• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권2호
• /
• pp.97-103
• /
• 2005

Most car navigation systems(CNS) estimate the vehicle's location using global positioning system(GPS) or dead reckoning(DR) system. However, the estimated location has undesirable errors because of various noise sources such as unpredictable GPS noises. As a result, the measured position is not lying on the road, although the vehicle is known to be restricted on the road network. The purpose of map matching is to locate the vehicle's position on the road network where the vehicle is most likely to be positioned. In this paper, we analyze some general map matching algorithms first. Then, we propose a map matching method using compensation vectors to improve the performance of map matching. The proposed method calculates a compensation vector from the discrepancy between a measured position and an estimated position. The compensation vector and a newly measured position are to be used to determine the next estimation. To show the performance improvement of the map matching using compensation vectors, the real time map matching experiments are performed. The real road experiments demonstrate the effectiveness and applicability of the proposed map matching.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권10호
• /
• pp.2448-2463
• /
• 2013

The traditional block-based motion compensation methods in frame rate up-conversion (FRUC) only use a single uniquely motion vector field. However, there will always be some mistakes in the motion vector field whether the advanced motion estimation (ME) and motion vector analysis (MA) algorithms are performed or not. Once the motion vector field has many mistakes, the quality of the interpolated frame is severely affected. In order to solve the problem, this paper proposes a novel joint overlapped block motion compensation method (8J-OBMC) which adopts motion vectors of the interpolated block and its 8-neighbor blocks to jointly interpolate the target block. Since the smoothness of motion filed makes the motion vectors of 8-neighbor blocks around the interpolated block quite close to the true motion vector of the interpolated block, the proposed compensation algorithm has the better fault-tolerant capability than traditional ones. Besides, the annoying blocking artifacts can also be effectively suppressed by using overlapped blocks. Experimental results show that the proposed method is not only robust to motion vectors estimated wrongly, but also can to reduce blocking artifacts in comparison with existing popular compensation methods.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.96-108
• /
• 1996

In this paper, we propose an object-oriented coding method in low bit-rate channels using block-based motion vectors and residual image compensation. First, we use a 2-stage algorithm for estimating motion parameters. In the first stage, coarse motion parameters are estimated by fitting block-based motion vectors and in the second stage, the estimated motion parametes are refined by the gradient method using an image reconstructed by motion vectors detected in the first stage. Local error of a 6-parameter model is compensted by blockwise motion parameter correction using residual image. Finally, model failure (MF) region is reconstructed by a fractal mapping method. Computer simulation resutls show that the proposed method gives better performance than the conventional ones in terms of th epeak signal to noise ratio (PSNR) and compression ratio (CR).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.187-192
• /
• 1993

Thermal deformation causes large amount of machine tool errors. In order to compensate for thermal and geometric errors of the machine tool an off-line geometric adaptive control (GAC) scheme was developed. THe GAC method was realized by using a measuring plate made of precision spheres. Error vectors and volumetric errors were measured by the measuring plate. Error compensation models were obtained from error vectors and a kinematic chain of machine tools. Reliability of the GAC system of thermal and geometric errors were confrimed by large amount of experiments.

• 방송공학회논문지
• /
• 제7권3호
• /
• pp.238-247
• /
• 2002

본 논문에서는 객체 단위 스테레오 동영상을 변이-움직임 벡터의 상관관계를 이용하여 부호화 방식을 제안한다. 시간적으로 연속되는 스테레오 동영상에서의 객체를 MPEG-4와 같이 VOP 단위로 구성하고, 이전 시간에서 한 쌍의 VOP에 대한 변이 벡터와 현재 시간에서 좌ㆍ우 VOP에 대한 움직임 벡터를 블록 정합 방식으로 구한다. 그리고 나머지 한 개의 변이 벡터는 위에서 구한 벡터들을 가지고 변이-움직임 벡터의 상관관계를 이용하여 별도의 추정과정 없이 구한다. 그리고 보다 신뢰성 있는 벡터를 구하기 위해 각각 구한 변이와 움직임 벡터에 평활화를 수행한다. 이러한 기법을 스테레오 동영상 부호화에서 대부분의 부호화 방식인 B-VOP 예측부호화에 적용하였고 B-YOP 변이 보상시 변이-움직임 벡터의 상관관계를 이용하여 3개의 참조 VOP를 가지고 보상함으로써 화질을 기존 방식에 비해 향상시킬 수 있었다.

