• Smart Structures and Systems
• /
• 제19권3호
• /
• pp.269-277
• /
• 2017

Recently, there has been significant interest in structural health monitoring for civil engineering applications. In this research, a specially designed tendon, proposed by embedding FBG sensors into the center king cable of a 7-wire strand tendon, was applied for long-term health monitoring of tensile forces on a ground anchor. To make temperature independent sensors, the effective temperature compensation of FBG sensors must be considered. The temperature sensitivity coefficient ${\beta}^{\prime}$ of the FBG sensors embedded tendon was successfully determined to be $2.0{\times}10^{-5}^{\circ}C^{-1}$ through calibrated tests in both a model rock body and a laboratory heat chamber. Furthermore, the obtained result for ${\beta}^{\prime}$ was formally verified through the ground temperature measurement test, expectedly. As a result, the ground temperature measured by a thermometer showed good agreement compared to that measured by the proposed FBG sensor, which was calibrated considering to the temperature sensitivity coefficient ${\beta}^{\prime}$. Finally, four prototype ground anchors including two tension ground anchors and two compression ground anchors made by replacing a tendon with the proposed smart tendon were installed into an actual slope at the Yeosu site. Tensile forces, after temperature compensation was taken into account using the verified temperature sensitivity coefficient ${\beta}^{\prime}$ and ground temperature obtained from the Korean Meteorological Administration (KMA) have been monitored for over one year, and the results were very consistent to those measured from the load cell, interestingly.

• 정보처리학회논문지B
• /
• 제11B권3호
• /
• pp.345-352
• /
• 2004

본 논문에서는 자유음장 모델을 기초로 5.1채널 스피커 시스템의 보상함수를 해석하고, 이를 심리음향에 기초한 바크 스케일(bark scale) 등 가 보상 밴드패스 필터에 적용하여 주파수 제한적인 음질 보상에 대한 실험을 통해 5.1채널 스피커 시스템에서 음향 재현시 나타나는 크로스토크를 제거함으로써 보다 입체적인 음을 재현하는 방법을 제안하였다. 정면 채널과 서라운드 채널의 음원을 기존의 2채널 및 5.1채널 시스템에서 제시하는 음원과 비교를 위하여 음질 평가와 함께 청취자를 대상으로 주관적인 평가를 실시하였다. 실험 결과 \pm30{\circ}$의 정면 스피커를 배치한 돌비 표준 스피커 배치에서 38dB 이상의 분리도를 얻었으며, 전문가 그룹의 음의 확산감에 대한 주관 평가에서는 5점 평가를 기준으로 0.4∼0.5점, 음의 깊이감 평가에서는 0.1∼0.2점이 향상되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.107-108
• /
• 2006

ZnO is a promising material for UV or blue LEDs p-Type ZnO thin films which are imperative for the p-n junction of LEDs are difficult to achieve because of strong compensation of intrinsic defects such as zinc interstitial and oxygen vacancy. The method of codoping group three elements and group five elements is effective for the realization of p-type ZnO films. In this study, We codoped N and Al m ZnO thin films by RF magnetron sputtering and annealed the films in sputtering chamber. Some films showed p-type conductivity m Seeback effect measurement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.551-554
• /
• 2000

Alignment system is a system to locate an object to it's accurate position in multi-d.o.f space. According to process of application, it is need to align an object in 3 or 6 d.o.f. space. And alignment system is used in various environments. Especially in PDP application, alignment process is carried out in vaccume environment. In this paper, we developed 3 d.o.f. alignment system for vaccume environment, performed kinematic analysis and improved it's positional accuracy.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권8호
• /
• pp.1000-1003
• /
• 2014

There are 70 vertical and 70 horizontal correctors for Pohang Light Source. Until mid of 2000, power supplies for these correctors were based on 1990's technology, so the global orbit feedback system was not possible with poor 12 bit resolution. A new task force team was assembled to develop new power supplies with BESSY type DAC cards. After the project, two vertical correctors in each lattice were connected with new power supplies, and the global orbit feedback was available within the accuracy of 5 microns. However, this replacement was not enough to satisfy the beam stability requirement of 2 microns for PLS. We have launched another power supply design based on all digital technology. This attempt was completed within a year, and 80 units were assembled in house. Currently, the global orbit feedback system is running successfully with new digital power supplies and the compensation of chamber motion due to the thermal load by using digital displacement transducers attached on each BPMs.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1107-1116
• /
• 2004

In this paper, the effects of diverse parameters on the operation of loop heat pipe (LHP), such as particle diameter of sintered porous wick, wick porosity, vapor line diameter, thickness of wick and heating capacity were investigated by a theoretical analysis. A LHP has a wick only in its evaporator for the circulation of working fluid, and utilizes a porous wick structure of which pore size is very small to obtain a large capillary force. The working fluid is water and the material of sintered porous wick is copper. For these different parameters, capillary pressure, pressure drop in wick, pressure drops and temperature distribution were analyzed by a theoretical design method of LHP.

