• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.107-115
• /
• 2011

The purpose of the study is to analyze the environmental characteristics of fish acute toxicity that is dependent on the harmfulness of ACQ (Alkaline Copper Quat)-Treated Wood and Oryzias latipes mortality in a comprehensive way, provide objective verification method on the eco-toxicity and environment-friendliness of landscaping materials and methods, and utilize it as a basic datum for evaluation criteria. The main results are summarized as follows : 1. As a result of analysis on the harmfulness characteristics, each experimental plot showed different values respectively. In particular, it has been found that in proportion to the volume of testing materials, COD and Cu increases at a constant rate, compared to the input water. In the plot C with three testing materials, COD increased 67 times more than that of the input water, and Cu increased up to 12.36mg/L. 2. In case of fish toxicity, plot C, B, A all showed a mortality rate of 100%, indicating that fish toxicity is strong. In particular, the mortality rate of each plot within the initial time of one and a half hour showed clearly, which suggests that the fish toxicity is influenced by the increased concentration of hazardous substances depending on the volume ratio of testing materials. 3. As a result of comparison and analysis on the harmfulness and fish toxicity, the harmfulness showed different values on each experimental plot but, we found that the changing rate of values of toxicity of COD and Cu is mutually similar to that of mortality in the initial hour according to the experiment of fish toxicity, which shows that COD and Cu are major factors to increase fish toxicity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.533-533
• /
• 2007

The stress effect of SiGe p-type metal oxide semiconductors field effect transistors(MOSFETs) has been investigated to compare device properties using Si bulk and partially depleted silicon on insulator(PD SOI). The electrical properties in SiGe PD SOI presented enhancements in subthreshold slope and drain induced barrier lowering in comparison to SiGe bulk. The reliability of gate oxides on bulk Si and PD SOI has been evaluated using constant voltage stressing to investigate their breakdown (~ 8.5 V) characteristics. Gate leakage was monitored as a function of voltage stressing time to understand the breakdown phenomena for both structures. Stress induced leakage currents are obtained from I-V measurements at specified stress intervals. The 1/f noise was observed to follow the typical $1/f^{\gamma}$ (${\gamma}\;=\;1$) in SiGe bulk devices, but the abnormal behavior ${\gamma}\;=\;2$ in SiGe PD SOI. The difference of noise frequency exponent is mainly attributed to traps at silicon oxide interfaces. We will discuss stress induced instability in conjunction with the 1/f noise characteristics in detail.

• Geomechanics and Engineering
• /
• v.6 no.2
• /
• pp.173-194
• /
• 2014

Laboratory and field data showed that deep mixed (DM) columns accelerated the rate of consolidation of the soft foundations. Most analyses of consolidation of DM column-improved foundations so far have been based on the elastic theory. In reality, the DM columns may yield due to the stress concentration from the soft soil and its limited strength. The influence of column yielding on the degree of consolidation of the soft foundation improved by DM columns has not been well investigated. A three-dimensional mechanically and hydraulically-coupled numerical method was adopted in this study to investigate the degree of consolidation of the DM column foundation considering column yielding. A unit cell model was used, in which the soil was modeled as a linearly elastic material. For a comparison purpose, the DM column was modeled as an elastic or elastic-plastic material. This study examined the aspects of stress transfer, settlement, and degree of consolidation of the foundations without or with the consideration of the yielding of the DM column. A parametric study was conducted to investigate the influence of the column yielding on the stress concentration ratio, settlement, and average degree of consolidation of the DM column foundation. The stress concentration ratio increased and then decreased to reach a constant value with the increase of the column modulus and time. A simplified method was proposed to calculate the maximum stress concentration ratios under undrained and drained conditions considering the column yielding. The simplified method based on a composite foundation concept could conservatively estimate the consolidation settlement. An increase of the column modulus, area replacement ratio, and/or column permeability increased the rate of consolidation.

• Journal of People, Plants, and Environment
• /
• v.21 no.6
• /
• pp.533-543
• /
• 2018

