• Proceedings of the Korean Statistical Society Conference
• /
• 2004.11a
• /
• pp.295-300
• /
• 2004

We consider a G/M/1 queue with two-stage service policy. The server starts to serve with rate of ${\mu}1$ customers per unit time until the number of customers in the system reaches A. At this moment, the service rate is changed to that of ${\mu}2$ customers per unit time and this rate continues until the system is empty. We obtain the stationary distribution of the number of customers in the system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.50-55
• /
• 1986

Characteristics of the flow and heat transfer in a channel of 37 rods are investigated numerically. The flow is taken to be a fully developed incompressible laminar flow and it has an uniform temperature profile at the inlet and flows down through the channel of constant wall temperature. A boundary-fitted coordinate system is used for the complex geometry. Calculation is initiated by calculating the developed flow profile and then proceeds to temperature development. Through the calculation the details of the flow and temperature distribution characteristics are found, and discussion is made on the mechanism of the transport phenomena in the complex geometry in terms of wall shear stress distribution, non-dimensionalized velocity, friction factor, Nusselt number distribution, Reynolds number, and porosity. Also the effects of the eccentricity in rod configuration are analyzed and its importance is emphasized.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.90-101
• /
• 1996

Determination of assembly sequence of components is a key issue in assembly operation. Although a number of articles dealing with assembly sequence determination have appeared, an efficient and general methodology for complex products has yet to appear. The objective of this paper is to present the problems and models used to generate assembly sequence from design data. An essential idea of this research is to acquire a finite number of voxels from any complex geometric entity, such as 3D planar polygons, hollow spheres, cylinders. cones, tori, etc. In order to find a feasible assembly sequence, the following four steps are needed: (1) The components composing of an assembly product are identified and then the geometric entities of each component are extracted. (2) The geometric entities extracted in the first step are translated into a number of voxels. (3) All the mating or coupling relations between components are found by considering relations between voxels. (4) The components to be disassembled are determined using CCGs (Component Coupling Graph).

• Korean Journal of Ichthyology
• /
• v.22 no.1
• /
• pp.56-60
• /
• 2010

The Cobitis hankugensis-Iksookimia longicorpa complex from Korea has been presumed to be a unisexual lineage, originating from C. hankugensis and I. longicorpa and having almost all females. Recently, it was confirmed that the complex consisted of one diploid and two triploid complexes. From observation of their oocyte envelopes, three forms could be classified: a villous projection in I. longicorpa, a granular one in C. hankugensis and two triploid complexes, and a granule with villous one in the diploid complex. Even within the same granular projection, they showed specific features in length and density number from each other. These architectures are first observed in cobitid complexes and may playa role in identification of diploids and triploids.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.1037-1054
• /
• 2014

In this study, the status of coastal fisheries was examined based on the catch and number of fishing vessels of coastal fisheries in Korea. Comparing the status on coastal fisheries of the East Sea, Yellow Sea and South Sea in Korea, scientific evidence was made for fisheries management on coastal fisheries based on characteristics of each sea area. From 1990 to 2011, the catch of coastal fisheries in Korean waters ranged from 150,000 mt to 230,000 mt, with an average of 190,000 mt, and it accounted for 15% in average of total catch fished in adjacent waters of Korea. In order of catch by coastal fisheries, gillnet (36.7%) was the primary fishery, followed by coastal complex (24.7%), stow net (18.3%), trap (12.9%), lift net (3.9%), purse seine (3.0%) and beam trawl (0.4%) fisheries. In order of catch by species, anchovy (15.0%) had the largest proportion of total catch, followed by common squid (10.3%), akiami paste shrimp (5.2%), blue crab (3.9%) and octopus (3.7%). Of the average catch by sea area from 1990 to 2011, Yellow Sea, South Sea and East Sea were 37.4%, 34.6% and 28.0%, respectively. Since 2000s, however, the average catch of South Sea has accounted for the largest proportion. The number of permitted fishing vessels involved in 8 coastal fisheries was 55,336 vessels in average from 1997 to 2011. The number of vessels was about 47,000 vessels in 1997, and increased to 61,300 vessels until 2000, then has decreased to 44,000 vessels operating in 2011. In order of the number of permitted fishing vessels by fisheries, complex (52.4%) took the first place, followed by gillnet (31.5%), trap (13.4%), stow net (0.8%), beam trawl (0.8%), purse seine (0.6%), lift net (0.4%) and seine net (0.0%). In order of the number of permitted fishing vessels by sea area, South Sea (29,994 vessels) took the first place, followed by Yellow Sea (18,185 vessels) and East Sea (7,158 vessels). In order of the catch per unit effort (CPUE, mt/vessels) which was analyzed using catch and number of vessels in average by fishery, stow net is the highest followed by lift net, trap, purse seine, gill net, beam trawl and complex fisheries. In particular, the CPUE of complex and gill net fisheries, which accounted for the largest number of vessels were 4.0 mt/vessels and 1.6 mt/vessels, respectively. Since those are too low relative to other fisheries, it was judged to need systematical management on both fisheries.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.116-121
• /
• 2023

