• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.703-705
• /
• 2003

A comparison was made between the chlorophyll a and suspended solid (SS) retrievals from OSMI and SeaWiFS sensor to chlorophyll a and SS values determined with the standard method during the NFRDI's research cruises. The percentage of organic and inorganic materials from the SS was calculated to study the contribution of turbid water in the northern part of the East China Sea. The open sea waters in the Kuroshio regions of the East China Sea showed relatively higher concentration of volatile SS. However, towards the northwestern part of the East China Sea, the situation became much more optically different with the non-volatile SS from the Yangtze river and the sea bottom sources in the sea in winter and spring seasons. Furthermore, in order to indirectly detect low salinity water with high turbidity, which related to the Yangtze river using remote sensed data from the satellites, a comparison between the results of the band ratio(nLw 490nm/nLw 555nm) of SeaWiFS (OSMI) and the distribution of low salinity around the Jeju Island was presented.

• 비파괴검사학회지
• /
• 제23권6호
• /
• pp.616-621
• /
• 2003

There are various Non-Destructive Evaluation (NDE) techniques used for measurement of residual stresses in material, such as magnetic methods, X-ray diffraction, Ultrasonic velocity measurement etc. The capabilities, applications and limitations of these techniques for evaluation of cold work/plastic deformation were studied and compared. Mild steel plates were subjected to different degree of cold deformation and were analyzed by Magneto-mechanical Acoustic Emission (MAE), Barkhausen Noise (BN) and magnetic properties (hysteresis loop parameters analysis). Further, these specimens were analyzed by X-ray diffraction and ultrasonic velocity measurements. The microhardness measurement and microstructure studies of these cold worked plates were also carried out. The results of all these studies and comparison of different techniques are discussed in this paper.

• 한국경영과학회지
• /
• 제28권1호
• /
• pp.63-77
• /
• 2003

Group buying is one of the most popular transaction patterns on the internet at least in Korea. Nevertheless, it is hard to find academic researches for it in view of consumer behavior. In this paper, we analyze factors which determine consumer's attitude toward and intention of participation in Internet group buying by comparison of Internet individual one. For this purpose, we propose “lowering price”, “decreasing risk” and “reducing transaction cost” as relative advantages and "lack of product assortment" and "delay of time" as relative disadvantages over individual buying on the Internet. For empirical test, Internet users who have some experiences of individual buying but not group ones on the Internet are surveyed and analyzed. In result, a satisfying model fitness for structural equation model is derived and most hypotheses except the relationship between "decreasing risk" and "attitude toward Internet group buying" are accepted. Our results provide not only academic contribution by suggestion of a research framework but also practical insight by discussion of diverse features in Internet group buying.verse features in Internet group buying.

• 한국IT서비스학회지
• /
• 제10권2호
• /
• pp.203-221
• /
• 2011

The purpose of this study is to investigate the applications of Structural Equation Modeling(SEM) into MIS area in recent years. Two methodologies, Lisrel and PLS, are adopted for the method comparison. A research model, based upon TAM(Technology Acceptance Model) is used for the analysis of the data set of a previous study. The research model includes six research variables that are composed of twenty-eight question items. 272 data are used for data analyses through Lisrel v.8.72 and Visual PLS v.1.04. This study shows the statistical results of Lisrel are the same to those of PLS. The contribution of this study can be suggested as the followings; (1) A theoretical comparison of two methodologies is shown, (2) A statistical analysis is done at a real-situated data set, and (3) Several implications are suggested.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.413-420
• /
• 2015

In this study, we present a comparison of multistage axial flux permanent-magnet machines (AFPMs) with different topologies for use as 100 W-class portable generating systems. Three topologies were selected, and the maximum power density and high level of efficiency were achieved by following the response surface methodology (RSM) in the design. Three-dimensional finite element analysis (FEA) was used to conduct numerical experiments to obtain the optimum design using the RSM and suggest a proper configuration of the portable generating system.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.498-504
• /
• 2015

This paper proposed an Spread Spectrum Time Domain Reflectometry (SSTDR) using time-frequency correlation analysis in order to have more accurate fault determination and location detection than classical SSTDR despite increased signal attenuation due to the long distance to cable fault location. The proposed method was validated through comparison with classical SSTDR methods in open- and short-circuit fault detection experiments of low-voltage power cables. The experimental results showed that the proposed method can detect correlation coefficients at fault locations accurately despite reflected signal attenuation so that cable faults can be detected more accurately and clearly in comparison to existing methods.

• Macromolecular Research
• /
• 제8권4호
• /
• pp.153-164
• /
• 2000

By electrodeposition (ED) using a monomeric- and two polymeric coupling agents, the interfacial shear strength (IFSS) of carbon fiber/epoxy composites was investigated by fragmentation test. ED results were compared with the dipping and the untreated cases under dry and wet conditions. Multi-fiber composites (MFC) were used for the direct comparison for the untreated and the treated cases. Various treating conditions including time, concentration and temperature were evaluated, respectively. Under dry and wet conditions ED treatment exhibited much higher IFSS improvement compared to the dipping and the untreated cases. Monomeric- and polymeric coupling agents exhibited the comparative IFSS improvement. Adsorption mechanism between coupling agents and carbon fiber was analyzed in terms of the electrolyte molecular interactions during ED process based on to the chain mobility. The microfailure modes occurring from the fiber break, matrix and interlayer cracks were correlated to IFSS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1359-1360
• /
• 2007

In this paper, it is described the characteristics comparison of LV insulated materials contaminated by the salt vaporization and the particulates. The contact angle of normal PVC is measured $75^{\circ}$ but its of PVC contaminated by the salt vaporization for 500 hours is measured $63^{\circ}$. The contact angle of normal bakelite is measured $66^{\circ}$ but its of bakelite contaminated by the salt vaporization for 500 hours is measured $44^{\circ}$. And the contact angle of normal acrylic resin is measured $65^{\circ}$ but its of acrylic resin contaminated by the salt vaporization for 500 hours is measured $60^{\circ}$. In the surface of insulated materials contaminated by the particulate, the contact angle is decreased. The surface of bakelite is not good as an insulator.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.588-590
• /
• 2003

For the normal operations, KOMPSAT-1 orbits are determined using GPS navigation solutions data such as position and velocity vectors. Currently, the accuracy of GPS navigation solution data is generally known as on the order of 10~30 m with the removal of S/A. In this paper, an estimate of the current orbit determination accuracy for the KOMPSAT-1 is given. For the evaluation of orbit determination accuracy, the orbit overlap comparison is used since no independent orbits of comparable accuracy are available for comparison. As a result, It is shown that the orbit accuracy is on the order of 5 m RMS with 4 hrs arc overlap for the 30 hr arc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.319-322
• /
• 1998

This paper presents a comparison of off-line power system analysis packages in terms of the main structure, the computation algorithm, and the I/O structure of programs, which is necessary for the use of the real-time power system simulator to be developed at KEPRI. PSS/E, PSAPAC, EUROSTAG, and EMTP are investigated and a case study is performed to show the compatibility of input data between PSS/E and PSAPAC.