• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.154-156
• /
• 2017

종래에는 등분산 가정을 기반으로 가속열화시험 데이터로부터 저장수명을 예측하는 방식이 일반적이었다. 그러나, 실제로는 대부분의 탄약류의 특성치 데이터는 시간의 경과에 따라 산포가 증가한다. 따라서, 본 연구에서는 등분산과 이분산을 가정한 경우에 저장수명 예측 결과의 차이를 확인하고 향후 이분산 가정을 기반으로 데이터 분석을 수행함이 타당함을 제안한다.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.461-465
• /
• 2010

This paper describes the design method of Time-to-Digital Converter(TDC) to obtain the constant delay time and good reliability. The reliability property is described with delay elements. In TDC the time signal is converted to digital value which is based on delay elements for the time interpolation. To obtain the constant delay time, the first and the last delay elements have different structure compared to the middle delay elements. In the first and the last delay elements, the driving ability could be controlled for the different delay time. The delay element can be designed by analog and digital devices. The delay time of the element using analog devices is not sensitive to process parameters than that of the element using digital devices. And the TDC circuit by the elements using analog devices shows better reliability than that by the elements using digital devices also.

• 한국전자거래학회지
• /
• 제18권1호
• /
• pp.165-189
• /
• 2013

개념적 모델링은 성공적인 비즈니스 정보 시스템을 개발하기 위한 중요한 활동이다. 본 연구의 목적은 개념적 모델링 활동에 있어서 근거연구로부터 도입한 지속비교 방법을 적용하는 것에 관한 가능성을 평가하는 것이다. 이를 알아보기 위해, 우리는 초심 모델러를 훈련시키고 두 그룹으로 나누어 사후 평가를 실시했다. 실험 결과는 지속비교 방법을 훈련받고 이를 적용한 그룹이 그렇지 않은 그룹보다 경험이 많은 모델러에게 더 호의적인 평가를 받는다는 점을 보여주었다. 더욱이, 통제 그룹은 도메인 지식에 대해 덜 친숙할수록 문제해결에 어려움을 겪었지만, 실험 그룹은 어려움에 더 잘 대처했다. 또한 지속비교 방법의 적용은 개념적 모델링의 분석 시간을 단축시켰다.

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1935-1940
• /
• 2016

본 논문에서는 RC 시정수 회로를 포함하는 비교기를 이용해 보조 전하펌프를 제어하여 루프 필터 출력 전압 변동 폭을 최소화 하는 위상고정루프(PLL)를 제안하였다. 루프 필터의 출력 전압변화는 작은 시정수 값을 가지는 RC와 큰 시정수 값을 가지는 RC를 통해 비교기의 입력으로 각각 전달된다. 작은 시정수를 가지는 RC는 루프 필터의 신호의 변화를 빠르게 전달하는 반면 큰 시정수를 가지는 RC는 루프 필터의 신호를 매우 느리게 전달하여 일정한 크기의 전압과 같이 동작한다. 비교기의 출력 신호는 보조 전하펌프를 제어하고, 이는 전압제어발진기(VCO)의 입력 전압 변동 폭을 줄여준다. 그러므로 제안한 위상고정루프는 위상 잡음이 많이 제거된 신호를 생성한다. 제안된 위상고정 루프는 1.8V의 공급전압에서 0.18um CMOS 공정의 파라미터를 이용하여 Hspice로 시뮬레이션을 수행하고, 동작을 검증하였다.

• 한국군사과학기술학회지
• /
• 제21권2호
• /
• pp.173-179
• /
• 2018

Estimating reliability of a non-repairable system using the degradation data, variance assumption such as homogeneity (constant) or heteroscedasticity (time-variant) could affect accuracy of reliability estimation. This paper showed reliability estimation and comparison results under normal conditions using accelerated degradation data obtained from destructive measurements, according to variance assumption of the data at each measurement time. Degradation data from three accelerated conditions with stress factors of temperature and humidity were used to estimate reliability. The $B_{10}$ lifetime was estimated as 1243.8 years by constant variance assumption, and 18.9 years by time-variant variance. And variance assumption provided different analysis results of important stresses to reliability. Thus, accurate assumption of variance at each measurement time is required when estimating reliability using degradation data of a non-repairable system.

