• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.181-183
• /
• 2003

This paper presents an operator training simulator for power system restoration against massive black-out. The system is designed especially focused on the generality and convenient setting up for initial condition of simulation. The former is accomplished by using on line calculation methodology, and PSS/E data is used to define the initial situation. The proposed simulator consists of three major components - the Power flow(PF) module, data conversion(CONV) module and CUI subsystem. PF module calculates power flow, and then checks overvoltage of buses and overflow of lines. CONV module composes an Y-Bus array and a data base at each restoration action. The initial Y-Bus array is constructed from PSS/E data. The user friendly GUI module is developed including graphic editor and built-in operation manual. As a result, the maximum processing time for one step operation is 15 seconds, which is adequate for training purpose. Comparison with PSS/E simulation proves the accuracy and reliability of the training system.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.249-251
• /
• 2011

International energy agency(IEA) consisted of OECD countries deals with international energy problems. IEA/Wind ExCo is an execution committee under IEA for the implementing agreement for co-operation in the research, development and deployment of wind energy systems. Currently 22 countries participate the committee and 11 research tasks are in progress. 11 tasks are base technology information exchange, wind energy in cold climates, offshore wind energy technology deployment, integration of wind and hydropower systems, power systems with large amounts of wind power, cost of wind energy, labelling small wind turbines, social acceptance of wind energy projects, MexNext aerodynamics and comparison of dynamic computer codes and models, offshore wind energy and wakebench. At the presentation, activities of major wind energy countries and IEA/Wind ExCo and research tasks are introduced.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.459-468
• /
• 1997

To optimize the design and operation of a soil- air heat exchanger system, the effects of variables characterizing system design and operation on the performance of the system were analyzed by a theoretical model which included the three-dimensional transient heat conduction equation. The solution of the theoretical model was acquired by a computer program that uses Finite Difference Methods and Gauss-Seidel iteration computation, in which the time discretization scheme was an implicit difference appoximation. The computer program was validated first by comparison of the results for different grid sizes. Air outlet temperature, energy gain, and heat exchange efficiency of the system were analyzed based upon the tube diameter, tube length, tube thickness, and tube thermal diffusivity.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.67-87
• /
• 1991

The computer program which predicts the gas exchange process of multi-cylinder 4-Stroke cycle spark-ignition engine, can be great assistance for the design and development of new engine. In this study, the computer program was developed to predict the gas exchange process of multi-cylinder four stroke cycle spark ignition engine including intake and exhaust systems. When gas exchange process is to be calculated, the evaluation of the variation of the thermo-dynamic properties with time and position in the intake and exhaust systems is required. For the purpose, the application of the generalized method of characteristics to the gas exchange process is known as one of the method. The simulation model developed was investigated to the analysis of the branch system of multi-cylinder. The models used were the 2-zone expansion model and single zone model for in cylinder calculation and the generalized method of characteristic including area change, friction, heat transfer and entropy gradients for pipe flow calculation. The empirical constants reduced to least number as possible were determined through the comparison with the experimented indicator diagram of one particular operation condition and these constants were applied to other operating condition. The predicted pressures in cylinder were compared with the experimental results over the wide range of equivalence ratio and ignition timing. The predicted values have shown good agreement with the experimental results. The thermodynamic properties in the intake and exhaust system were predicted over the wide range of equivalence ratio and ignition timing. The obtained results can be summarized as follows. 1. Pressures in the exhaust manifold have a little influence on the equivalence ratio, a great influence on the ignition timing. 2. Pressures in the inlet manifold are nearly unchanged by the equivalence ratio and the ignition timing. 3. In this study, the behaviors of the exhaust temperature, gas in the exhaust manifold were ascertained.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.531-538
• /
• 2009

The paper deals with an operation scheme to improve the forecasting of output range and to regulate the active power output of the hybrid system consisting of a doubly fed induction generator (DFIG) and a fuel-cell. The power output of the wind turbine fluctuates as the wind speed varies and the slip power between the rotor circuit and power converter varies as the rotor speed change. The power fluctuation of a DFIG makes its operation difficult when a DFIG is connected to grid. A fuel cell system can be individually operated and adjusted output power, hence the wind turbine and fuel cell hybrid system can overcome power fluctuation by using a fuel-cell power control. In this paper, a fuel-cell is performed to regulate the active power output in comparison with the regulated active power output of a DFIG. And it also improves the forecasting of output range. Based on PSCAD/EMTDC tools, a DFIG and a proton exchange membrane fuel cell(PEMFC) is simulated and the dynamics of the output power in hybrid system are investigated.