• 대한전자공학회논문지SP
• /
• 제44권6호
• /
• pp.47-53
• /
• 2007

블록 기반 프레임 레이트 변환 (frame-rate conversion) 또는 필름 떨림 보상 (film judder compensation)을 수행하기 위해서는 참 움직임 벡터(true motion vector)를 찾아야 한다. 이를 위해서 현재 블록의 공간적 및 시간적 상관성을 최대로 하여 시각적으로 덜 부자연스럽게 느끼도록 하는 방법들이 연구되었다. 그러나 기존의 블록단위 절대값 차이의 합 (SAD)만으로는 비정형성 객체의 움직임 에러를 추정할 수 없었다. 본 논문에서는 비정형성 객체가 등속운동을 하는 경우 재귀적으로 기존의 움직임을 유지하도록 하는 방법을 제안하였다. 현재 블록의 등속움직임 추정값을 재귀평균으로 구하였으며 현재 블록 벡터의 신뢰도를 계산하여 원래의 움직임 벡터와 재귀평균 움직임 벡터중에서 가중치를 두도록 하였다. 실험결과 비정형성 등속운동 객체의 움직임을 블록기반으로 추정함을 확인할 수 있었다.

• 전자공학회논문지S
• /
• 제36S권12호
• /
• pp.85-96
• /
• 1999

많은 경우의 예측 비디오 압축 표준에서는, BMA에 의해 매크로 블록당 하나의 움직임 벡터가 계산되는 방식인 BMC방식이 널리 사용되고 있다. 그러나 BMC에 의해 예측된 움직임 벡터 필드는 블록당 하나의 움직임 벡터를 사용하기 때문에 불연속적이며, 불연속적인 움직임 벡터 필드로 인해 블록화 현상을 나타낸다. 따라서 이를 제거하는 효과적인 방법은 움직임 벡터 필드를 평활화(smoothing)하는 방법일 것이다. 최적 평활화 과정은 비디오 시퀀스의 움직임 종류에 따라 다를 것이다. 본 논문에서는 움직임 벡터를 평활화하는 몇 개의 방법들을 고려할 것이다. 어떠한 방법이든 BMA로 구한 움직임 벡터는 더 이상 최적화된 움직임 벡터가 아닐 것이므로, BFD(displaced frame difference)의 놈(norm)을 최소화하는 최적 움직임 벡터를 찾아야 한다. 본 논문에서는 conjugate gradient 알고리즘을 사용하여 DFD의 놈을 최소화하는 최적움직임 벡터를 찾는 통합 알고리즘을 제안한다. 이 통합 알고리즘은 ATMC(affine transform based motion compensation), BTMC(bilinear transform based motion compensation), 그리고 본 논문에서 제안하는 FMC(filtered motion compensation)의 세가지 방식에 대하여 적용되고 BMC에 대비해서 평가되어 졌다.

• 전자공학회논문지B
• /
• 제31B권10호
• /
• pp.99-111
• /
• 1994

A motion picture compression scheme using subband coding with motion compensation is presneted in this paper. A hierarchical subband decomposition is used to split the image signal into 10 subbands with a 3-layer pyramid structure and motion compensation is used in each band. However, in this case, motion vector information is drastically increased; therefore, initial motion vectors are estimated in the highest pyramid and motion vectors are refined using the reconsructed subband signal in each layer. Simulation results show that the proposed method compares favorably in terms of prediction error energy and side informatio with methods requiring additional information. Images recostructed from the proposed method show good quality compared to those reconstructed using blockwise DCT.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.195-198
• /
• 2003

The accuracy of automatic speech recognition system depends on the presence of background noise and speaker variability such as sex, intonation of speech, and speaking rate. Specially, the speaking rate of both inter-speaker and intra-speaker is a serious cause of mis-recognition. In this paper, we propose the compensation method of the speaking rate by the ratio of each vowel's length in a phrase. First the number of feature vectors in a phrase is estimated by the information of speaking rate. Second, the estimated number of feature vectors is assigned to each syllable of the phrase according to the ratio of its vowel length. Finally, the process of feature vector extraction is operated by the number that assigned to each syllable in the phrase. As a result the accuracy of automatic speech recognition was improved using the proposed compensation method of the speaking rate.

• 한국정밀공학회지
• /
• 제11권4호
• /
• pp.158-164
• /
• 1994

A volumetric error compensation method was stueide with measuring systematic error of a Coordinate Measuring Machine(CMM). The volumetric error equations were proposed for a Moving Bridge type CMM. Using the error equations, error vectors in the measuring volume were corrected by a software method. The CMM was controlled by the compensation program separately in the measuring and moving function of the CMM proving. The linear accuracy of the CMM was measured by the Laser Interferometer and compared with the data before the volumetric error compensation. This method was proved as low cost and effective to reduce the systematic error of the CMM, as no hardware modification is required.