This study aimed to examine how the horticultural therapy that was originated in the US has influenced South Korea and Japan and developed in the two countries as an interim check to promote qualitative growth of horticultural therapy with the growing social attention. It also aimed to look into the background of how horticultural therapy was introduced in Japan (which introduced horticultural therapy around the same time as Korea), and the process of the introduction, and compare them with those of Korea in order to set the direction for horticultural therapy. Data was collected to prepare the chronological table of horticultural therapy in Korea and Japan and investigate the flow. Interviews were conducted with the professors who first opened a horticultural therapy course in university so as to determine the introduction background. The analysis results are summarized as follows: Horticultural therapy was created to give mental comfort and emotional purification to those concerned with horticulture that had concerns over social phenomena. In Korea, there had been a process of finding a way of getting mental comfort and emotional purification in the economic slowdown in the late 1990s. Since 2001, there have been more attention and demand for horticultural therapy. As a result, there has been a tendency of studying general horticultural welfare activities and professional horticultural therapy separately. In Japan, the environmental pollution that has arisen since 1970s led to a concern over social orientation in the relation between plants and humans. The academic conference of global researchers to establish the horticultural therapy studies influenced the introduction of horticultural therapy in Korea and Japan. Both countries had no operations and system, and developed them independently. They had similar directions to seek, such as the department of horticultural therapy, need for professional education, active introduction of hospital practice (internship), and security of operating budget. Horticultural therapy has many competencies and thus requires constant research and expansion.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.291-297
• /
• 2009

Relaxation of high strength bolts was investigated. Block type and splice type specimens were fabricated with different types of bolts and different clamping lengths. Bolts were tightened to the specified torque. Clamping forces were measured through strain gauges installed on the shafts of bolts, while specimens were kept in a constant temperature and humidity. In all cases, ratio of clamping force reduction is less than 10%. Test results of different types of specimens and bolts and different clamping lengths were compared each other by using a simple model, which is suggested in this study for the estimation of bolt relaxation. The suggested model shows reasonably good agreements with test results for all cases. No difference is found between F13T and F10T bolts, but Dacro coated bolts shows higher relaxation than black bolts by approx. 30%. And also the comparison of test results shows that ratios of bolt relaxation become larger as clamping lengths of bolt shorter and the number of faying surfaces greater.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.11-19
• /
• 2006

The purpose of this study was to compare and evaluate the shaping abilities of various hybrid instrumentation method using constant tapered file systems with $ProTaper\^{(R)}$ S1 and the difference between experts and inexperienced clinicians in use of NiTi file. Three hybrid methods used in this study were composed of $ProTaper\^{(R)}\;S1\;and\;K-Flexofile\^{(R)}\;(group S),\;ProTaper\^{(R)}\;S1\;and\;HeroShaper\^{(R)}\;(group\;H),\;and\;ProTaper\^{(R)}\;S1\;and\;ProFile\^{(R)}\;(group\;P)$respectively. The $ProTaper\^{(R)}$-alone method (group C) was introduced as a control group. After canal preparation, the lapse of time was recorded. The images of pre- and post-operative canal were scanned and superimposed. Amounts of instrumented canal widths and centering ratio were measured at apical 1, 2 and 3 mm levels and statistical analysis was performed In this study. both of the group C and S took more time to prepare canals than other groups, Inexperienced operators required more time for the entire preparation with the groups C and H than the experienced (p<0.05). And the centering ratio of group P were preferable to $ProTaper\^{(R)}$-alone method or the hybrid technique using stainless steel files. As such, within experienced operators, group H also showed better results in addition to the group P. Under these condition, the hybrid methods of each the $ProFile^{(R)}$ system and $HeroShaper^{(R)}$ with ProTaper are recommendable comparative to $ProTaper\^{(R)}$-alone method. According to the results, the hybrid instrumentation method is a more appropriate method of canal preparation than single file system for narrow or curved canals.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.847-854
• /
• 2003

In general cooked rice would be used as a major raw material for making Takju. In this case quality, taste and storage time of Takju were not fully satisfied. Fermentation conditions for Takiu mash were examined by using the germed brown rice in this study. In case of the germed brown rice on 2nd stage mash, alcohol was slowly generated in comparison with the cooked rice. Reducing sugar was slowly produced and the amount of reducing sugar was low. The sugar content was created at a uniform rate. The pH was shown to be higher in mash of the germed brown rice than that of the cooked rice. Acidity change showed a similar inclination to pH change. The degree of yeast growth on the mash of the germed brown rice was revealed to be slightly lower than that of the cooked rice. Temperature of mash was kept to be constant after 3 days from fermentation. Fusel oil produced from the mash of the germed brown rice was less gernerated in comparison with the cooked rice. Amount of amino acid in case of the germed brown rice was indicated to be higher. Takju made with the germed brown rice was shown to be 1.3 times in overall taste, 1.5 times in refreshing as compared with Takju made with the cooked rice. However there are no differences between them in flavor and color of Takju. In overall acceptance Takju made with the germed brown rice was shown to be 1.3 times as compared with Takju made with the cooked rice. In conclusion the germed brown rice was expected to be able to be better in Takju quality.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.295-303
• /
• 2018