In this paper, we develop a deep learning structure for a complex microbial incubator that applies deep learning prediction result information. The proposed complex microbial incubator consists of pre-processing of complex microbial data, conversion of complex microbial data structure, design of deep learning network, learning of the designed deep learning network, and GUI development applied to the prototype. In the complex microbial data preprocessing, one-hot encoding is performed on the amount of molasses, nutrients, plant extract, salt, etc. required for microbial culture, and the maximum-minimum normalization method for the pH concentration measured as a result of the culture and the number of microbial cells to preprocess the data. In the complex microbial data structure conversion, the preprocessed data is converted into a graph structure by connecting the water temperature and the number of microbial cells, and then expressed as an adjacency matrix and attribute information to be used as input data for a deep learning network. In deep learning network design, complex microbial data is learned by designing a graph convolutional network specialized for graph structures. The designed deep learning network uses a cosine loss function to proceed with learning in the direction of minimizing the error that occurs during learning. GUI development applied to the prototype shows the target pH concentration (3.8 or less) and the number of cells (10⁸ or more) of complex microorganisms in an order suitable for culturing according to the water temperature selected by the user. In order to evaluate the performance of the proposed microbial incubator, the results of experiments conducted by authorized testing institutes showed that the average pH was 3.7 and the number of cells of complex microorganisms was 1.7 × 10⁸. Therefore, the effectiveness of the deep learning structure for the complex microbial incubator applying the deep learning prediction result information proposed in this paper was proven.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.2
• /
• pp.153-164
• /
• 2016

Developed countries in agriculture like Netherlands, Belgium and England, have managed Green Care policy and project during the last decades. The needs in Green Care is also increasing as new growth power in rural area of Korea. This study investigated sites which are already operating as complex with Green Care theme. This study surveyed the operating conditions like type, scale, location pattern, purpose, customer and finance for cases of the complex. The period of the survey is from 2015. 8. 11 to 2015. 09. 10 for the 24 activated cases in aspect of operation and management. Among the 24 cases, 16 cases were classified as Green Care Complex which facilities are aggregated a place, and the other 8 cases as Green Care Cluster which are distributed at several places. The analysis result showed that there were apparent distinction among cases in total budget, costs of construction, capacity for guest, and the total number of annual visitors. Despite of the type and scale the accommodation cost, the number of workers, and amount of sales have small deviation in distribution of values, although the cases have various type of contents and scale of space. The result of this study can be used as data of bench marking to develop the Green Care Complex or Cluster in rural area.

• Korean Journal of Metals and Materials
• /
• v.46 no.4
• /
• pp.199-208
• /
• 2008

This study is concerned with effects of complex oxides on Charpy impact toughness of heat affected zone (HAZ) of API X80 linepipe steels. Three kinds of steels were fabricated by varying alloying elements such as Ti, Al, and Mg and hot-rolling conditions to form complex oxides, and their microstructures and Charpy impact properties were investigated. The number of complex oxides present in the steel containing excess Ti, Al, and Mg was twice larger than that in the conventional steels, while their size ranged from 1 to $3{\mu}m$ in the three steels. After the HAZ simulation test, the steel containing a number of oxides contained about 20 vol.% of acicular ferrite in the simulated HAZ, together with bainitic ferrite and martensite, whereas the HAZ microstructure of the conventional steels consisted of bainitic ferrite and martensite with a small amount of acicular ferrite. This formation of acicular ferrite in the oxide-containing steel was associated with the nucleation of acicular ferrite at complex oxides, thereby leading to the great (five times or more) improvement of Charpy impact toughness over the conventional steels.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.2
• /
• pp.39-44
• /
• 1989

(N-docosyl pyridinium)-TCNQ(1:1) complex was synthesized by reacting N-docosyl pyridinium bromide and LiTCNQ. This complex was investigated and confirmed by elemental analysis. U.V, I.R spectra. A stability to the dispersion solvent, which is acetonitrile, dichloromethane, benzene, chloroform and acetonitrile-benzene (1:1, V/V) of (N-docosyl pyridinium)-TCNQ(1:1) complex was investigated by U. V spectrophotometer and was confirmed stabilized on acetonitrile, benzene and acetonitrile-benzene(1:1'V/V) for 7 hours. Using ultra pure water as subphase for L-B film deposition, the Y-type L-B film of (N-docosyl pyridinium)-TCNQ(1:1) complex was farbricated. The electrical conductivities on a perpendicular direction of the L-B film were measured to be $5{\times}10^{-5}{\sim}5{\times}10^{-14}$S/cm according to the number of layer.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.04a
• /
• pp.37-44
• /
• 1993

There are a lot of linear dynamic analysis methods for complex structures. Each method has advantages and shortcomings. Method of dynamic analysis for complex structure is selected considering characteristics of dynamic loading, computer facility available number of degree of freedem and accuracy of results. It is a main point of view to get economical results rather then accurate ones for analysis of general complex structures, Mode superposition method and direct integration method are generally used. However, the characteristics of load is not considered in mode superpositon method, the personal computer cannot be used in direct integration methods. To over-come these shortcomings, the component mode method incorporating Ritz algorithm updated is proposed to solve economically dynamic behavior of the structures. The purpose of study is a formulation of algorithm, and computer programing suitable for dynamic analysis of the complex structure in personal computer environment.