• 한국자동차공학회논문집
• /
• 제3권5호
• /
• pp.122-134
• /
• 1995

The present study was investigated combustion characteristics of methane-air mixtures at stratified charge in a constant volume combustion chamber. The main results obtained from this study can be summarized as follows. In case of ${\phi}_s=1.0$, total burning times greatly affected rather than initial time of pressure increase and maximum combustion pressure. In case of ${\phi}_t=1.0$, initial time of pressure increase and total burning times were affected considerably in comparison with the case of ${\phi}_s=1.0$. Also, even the very lean mixture which total equivalence ratio is ${\phi}_t=0.69$(${\phi}_s=1.0$, ${\phi}_m=0.65$), by changing configuration of the critical passage-hole and using a stratified mixture, it is possible to decrease substantially the initial time of pressure increase. total burning times and NOx concentration without deteriorating combustion characteristics such as maximum combustion pressure, rate of heat release etc. in comparison with the use of single chamber(in case of ${\phi}=1.0$) only. Specifically, our trends were revealed remarkably in the case of Type D which is reduced a flame contact area of sub-chamber side of the passage-hole.

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.47-55
• /
• 2015

With using adaptive control of the resistance spot welding machine, the advantage on electrode life time for galvanized steels has been addressed. This study was aimed to evaluate the electrode life time of galvanized steels with applying the constant current control and the adaptive control resistance spot welding process for a comparison purpose. The growth in diameter of electrode face was similar for both the constant current and the adaptive control up to 2000 welds. The button diameter was decreased with weld numbers, however, sudden increase in button diameter with use of the adaptive control after 1500 welds was observed. The peak load was continuously decreased with increasing number of welds for both the constant current and the adaptive control. The current compensation during a weld was observed with using the adaptive control after 1800 welds since the ${\beta}$-peak on dynamic resistance curve was detected at later weld time. The current compensation with adaptive control during resistance spot welding enhanced the nugget diameter at the faying interface of steel sheets and improved the penetration to thinner steel sheet.

• 센서학회지
• /
• 제20권4호
• /
• pp.243-248
• /
• 2011

The purpose of this study is to develop a sensing system to measure the capacitance of a pre-developed engine oil deterioration detection sensor integrated with an oil filter. To measure the capacitance of engine oil in the sensor, it is used the way measuring the electric charging time in a capacitor by impressing DC volt. This method has merits on cost and signal stability. The measured capacitance is compensated by comparison with the one measured by an impedance analyzer. Also, using the dielectric constant gained by an impedance analyzer, the calculating equation of the dielectric constant of engine oil related with the currently developed sensor is decided. Finally, the degradation degree of engine oil is estimated according to the change rate of dielectric constant between green oil and used oil. The newly developed personal controller is to control a series of the processes.

• International Journal of Internet, Broadcasting and Communication
• /
• 제11권3호
• /
• pp.1-7
• /
• 2019

Previously, parallel computing was mainly used in areas requiring high computing performance, but nowadays, multicore CPUs and GPUs have become widespread, and parallel programming advantages can be obtained even in a PC environment. Various parallel programming frameworks using multicore CPUs such as OpenMP and PPL have been announced. Nvidia and AMD have developed parallel programming platforms and APIs for program developers to take advantage of multicore GPUs on their graphics cards. In this paper, we develop digital image transformation programs that runs on each of the major parallel programming frameworks, and measure the execution time. We analyze the characteristics of each framework through the execution time comparison. Also a constant K indicating the ratio of program execution time between different parallel computing environments is presented. Using this, it is possible to predict rough execution time without implementing a parallel program.

• Elastomers and Composites
• /
• 제33권4호
• /
• pp.274-280
• /
• 1998

가황반응에 대한 반응차수, 반응속도상수 및 활성화에너지, 가교결합에 의한 가교밀도 및 탄성상수를 동일한 가황시스템하에서 실리카와 카본블랙을 함유한 SBR/BR 블렌드에 대하여 조사하였다. 반응차수는 충전제 종류에 관계없이 1차 반응이었으며, 카본블랙이 첨가된 배합고무는 실리카가 첨가된 배합고무보다 반응속도가 빠르게 나타났다. 그러나 활성화에너지는 충전제 종류 및 고무 블렌드 조성에 관계없이 일정하게 나타났다. 가교밀도 및 탄성상수는 고무와 카본블랙간의 강한 상호작용으로 인해 카본블랙이 첨가된 조성물에서 높게 나타났다. 한편, 고무 블렌드중 부타디엔 고무 함량이 증가할수록 가교밀도 및 탄성상수는 감소하였다. 가황고무중 결합 황 함량 비교결과, 실리카가 첨가된 조성물중 일정한 결합 황 함량은 반응시작 후 20분 후에 나타났으나, 카본블랙이 첨가된 조성물은 10분 후에 나타났다. 또한 실리카가 첨가된 조성물은 카본블랙이 첨가된 조성물에 비해 반응 유도시간($t_2$) 및 최적 가황시간($t_{90}$)이 길게 나타났다.