• Asian-Australasian Journal of Animal Sciences
• /
• 제22권10호
• /
• pp.1366-1376
• /
• 2009

Effect of sulfur (S) on utilization efficiency of fresh cassava foliage and cassava hay in dairy cows was evaluated using thirty-two $1^{st}-2^{nd}$ lactation Holstein-Friesian crossbred dairy cows. The experimental treatment was a 2${\times}$2 factorial arrangement in a randomized complete block design (RCBD) using two roughages (rice straw+fresh cassava foliage (FCF) and rice straw+cassava hay (CH)) and two elemental sulfur (S) levels (0.15 and 0.4% S of dry matter (DM)), respectively. Four dietary treatments (FCF+0.15, FCF+0.4, CH+0.15 and CH+0.4) were offered ad libitum in the form of a total mixed ration (TMR) with concentrate to roughage (chopped rice straw+chopped cassava foliage) ratio at 60:40. Fresh cassava foliage or cassava hay resulted in similar dry mater intake, rumen ecology parameters, total tract digestibility, blood chemistry, milk production and composition. However, HCN intake, blood and milk thiocyanate concentration were significantly higher (p<0.01) in cows fed fresh cassava foliage with no sign of potential toxicity. Dry matter intake, body weight changes, molar percentage of propionate in rumen, neutral detergent fiber (NDF) digestibility and nitrogen (N) retention of cows tended to be increased while DM digestibility (65.6, 72.7, 68.6 and 72.1% of total DM intake for the respective treatments), rumen bacteria population (1.4, 1.7, 1.6 and $1.7{\times}10^{11}$ cell/ml for respective treatments), fungal zoospore population (0.4, 0.6, 0.4 and $0.5{\times}10^{6}$ cell/ml for respective treatments), urinary allantoin (25.3, 28.0, 26.3 and 27.6 g/d for respective treatments), microbial N yield (136.0, 154.6, 142.8 and 151.3 g N/d for respective treatments) and milk protein content (3.4, 3.5, 3.2 and 3.5% for respective treatments) were significantly (p<0.05) higher in cows fed on supplemented sulfur at 0.4% of DM in comparison with 0.15% S-supplemented diets. Based on these results, it is concluded that cassava foliage could be used as a portion of roughage for dairy cows and supplementation of S would be nutritionally beneficial.

• 농업과학연구
• /
• 제46권1호
• /
• pp.151-161
• /
• 2019

Ashwagandha (Withania sominifera Duanal) is an important medicinal herb with increased demand after discovering its anti-stress and sex stimulating properties that are attributed to the presence of biologically active alkaloid compounds. The aim of this study was to elucidate a proper agro technological package that ensures the optimum growth of Ashwagandha to obtain the finest quality without degrading the pharmacologically active constituents. Mixtures of organic and inorganic fertilizers were combined with direct seeding and transplanted as four different treatments in this study. The fresh and dry weights of the tubers were recorded up to 12 months starting from two months after sowing (MAS) while the shoot height, root length, number of leaves, fresh and dry weights of the shoot and the root with a shoot ratio of up to 6 MAS were determined. The results revealed that the growth of Ashwagandha was not affected significantly by the method of planting, type of fertilizer or their combinations during most of the harvests. However, tubers harvested at 6 MAS had the highest recorded dry tuber weight per plant in all four treatments compared to the early harvests where two direct seeded treatments had the best results. Comparison of the phytochemical compounds showed that direct seeding with organic fertilizer had the highest recorded values for alkaloid and withaferine A contents with a lower percentage of fiber compared to the treatments with inorganic fertilizer. In conclusion, direct seeding with organic fertilizer and tubers harvested at 6 MAS are recommended as the best cultivation conditions and harvesting stage to obtain high quality tubers of Ashwagandha, respectively.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.66-71
• /
• 2008

Two cases with circumferential grooves were designed for a transonic compressor, and 3-D numerical simulations were conducted for stall mechanism at three representative speeds. A conclusion can be drawn from the comparison between compressors with or without casing treatment that: with the rising of rotation speed, stall margin increases dramatically under the help of casing treatments, and the case with middle grooves has reasonable compromise between stall margin increment and efficiency cutting. At lower speed, the increment reduces, and grooves at the back of blade tip have more influence on stall margin. Further investigation shows there is a transition in mechanism of compressor stall with the decline of rotational speed: at high rotation speed, the expansion of stall margin mainly results from the suppression of tip leakage vortex by casing treatments, yet it benefits more from the depression of boundary layer separation from suction surface of blade tip.