• Membrane Journal
• /
• v.12 no.2
• /
• pp.55-66
• /
• 2002

fouling phenomena of ion exchange membranes were reviewed for improved design and operation of electodialysis. The membrane fouling index for electrodialysis (EDMFI) was defined for the quantitative analysis of fouling potential as an analogy to the pressure-driven membrane process. fouling phenomena were compared in the electrodialysis experiments with inorganic foulant (silica sol) and organic foulants (humate and bovine serum albumin (BSA)), and their fouling potentials were analyzed using the fouling index. The comparison showed that the EDMFI could be used as a quantitative measure of the fouling tendency in electrodialysis processes. As a novel fouling mitigation method, square wave power was reported to be effective in electrodialysis with organic foulants. The square wave powers having the pulsed electric field enabled to reduce the membrane fouling significantly at an optimal frequency.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.334-342
• /
• 2012

It is connected with various gauges existing in Euro-Asian continents. Such differences impedes the operation seriously as on the contact of railway tracks of different gauge the cargo must be either transshipped or the running assemblies of rail vehicles must be exchanged. Those operations are costly, time-consuming and require extended infrastructure together with very expensive storage and transshipment facilities at border-crossing point. Moreover, those operations extend transportation time considerably. Therefore, effectiveness of railway transportation systems significantly depends on track gauge change 1435/1520mm, which connects with complicated handling-shifting operations. The paper concerns assessment of effectiveness in strategical rail systems with gauge changing. The paper presents short description of transport system with gauge changing and initial assessment of shifting technologies. Method of system assessment comparison based on Life Cycle Cost model is described here as well.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.218-224
• /
• 1999

Continuous ion exchange characteristics of the synthetic coolant contained Ni, Co and Ag ions of low concentration in acidic-oxidizing conditions have been studied to suggest the guideline for the optimum operation of mixed-bed demincralizer during the shutdown period of a pressurized water reactor (PWR). In the effect of the form of cation resins on the removal capacity of metal ions, the performance of a $H^+$-form resin was about 6% higher than that of a $Li^+$-form resin. Mixed-bed of cation and anion resins in comparison with nonmixed-bed of them, had no affected on the removal capacity of metal ions but very slightly increased the slope of breakthrough curves of metal ions. In the effect related to acidic-oxidizing conditions of the coolant, the addition of boric acid very slightly decreased the slope of breakthrough curves of metal ions, while the addition of hydrogen peroxide slightly decreased the removal capacity of metal ions.

• Journal of Information Technology Services
• /
• v.8 no.1
• /
• pp.165-177
• /
• 2009

This paper reviews diverse IP mobility and fast handover mechanisms for seamless Internet services. Especially, fast handover mechanisms for the Proxy Mobile IPv6( PMIPv6) are categorized according to their approaches. Then, a new fast handover PMIPv6(FH-PMIPv6) mechanism is proposed using only L3 signaling message exchange. In the proposed FH-PMIPv6 mechanism, only local mobility anchor(LMA) exchanges L3 signaling messages with mobility access gateways(MAGs) for the fast handover operation. That is, inter-MAG signalling messages are not required for the fast handover operation. Therefore, unlike existing fast handover mechanisms, two relevant neighbouring MAGs need not set up the security association(SA) to protect fast handover related signaling messages and share SA related information. Moreover, the L3 triggering message is defined newly by standard ICMPv6 to trigger promptly the proposed mechanism. Analysis and comparison of the handover latency are performed for the proposed mechanism and existing mechanisms, which shows that the proposed FH-PMIPv6 mechanism has the favorable performance.

• Journal of Multimedia Information System
• /
• v.8 no.3
• /
• pp.191-196
• /
• 2021

Computational thinking refers to the process and method of solving everyday problems using computers. When teaching a computational thinking class for computer majors and non-majors at university, the easiest example to deliver the concept of computational thinking is sorting. Sorting is the concept of arranging given data in order. In this work, we have implemented four visualized sorting algorithms that anyone can easily use. In particular, it helps to understand the difference between the algorithms by showing the number of comparisons and exchanges between elements, which are the criteria for evaluating the performance of the sorting algorithm in real time. It was confirmed that the practice of using the sorting visualization app developed in this research contributed to the improvement of students' understanding of computational thinking.