• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.559-564
• /
• 2014

The development of photovoltaic-thermal (PVT) technology has been introduced in recent years specifically to increase PV efficiency. One of the characteristics of PV systems is that the electricity generation increases as the solar radiation increases whereas the efficiency decreases because of high surface temperatures. Using a photovoltaic-thermal system, the surface temperature can be decreased by capturing the excess heat and the efficiency can be increased due to these characteristics. In this paper, three cases are introduced : 1) PV_r as the reference case, 2) PVT_a, which uses air as a heat source, and 3) PVT_w, which uses water as a heat source. Experiments were performed, analyzed, and compared to examine the effect of the PVT type on the efficiency of the system. The results showed that ETC($%/^{\circ}C$) efficiency of the PVT cases was increased versus the reference case due to decreasing surface temperature. Total efficiencies, which are electrical efficiency and thermal efficiency, for each PVT are tested and found to be 12.22% for PV_r, 29.50% for PVT_a, and 68.74% for PVT_w.

• Journal of Technology Innovation
• /
• v.21 no.3
• /
• pp.41-72
• /
• 2013

In this study, a comparison has been made among the countries regarding recent ICT practices being performed based on the measures of relative efficiency and productivity growth that use multiple inputs and outputs. Efficiency measures a country's ICT performance relative to a benchmark at a given point of time and productivity measures a country's performance over a period of time. An output-oriented Data Envelopment Analysis and Malmquist Index has been used for comparison among 28 countries over the period 2008-2011 by incorporating 9 variables. The empirical findings disclose gross inefficiencies in national ICT practices, which show that there is room for enhancing output gains through increased efficiency in their operations. In addition, 13 countries have performed better than others in total factor productivity mainly because of their improvement in the underlying technological progress in ICT. For those technically inefficient countries, however, technical inefficiency may hamper the growth of total factor productivity of ICT practices.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.168-179
• /
• 2013

The critical point analysis(CA) and impedance matching analysis(IA) are performed and compared for a 4-coil magnetic resonance wireless power transfer system. Because the operating frequency splits at short distance while the efficiency drops drastically at long distance in this system, the optimization technique is needed for either a specific distance or efficiency at the fixed frequency. CA uses the critical point where shows maximum efficiency in the entire range and IA uses the impedance matching technique to achieve maximum efficiency at the specific distance. Comparison result shows that IA is more efficient than CA. Also, it shows one side matching has a tradeoff relationship comparing to both side matching. By using four spiral resonant coils, the analysis was experimentally verified. The measured data agreed well with the calculated data.

• Food Science of Animal Resources
• /
• v.42 no.1
• /
• pp.1-17
• /
• 2022

Lipids are one of the major macronutrients essential for adequate growth and maintenance of human health. Their structure is not only complex but also diverse, which makes systematic and holistic analyses challenging; consequently, little is known regarding the relationship between phenotype and mechanism of action. In recent years, rapid advancements have been made in the fields of lipidomics and bioinformatics. In comparison with traditional approaches, mass spectrometry-based lipidomics can rapidly identify as well as quantify >1,000 lipid species at the same time, facilitating comprehensive, robust analyses of lipids in tissues, cells, and body fluids. Accordingly, lipidomics is now being widely applied in various fields, particularly food and nutrition science. In this review, we discuss lipid classification, extraction techniques, and detection and analysis using lipidomics. We also cover how lipidomics is being used to assess food obtained from livestock and poultry. The information included herein should serve as a reference to determine how to characterize lipids in animal food samples, enhancing our understanding of the application of lipidomics in the field in animal husbandry.

• Journal of Integrative Natural Science
• /
• v.8 no.4
• /
• pp.293-304
• /
• 2015

This study examined the factors which have influence on the welfare facilities for the elderly and analyzes their efficiency. It investigated theoretical studies and preceding studies and divided the efficiency evaluation factors into input and output factors. Input factors included budget, the number of workers and clients and facility area and output factors were operation management, the number of clients, profitability and welfare for the elderly. To sum up the analysis results of evaluation factors of welfare facilities for the elderly, the analysis of relative importance of input showed that budget was most important. As a result of analyzing the relative importance among detailed items, balance sheet and professional manpower were highest. Input factors by facility types showed that the budget for utility facilities and living facilities were highest. In output factors, utility facilities and living facilities were highest in management systematization and welfare for the elderly, respectively. In efficiency evaluation, utility facilities for the elderly showed 100% of efficiency in CCR and BCC models. In welfare facilities for the elderly, while CCR model showed 100% of efficiency in facility types A, C, D, and F, the efficiency was low in facility B (79.89%), E (77.14%), and G (80.72%). In BCC model, facility E was low as 78.69%. In efficiency comparison between utility facilities and living facilities for the elderly welfare, the efficiency of utility facilities for the elderly welfare was higher. Therefore, this study investigated the efficiency of welfare facilities for the elderly as its main purpose and presented policy suggestions based on the research results as the alternative.

