• Journal of Power Electronics
• /
• v.9 no.5
• /
• pp.791-799
• /
• 2009

This paper presents a time-varying sinusoidal disturbance compensation method (based on an adaptive estimation scheme) for induction motor drives fed by a matrix converter. In previous disturbance accommodation methods, sinusoidal disturbances with unknown time-invariant frequencies have been considered. However, in the new method proposed here, disturbances with unknown time-varying frequencies are considered. The disturbances can be estimated by using a disturbance accommodating observer, and an additional control input is added to the induction machine drive. The stability analysis is carried out considering the disturbance estimation error and simulation results are shown to illustrate the performance of the proposed solution.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.12
• /
• pp.1101-1104
• /
• 2008

We have studied electro-optic characteristics to improve viewing angle of the in-plain switching (IPS) liquid crystal display using an compensation film. The IPS mode shows relatively large light leakage and color shift in diagonal directions in a dark state. To solve this problem, we have compensated the low contrast ratio in diagonal directions using one optimized discotic film and adjusting TAC films of polarizers. The compensated IPS mode shows wide viewing angle characteristics that region of CR 50:1 is over $60^{\circ}$ of polar angle in all directions. The optimized IPS cell exhibits much better performances than other methods do in terms of CR and color uniformity.

• Korean Business Review
• /
• v.22 no.1
• /
• pp.27-44
• /
• 2009

This paper compares the accounting standards for stock option of Japan and Korea. Especially, tire setting process of accounting standards for stock option, accounting methods and disclosures for stock option in two countries are analyzed. The results provide that two countries shaw different characteristics in accounting standards for stock option. First, in Japan, acquired services are reported as compensation costs and capital adjustments. On the other hand, in Korea, in case of cash-settled share- based payment transactions, acquired services are reported as compensation costs and capital adjustments, but in case of equity-settled share- based payment transactions, acquired services are reported as compensation costs and debt. Second, when tire stock option rights are abandoned, they are reported as extraordinary items in Japan and are reported as other surplus in Korea. Third, though both countries do not choose specific stock option pricing model, Japan prefers Black-Sholes Model and Korea regards binomial model as proper model.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.9-11
• /
• 2002

This paper proposes a percentage current differential relaying algorithm for bus protection using an advanced compensation algorithm of the secondary current of CTs. A percentage current differential relaying algorithm may maloperate in case of external faults with CT saturation. Thus, it needs an additional method to cope with CT saturation. The advanced compensation algorithm is unaffected by a remanent flux. The proposed relaying algorithm does not need any additional methods for CT saturation and is unaffected by the remanent flux and has the wide operating zone of current differential relays.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.4
• /
• pp.92-97
• /
• 2006

This paper presents an integrated machining error compensation method based on PNN(Polynomial Neural Network) approach and inspection database of OMM(On-Machine-Measurement) system. To efficiently analyze the machining errors, two machining error parameters are defined and modeled using the PNN approach, which is used to determine machining errors for the considered cutting conditions. Experiments are carried out to validate the approaches proposed in this paper. In result, the proposed methods can be effectively implemented in a real machining situation, producing much fewer errors.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.10
• /
• pp.99-111
• /
• 1994

A motion picture compression scheme using subband coding with motion compensation is presneted in this paper. A hierarchical subband decomposition is used to split the image signal into 10 subbands with a 3-layer pyramid structure and motion compensation is used in each band. However, in this case, motion vector information is drastically increased; therefore, initial motion vectors are estimated in the highest pyramid and motion vectors are refined using the reconsructed subband signal in each layer. Simulation results show that the proposed method compares favorably in terms of prediction error energy and side informatio with methods requiring additional information. Images recostructed from the proposed method show good quality compared to those reconstructed using blockwise DCT.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.38-40
• /
• 2007

In this paper, we propose a novel architecture, which is based on DCT (Discrete Cosine Transform), for ME (Motion Estimation) and MC (Motion Compensation). The traditional algorithms of ME and MC based on DCT did not suffer the advantage of the coarseness of the 2-dimensional DCT (2-D DCT) coefficients to reduce the operational time. Therefore, we derive a recursion equation for transform-domain ME and MC and design the structure by using highly regular, parallel, and pipeline processing elements. The main difference with others is removing the IDCT block by using to transform domain. Therefore, the performance of our algorithm is more efficient in practical image processing such as DVR (Digital Video Recorder) system. We present the simulation result which is compare with the spatial domain methods. it shows reducing the calculation cost. compression ratio. and peak signal to noise ratio (PSNR).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.1
• /
• pp.29-37
• /
• 2012

A simple and effective dead time compensation scheme for a PWM inverter-fed permanent magnet synchronous motor (PMSM) drive using the model reference adaptive control (MRAC) and coordinate transformation is presented. The basic concept is to first transform a time-varying disturbance caused by the dead time and inverter nonlinearity into unknown constant or slowly-varying one by the coordinate transformation, and then use the MRAC design technique to estimate this parameter in the stationary reference frame. Since the MRAC scheme is a suitable way of estimating such a parameter, the control performance can be significantly improved as compared with the conventional observer-based method tracking time-varying parameters. In the proposed scheme, the disturbance voltage caused by the dead time is effectively estimated and compensated by on-line basis without any additional circuits nor existing disadvantages as in the conventional methods. The asymptotic stability is proved and the effectiveness of the proposed scheme is verified.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2004

Thermal distortion is a critical issue in machine tools, especially in high speed machining. This is the reason why recent machine tools have thermal compensation function. To compensate thermal distortion, it is necessary to make a model that has some relationship between temperature and deformation. Various experimental methods ye widely been used in thermal test: constant spindle speed, unit step speed increase, random spindle speed, etc. This paper focuses on which type of spindle operation condition is good for thermal experiment. Also, experimental data is modeled using multiple linear regression models and compared each other to select a method. Consequently, it turned out at e condition of 75％ constant of maximum spindle speed is good enough to generate temperature and distortion data.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.581-582
• /
• 2006

This paper presents an integrated machining error compensation method based on PNN(Polynomial Neural Network) approach and inspection database of OMM(On-Machine-Measurement) system. To efficiently analyze the machining errors, two machining error parameters are defined and modeled using the PNN approach, which is used to determine machining errors for the considered cutting conditions. Experiments are carried out to validate the approaches proposed in this paper. In result, the proposed methods can be effectively implemented in a real machining situation, producing much fewer errors.