• 한국임상수의학회지
• /
• 제27권1호
• /
• pp.71-78
• /
• 2010

Analysis of variance (ANOVA) is a method to analyze the data from the experimental designs comparing two or more groups or treatments at the same time, and is the most effective tool of analyzing more complex data sets with different source of variations. This article describes the logic of ANOVA, the application of the method to the analysis of a simple data set, and the methods available for performing planned or post hoc multiple comparisons between the treatments means. In addition, the common misuse of the techniques is also discussed to emphasize that an inappropriate statistical analysis is potentially far more harmful than poorly conducted research. Lastly, an example is given for illustration purposes.

• Advances in concrete construction
• /
• 제6권4호
• /
• pp.375-386
• /
• 2018

This experimental work aims at developing and investigating a lightened concrete by the addition of treated straws. The used formulation is based on that of an ordinary concrete which is composed of sand and gravel as the main aggregates. The properties of the straws are improved by using one of two treatments before their use: the hot water and bitumen. Henceforth, the main objective of this study is to assess the mechanical characteristics of different formulations with different compositions and treatments on straws. The obtained results have shown that the addition of straws improves its lightness property. However, it decreases the compressive and flexural strengths as well as decreases the modulus of elasticity and increases the dimensional variations. Set into comparison to the concrete with untreated straws, the treatment of straws by hot water or by bitumen improves most of the characteristics.

• BMB Reports
• /
• 제31권4호
• /
• pp.405-408
• /
• 1998

Endonuclease-sensitive sites detected by T4 endonuclease V or UvrABC nuclease treatments were compared in the dihydrofolate reductase gene of UV-irradiated Chinese hamster ovary B-11 cells. The number of endonuclease-sensitive sites detected by T4 endonuclease V treatment followed by NaOH denaturation was twice that of formamide denaturation. Repeated treatment of damaged genomic DNA with T4 endonuclease V resulted in no further increase in the number of endonuclease-sensitive sites detected. The numbers of endonuclease-sensitive sites detected by UvrABC nuclease using each denaturation condition were similar. Sequential treatment with the two endonucleases using formamide denaturation resulted in twice the number of endonuclease-sensitive sites detected by treatment of each nuclease alone. Due to a lack of AP endonuclease activity these results suggest the presence of T4 endonuclease V-sensitive sites which could be complemented by alkaline gel separation or by UvrABC nuclease treatment.

• 한국환경과학회지
• /
• 제28권8호
• /
• pp.709-712
• /
• 2019

The effect of insect feed powder on the growth performance and economic evaluation of ducks was investigated. One hundred and twenty-old Pekin ducks were randomly assigned to two dietary treatments (0% and 1% Hermetia illucens powder) with three replicates of 20 birds each for 14-42 d. No significant (p>0.05) difference in growth performance between the control and 1% H. illucens powder was observed, except the feed conversion ratio (p<0.05), for the experimental period. The treatments with 1% H. illucens powder improved the economic indicators in comparison with the controls. Therefore, a diet supplemented with 1% H. illucens powder could significantly improve the feed conversion ratios and increase the economic indicators.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권2호
• /
• pp.85-89
• /
• 1990