The stereo camera system has a fixed baseline and therefore has a constant scale. However, it is difficult to measure the actual three-dimensional coordinate since the scale is not fixed when relative orientation parameters are determined through the key-point matching in the stereo image each time. Therefore, the purpose of this study was to perform the stereo camera calibration that simultaneously determines the internal characteristics of the left and right cameras and the camera relationship between them using the modified collinearity equation and compared it with the two independent single cameras calibration. In the experiment using the images taken at close range, the RMSE (Root Mean Square Error) of ${\pm}0.014m$ was occurred when the three dimensional distances were compared in the single calibration results. On the other hand, the accuracy of the three-dimensional distance of the stereo camera calibration was better because the stereo camera results were almost no error compared to the results from two single cameras. In the comparison of the epipolar images, the RMSE of the stereo camera was 0.3 pixel more than that of the two single cameras, but the effect was not significant.

• Clean Technology
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2004

In this study, the performance of Aluminium foil etching waste(PWF100) as a cohesive agent was estimated and the methods to commercialize it were investigated through comparison of physical properties between Aluminium foil etching waste(PWF100) and commercial cohesive agent(PAC17). The height of sediment bed was measured according ot the change of the concentration of BKN-100, BKR-110, and BKR-120 prepared by using PWF100. When the concentrations of BKN-100, BKR-110, and BKR-120 were increased, the heights of sediment bed were constant after decreased. Also, the density of sediment bed was investigated according to the change of the concentration of BKN-100. When the concentrations of BKN-100 were increased, the densities of sediment bed were decreased. In addition, based on the concentration of BKN-100, BKR-110, and BKR-120, the sediment rate was experimented. When the concentrations of BKN-100, BKR-110, and BKR-120 were increased, sediment rates were rapid and then slow. Moreover, the volumes of sediment bed were measured according to the change of the concentration of BKN-100. According to increasing the concentrations of BKN-100, the required time for getting to the minimum volume of sedment bed were reduced and then increased. Lastly, the required time for sedimentation based on the concentration of BKN-100, BKR-110, and BKR-120 was investigated. When the concentrations of BKN-100, BKR-110, and BKR-120 were increased, the required times for sedimentation were increased after decreased. From these results, it can be concluded that the PWF100 acts as a cohesive agent.

• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.519-536
• /
• 2008

The relatively tranquil area within the Gogunsan Archipelago was for the first time investigated preliminarily with respect to modern sedimentological processes in association with the emplacement of the Saemangeum Dyke. Basic sedimentological observations, bathymetry and surface sediments were performed twice during 2006-2008 to compare the results and elaborate changes during that period of time. In addition, sediment dynamical observations were carried out with latest measuring equipment along two transects crossing the entrances of the archipelago, including 12-hour onboard measurements of current, suspended sediments, temperature, and salinity. This dataset was used to reveal hydrodynamic characteristics for spring season April-May and to estimate the direction and relative magnitude of the net flux of suspended sediments. There occurred three depositional areas (A to C) within the archipelago, where sediment texture was also changed. In area A, around Yami Island and the dyke, and area B, in the center of the archipelago, surface sediments became coarsened over the two-year period; sand content increased 5% at the expense of silt content in the former, whereas silt content increased 3% at the expense of clay content in the latter. By comparison, area C in the western entrance of the archipelago shows a textural trend of fining with more silt and clay (combined increase of 5%) at the expense of sand content. The accumulation of sediments in areas A and B is attributable to the sand and silt resuspended from the seabed sediments off sector 4 of the dyke during the winter. The origin of the fine materials depositing on area C is uncertain at present, although suspended sediments moving offshore around the archipelago may be one of the most likely candidates for the source. The temperature of seawater increased rapidly from $9-10^{\circ}C$ in April to $14-16^{\circ}C$ in May, whereas salinity remained more or less constant at 31-32%o during the two months. Both of these parameters showed little variations with depth through a tidal cycle, suggesting good mixing of seawater without any help of significant waves. The consistency of salinity during a tidal cycle also indicates no insignificant effects of freshwater from the rivers Mangyung and Donjin emitting through the opening gap near Sinsi Island. The suspended sediment concentrations were higher at the entrance between Sunyu and Sinsi islands than at the entrance between Hoenggyong and Sinsi islands, ranging from 20 and 30 mg/l and from 5 and 15 mg/l, respectively at the sea surface. Although tidal currents were variable across a transect between Sunyu and Sinsi islands, the currents across the entrance between Hoenggyong and Sinsi islands flowed consistently in the same direction all over the transect during a tidal cycle. The estimation of net flux of suspended sediments indicates that suspended sediments are transferred to the Gogunsan Archipelago mainly through a relatively deep trough adjacent to Sinsi Island toward the shallow area around Yami Island and the dyke.