• 대한방사선치료학회지
• /
• 제9권1호
• /
• pp.87-93
• /
• 1997

The using of compensator is required to adjust the irregular dose distribution due to irregular thickness of the body in Total Body Irradiation. Aluminuim, copper or lead is generally used as compensator. In our study, we would like to introduce a result of the attenuation and compensation effect of radiation use compensator made by duralumin and its clinical use. The thickness of compensator was calculated by the attenustion of radiation, which was measured by polystyrene phantom and ionization chamber(farmer). The compensation effect of radiation was measured by diode detector. All of conditions were set as in real treatment, and the distanc from source to detector was 446 cm. We also made fixation of device to easily attach the compensator to LINAC. Beam spoiler was menufactured and placed on the patient to irradiate sufficient dose to the skin. diode detector were placed on head, neck, chest, umbilicus. pelvis and knee with each their entranced exit points, and datas of dose distribution were evaluated and compared in each points for eleven patients(Feb. 96-Feb. 97). The attenuation rate of irradiation by duralumin compensator was measured as $1.4\%$ in 2mm thickness. The mean attenuation rate was $1.3\%$ per 2mm as increasing the thickness gradually to 50 mm. By using duralunim compensator, dose distribution in each points of body was measured with ${\pm}2.8\%$ by diode detectior. We could easily calculate the thickness of compensator by measuring the attenuation rate of radiation, remarkably reduce the irragularity of dose distribution duo to the thickness of body and magnify the effect of radiation therapy.

• 한국음향학회지
• /
• 제21권3호
• /
• pp.245-255
• /
• 2002

5.1채널 스피커 시스템을 이용하여 음향을 재현시 나타나는 현상인 크로스토크를 제거하여 청취자에게 보다 입체적인 음을 재현하는 방법에 관한 것이다. 본 논문에서는 크로스토크를 제거하기 위하여 자유음장 모델을 사용하였다. 이것을 구현함에 있어 주파수 영역에서 심리음향에 기초한 바크 스케일 (bark scale)을 사용한 복소이득 보상을 실시하였으며, 서라운드 채널에 관해서는 밴드패스 필터를 추가하여 주파수 제한적인 음질 보상을 실시하였다. 정면 채널과 서라운드채널의 음원을 제작하여 기존의 2채널 및 5.1 시스템에서 제시하는 음원과 비교하여 객관적인 음질 평가 및 청취자를 대상으로 한 주관 평가를 실시하였다. 제안된 방법에 따라 측정한 결과에 따르면 ±30°의 정면 스피커를 배치한 돌비 표준 스피커 배치에서 38 dB이상의 분리도를 얻었으며 확산감에 대해 전문가를 대상으로 한 주관 평가는 5점 평가를 기준으로 0.4점이 향상되었다.

• 한국멀티미디어학회논문지
• /
• 제21권9호
• /
• pp.1076-1089
• /
• 2018

Respiration is the process of moving air into and out of the lung. Respiration changes the temperature in the chamber while exchanging energy. Especially the temperature of the face. Respiration monitoring using an infrared camera measures the temperature change caused by breathing. The conventional method assumes that motion is not considered and measures respiration. These assumptions can not accurately measure the respiration rate when breathing moves. In addition, the respiration rate measurement is performed by counting the number of peaks of the breathing waveform by displaying the position of the peak in a specific window, and there is a disadvantage that the breathing rate can not be measured accurately. In this paper, we use KLT tracking and block matching to calibrate limited weak movements during breathing and extract respiration waveform. In order to increase the accuracy of the respiration rate, the position of the peak used in the breath calculation is calculated by converting from a single point to a high resolution. Through this process, the respiration signal could be extracted even in weak motion, and the respiration rate could be measured robustly even in various time windows.

• 대한전자공학회논문지SP
• /
• 제41권2호
• /
• pp.99-108
• /
• 2004

5.1채널 스피커 시스템을 이용하여 음향을 재현 시 나타나는 현상인 크로스토크를 제거하여 청취자에게 보다 입체적인 음을 재현하는 방법에 관한 것이다. 본 논문에서는 자유음장 모델에 기초하여 5.1채널 스피커 시스템의 보상함수를 해석, 이를 심리음향에 기초한 바크 스케일(bark scale) 등가 보상 밴드패스 필터에 적용하여 주파수 제한적인 음질 보상을 실시하였다. 정면 채널과 서라운드 채널의 음원을 제작하여 기존의 2채널 및 5.1 시스템에서 제시하는 음원과 비교하여 객관적인 음질평가 및 청취자를 대상으로 한 주관 평가를 실시하였다. 제안된 방법에 따라 측정한 결과에 따르면 ±30。의 정면 스피커를 배치한 돌비 표준 스피커 배치에서 38㏈ 이상의 분리도를 얻었으며 확산감에 대해 전문가를 대상으로 한 주관 평가는 5점 평가를 기준으로 0.4점이 향상되었다.