Sixteen Harnai lambs were used in a completely randomized design to study the nutritive value of fourwing saltbush as a winter maintenance browse in comparison to native range grazing with or without protein and energy supplementation at Tomagh Range Livestock Research Station, in Loralai District, Balochistan. The animals were divided into four groups of four lambs each. These four groups were assigned four treatments at random: fourwing saltbush grazing alone, range grazing plus lucerne hay (100 g/head/day), range grazing plus barley grain (100 g/head/day) and range grazing alone for ten weeks. The results indicate that the two range grazing plus supplementation treatments produced weight gains which were not significantly different from each other (p < 0.05). Both of these treatments yielded significantly higher weight gains (p < 0.05) than did range grazing alone except for the last week of the study. Fourwing saltbush grazing provided cumulative weight gains at 3, 4, 6, 7 and 8 weeks which were not significantly different from the range grazing plus lucerne hay treatment and gained an average of 6 percent in body weight over the 10 week period of study. The carrying capacity for sheep of a mature stand of fourwing saltbush was approximately 20 Sheep-kg-days (SKD) of grazing per cubic meter of foliage. Results of this study suggest that under fourwing saltbush grazing alone, lambs do not only maintain their body weights but can also gain weight in winter.

• 디자인학연구
• /
• 제13권4호
• /
• pp.233-242
• /
• 2000

1990년대는 유압굴삭기의 전통적 조형이 새롭게 모색 및 재해석되는 시기로 판단되었으며, 이는 2가지 방향으로 정리될 수 있다. 하나는 유압굴삭기의 전통적 이미지에 관한 부정적 해석에서 기인한 '탈(post-heavy equipment)중기적' 경향이며, 다른 하나는 고유성 유지와 개선이라는 긍정적 해석에서 기인한 '후기(late-)중기적' 경향이다. 이는 동일한 현상을 다양하게 바라볼 수 있는 패러다임과 관련하는 것으로 사료된다. 이 시기에 개발 및 시판된 8개 연구대상 모델 중 유압굴삭기의 조형 경향은, 일본 색채디자인연구소에서 개발한 이미지스케일 3상한에서 2상한으로 변화였으며, 예외적으로 코벨코는 1상한까지 이동하는 경향이 있었다. 이는 탈중기적 이미지를 디자인 전략으로 채택하고 있는 코벨코만의 경우였다. 아울러, 인적(入的)공간으로서의 캐빈의 변화는 장비 전체의 변화에서보다 좀더 1상한으로 이동하고 있는데, 이는 물적(物的)공간과 시각적 차별화를 위한 것으로 사료되었다.

• 대한치과기공학회지
• /
• 제41권3호
• /
• pp.177-185
• /
• 2019

Purpose: This study was to investigate the effect of three different surface treatments on the shear bond strength of lithium disilicate ceramics to enamel. Methods: Totally 60 lithium disilicate ceramic disc specimens were fabricated with IPS e.max press (Ivoclar Vivadent, Schaan, Liechtenstein) and Mazic Claro (Vericom, Korea). 30 specimens in each lithium disilicate ceramic were assigned to 3 groups of the each following surface treatment: 1) $50{\mu}m$ airborne particle abrasion+silane, 2) 9.5% hydroflouric acid etching (HF)+silane, 3) $50{\mu}m$ airborne particle abrasion+9.5% HF+silane. Lithium disilicate ceramic surfaces after surface treatments were AFM examined. The shear bond strength was measured in a universal testing machine at 0.5mm/min crosshead speed. All data were analyzed using a two-way ANOVA and Tukey's test(${\alpha}=0.05$). Results: The mean surface roughness of lithium disilicate ceramics ranged from $0.178{\mu}m$ to $0.441{\mu}m$. The mean shear bond strengths ranged from $23.81{\pm}2.78MPa$ to $33.99{\pm}4.85MPa$. Conclusion: 1. Mazic Claro showed higher shear bond strength than IPS e.max press at 3 different surface treatments, and no statistically significant was observed. 2. The shear bond strength of IPS e.max press was strongly enhanced as surface treated with $50{\mu}m$ airborne particle abrasion and 9.5% hydroflouric acid etching. And there was no statistical significance at the shear bond strength of Mazic Claro with surface treatments.