의 fluorescent intensity는 증가하였다. 이것은 외부의 calmodulin이 electroporation에 의해 대두의 원형질체 내로 도입되었음을 의미하는 것이다.

• 한국환경과학회지
• /
• 제33권2호
• /
• pp.161-168
• /
• 2024

This study was conducted to identify the pollutants generated by the fuel complex and to determine the health effects of the surrounding residents. In addition, based on the results of epidemiological surveys and health impact surveys of local residents, we analyze the distribution of patient groups and exposure characteristics according to the distance from the fuel complex boundary. Samples were collected from the briquette plant within the fuel complex and analyzed by SEM-EDXA, X-ray Fluorescence Spectrometer, and ICP. In addition, the distribution of patients and exposure characteristics were analyzed according to the distance from the fuel complex and yard boundaries. Analysis of briquette samples from the fuel complex showed that the average particle size was 10-30 ㎛, the shape was irregular, and SiO₂ accounted for more than 50%. It is believed that silica, which causes pneumoconiosis, may have been scattered into the air. In particular, there was a large distribution of 5 ㎛ particles that affect respiratory diseases. According to the analysis of the residential addresses and distribution of pneumoconiosis cases, many pneumoconiosis cases were located in the area between 200 and 500 meters from the boundary of the fuel complex. In addition, 28 pneumoconiosis cases were identified as a result of the epidemiological survey and health impact survey at the fuel complex. In detail, there were 8 cases of occupational pneumoconiosis, 6 cases of environmental pneumoconiosis, and 14 cases of occupational and environmental pneumoconiosis. The confirmed pneumoconiosis cases were located between 0.3 and 1.1 kilometers from the fuel complex. It was found that environmental pollutants generated by the fuel complex adversely affect the health of local residents. In particular, there are many cases of pneumoconiosis in the area between 200 and 500 meters from the boundary of the fuel complex, and this distance is considered to be the direct and indirect impact zone of the briquette plant.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 2001년도 춘계학술발표대회:발표눈문요지록
• /
• pp.24-24
• /
• 2001

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2021년도 춘계학술대회
• /
• pp.113-113
• /
• 2021

• Journal of Species Research
• /
• 제1권2호
• /
• pp.232-239
• /
• 2012

Taxonomy of umbelliferous taxa Heracleum moellendorffii complex has been unclear in their species delimitation in the far-eastern Asian regions. In both Korea and China Heracleum moellendorffii was adopted for their description while H. sphondylium was chosen to describe Japanese Heracleum. From Genbank accessions, taxa collected from Kamtchatka and Promorskiy, Russia were defined as H. maximum, endemic taxon to North America. In this study, we reviewed the taxonomy of Heracleum moellendorffii complex in Korea and neighboring countries on the basis of molecular phylogenies derived from sequences of nuclear ribosomal DNA internal transcribed spacer (ITS) regions. From three Korean accessions of Heracleum investigated in this study, two types of ITS sequences were obtained; two accessions were related to Chinese H. moellendorffii var. moellendorffii and North American H. maximum without forming a clade while the other one was identical to accession from H. maximum from Primorskiy, Russia. In the other hand, Japanese H. moellendorffii (=H. sphondylium ssp. sphondylium var. nipponicum in the flora of Japan) was closely related to H. maximum accessions from Korea and Russia, not nested within the clade comprising several subspecies of H. sphondylium. In order to delimit species boundaries among putatively closely related Heracleum species in fareastern Asian countries, more samples and much more rapidly evolved DNA regions must be investigated with interpretation of morphological and anatomical features.

• 한국건설관리학회논문집
• /
• 제9권1호
• /
• pp.66-76
• /
• 2008

플랜트공사는 토목, 건축, 기계, 전기 공종들이 연동되어 작업이 진행되는 복합공종이다. 또한 일반 공사와 비교시 매우 짧은 공기에 대규모의 공사를 수행하여야 하는 공정상의 특징을 갖고 있다. 이러한 특성들로 인하여 플랜트공사에서 공정관리는 매우 중요한 요소가 되고 있다. 4D CAD에 의한 공정정보의 시각화는 이러한 복합공정에서 더욱 필요성을 갖게 된다. 본 연구에서는 플랜트공사의 특성을 고려한 4D CAD시스템 기능 구성방법론과 실제 시스템 개발을 시도한다. 이를 위하여 플랜트공사 현장의 공정작업 특성을 분석한 후 4D CAD 기능을 구성함으로써, 기존 시스템에서 시도되지 않은 플랜트공사에 특화된 공정시각화 기능구축을 시도하고 있다.

• The Plant Pathology Journal
• /
• 제33권3호
• /
• pp.213-228
• /
• 2017

Plasmodesmata (PDs) are specialized intercellular channels that facilitate the exchange of various molecules, including sugars, ribonucleoprotein complexes, transcription factors, and mRNA. Their diameters, estimated to be 2.5 nm in the neck region, are too small to transfer viruses or viral genomes. Tobacco mosaic virus and Potexviruses are the most extensively studied viruses. In viruses, the movement protein (MP) is responsible for the PD gating that allows the intercellular movement of viral genomes. Various host factors interact with MP to regulate complicated mechanisms related to PD gating. Virus replication and assembly occur in viral replication complex (VRC) with membrane association, especially in the endoplasmic reticulum. VRC have a highly organized structure and are highly regulated by interactions among the various host factors, proteins encoded by the viral genome, and the viral genome. Virus trafficking requires host machineries, such as the cytoskeleton and the secretory systems. MP facilitates the virus replication and movement process. Despite the current level of understanding of virus movement, there are still many unknown and complex interactions between virus replication and virus movement. While numerous studies have been conducted to understand plant viruses with regards to cell-to-cell movement and replication, there are still many knowledge gaps. To study these interactions, adequate research tools must be used such as molecular, and biochemical techniques. Without such tools, virologists will not be able to gain an accurate or detailed understanding of the virus infection process.