• The Korean Journal of Applied Statistics
• /
• v.19 no.3
• /
• pp.447-460
• /
• 2006

This paper develops a multiple comparison method for finding an optimal ordering of K geometric means of exponential parameters. This is based on the paired comparison experimental arrangement whose results can naturally be represented by a completely oriented graph. Introducing posterior preference probabilities and stochastic transitivity conditions to the graph, we obtain a new graphical model that yields criteria for the optimal ordering in the multiple comparison. Necessary theories involved in the method and some computational aspects are provided. Some numerical examples are given to illustrate the efficiency of the suggested method.

• Journal of The Korean Society of Integrative Medicine
• /
• v.11 no.1
• /
• pp.121-130
• /
• 2023

Purpose : This study aimed to investigate the effect of blood flow restriction exercise on ankle muscle strength and balance ability to achieve maximum efficiency with the same exercise intensity and time. Methods : Twenty-six adults are randomly assigned to experimental group (n=13) and comparison group (n=13). The experimental group performed ankle joint strength exercises with blood flow restriction applied while the comparison group performed ankle joint strength exercises without blood flow restriction applied three times a week for four weeks. The digital muscle measurement, Y-balance test, and Cumberland ankle instability tool were used to evaluate the subject's muscle strength, dynamic balance, and ankle instability index before and after the intervention. Results : In within-group comparison muscle strength, all the two groups showed significant improvements post intervention (p<.05). In between-group comparison, there was significant difference in the change of dorsiflexion, eversion strength pre and post intervention (p<.05). but plantarflexion was no significant difference between pre and post intervention in the group comparison (p>.05). In within-group comparison dynamic balance, all the two groups showed significant improvements post intervention (p<.05). In between-group comparison, there was no significant difference in the change of Y-balance score pre and post intervention (p>.05). In within-group comparison ankle instability index, all the two groups showed significant improvements post intervention (p<.05). In between-group comparison, there was no significant difference in the change of CAIT score pre and post intervention (p>.05). Conclusion : The results of this study show that ankle joint strength exercise improved the strength and balance ability of those complaining of chronic ankle instability, and ankle joint strength exercise applied with blood flow restriction was more effective in dorsiflexion and eversion strength exercise than ankle joint strength exercise without blood flow restriction.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.386-387
• /
• 2013

This paper provides a comparison of high power semiconductor devices in 5MW-class Permanent Magnet Synchronous Generator (PMSG) Medium Voltage (MV) wind turbines. High power semiconductor devices of IGBT module type, IGBT press-pack type, and IGCT of both 4.5kV and 6.5kV are considered in this paper. Benchmarking is performed based on neutral-point clamed 3-level back-to-back type voltage source converter supplied from grid voltage of 4160V. The feasible number of semiconductor devices in parallel is designed through the loss analysis considering both conduction and switching losses under the given operating conditions of 5MW-class PMSG wind turbines, particularly for the application in offshore wind farms. The loss analysis is confirmed through PLECS simulations. The comparison result shows that IGBT press-pack type semiconductor device has the highest efficiency and IGCT has the lowest cost factor considering the necessary auxiliary components.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.4
• /
• pp.306-317
• /
• 1993

In this study, a performance comparison of scroll compressor for various refrigerants(CFC-12, HCFC-22 and HFC-134a) has been numerically carried out. The thermodynamic properties have been calculated by using the recent experimental equations and the performance has been investigated qualitatively at the same geometric specifications and operating conditions of scroll compressor. The results are as follows; HFC-134a has the highest compression ratio of 5.40. The mass flow rate of HCFC-22, which affects the cooling capacity of refrigerant system, is higher than that of other refrigerants. HFC-134a has the highest adiabatic efficiency in comparison with CFC-12 and HCFC-22.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8719-8727
• /
• 2015

The purpose of this study is to examine the production efficiency of Rose farm and to explain the factors of the inefficiency. To analysis the production efficiency, SFA(Stochastic Frontier Analysis) and DEA(Data Envelopment Analysis) methods are measured, and then, Tobit regression model is used to analysis the influential factors on the production efficiency. As a result, first, the production efficiency by SFA is 88.4%, and by DEA, results are 78.5% and 85.2% in the CRS and VRS model, respectively. In particular, the production efficiency of the measurement results of the two methods are complementary, it is described in the same order of efficiency of each management body. Second, the results of tobit model shows that 6 input-factors are significant, and seed/nursery and material costs, which have the largest regression coefficient value and positive effect on production efficiency, are the most influential factors. Therefore, the results of this study indicates Rose farm can enhance their management efficiency by increasing amount of the seed/nursery and material costs.