• 제목/요약/키워드: Compare Disaster Rate Comparison

검색결과 4건 처리시간 0.019초

소규모 사업장에 대한 안전 T-점수를 이용한 업종별 상해발생률의 분석에 관한 연구 (A Study of Analysis on Variation of the Rate of Injury according to the Job Type Using Safe-T-Score on the Small Sized Companies)

  • 임영문;최요한
    • 한국안전학회지
    • /
    • 제14권4호
    • /
    • pp.176-181
    • /
    • 1999
  • The objective of this study is to compare and analyze the industrial injury-values of all the industries through yearly accident rate and frequency rate based on the governmental documentation of industrial injuries. The samples for this study are chosen from the companies with less than 200 employees under charge of the Kangnung Ministry of Labor during the period of 1995-97. Safe-T-Score is used for statistic control on the qualitative comparison of the present and the past industrial injury-rates. In the comparison of the past and the present industrial injury-rate by means of Safe-T-Score, this study shows that there does not exist any remarkable improvement, whereas the document of the Ministry of labor reports that the rate is decreasing greatly. Therefore, this study proposes some solutions to reduce industrial disasters and points out the necessity of more practical and effective methods to analyze the industrial disaster.

  • PDF

안전교육의 효과성 향상에 관한 연구 - 제조업 위험성평가 담당자 교육을 중심으로 - (A Study on the Effectiveness Improvement of Safety Education - Focused on the Education of Manufacturing Risk Assessment Officer -)

  • 김진억
    • 한국재난정보학회 논문집
    • /
    • 제19권1호
    • /
    • pp.97-104
    • /
    • 2023
  • 연구목적: 안전보건공단에서는 위험성평가를 용이하게 하기 위해 웹 기반의 KRAS 개발하여 각 사업장의 유형별 평가 모델을 제공하고 있다. 위험성평가의 이해를 돕기위해 민간 기관에서는 위험성평가 담당자 교육을 개설하여 운영하고 있다. 기업의 규모에 따른 제조업 위험성평가 담당자 교육의 효과성을 분석할 것이다. 연구방법: 2017년부터 2021년까지 5년 이내 위험성평가 담당자 교육을 이수한 670개 사업장을 대상으로 SPSS 22를 이용하여, 재해 발생 관련 데이터를 통해, 100인을 기준으로 100인 미만 집단과 100인 이상 집단을 나누어 상관분석과, t-검정을 통해 재해율을 분석하였다. 연구결과: 가설 1번~5번 채택, 5~8번 기각 되었다. 결론: 100인 이상의 기업 교육을 대상으로 한 기업의 규모에 따른 교육과정의 편성을 고려하고 위험성평가 인정 시의 혜택을 상향하는 부분에 대하여 제고해 볼 수 있다.

Rainfall-induced shallow landslide prediction considering the influence of 1D and 3D subsurface flows

  • Viet, Tran The;Lee, Giha;An, Hyunuk;Kim, Minseok
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2017년도 학술발표회
    • /
    • pp.260-260
    • /
    • 2017
  • This study aims to compare the performance of TRIGRS (Transient Rainfall Infiltration and Grid-based Regional Slope-stability model) and TiVaSS (Time-variant Slope Stability model) in the prediction of rainfall-induced shallow landslides. TRIGRS employs one-dimensional (1-D) subsurface flow to simulate the infiltration rate, whereas a three-dimensional (3-D) model is utilized in TiVaSS. The former has been widely used in landslide modeling, while the latter was developed only recently. Both programs are used for the spatiotemporal prediction of shallow landslides caused by rainfall. The present study uses the July 2011 landslide event that occurred in Mt. Umyeon, Seoul, Korea, for validation. The performance of the two programs is evaluated by comparison with data of the actual landslides in both location and timing by using a landslide ratio for each factor of safety class ( index), which was developed for addressing point-like landslide locations. In addition, the influence of surface flow on landslide initiation is assessed. The results show that the shallow landslides predicted by the two models have characteristics that are highly consistent with those of the observed sliding sites, although the performance of TiVaSS is slightly better. Overland flow affects the buildup of the pressure head and reduces the slope stability, although this influence was not significant in this case. A slight increase in the predicted unstable area from 19.30% to 19.93% was recorded when the overland flow was considered. It is concluded that both models are suitable for application in the study area. However, although it is a well-established model requiring less input data and shorter run times, TRIGRS produces less accurate results.

  • PDF

제조공정상 발생하는 비산분진의 화재·폭발 위험성에 대한 열적특성 비교에 관한 연구 (Study on the Thermal Characteristic Comparison of Fire.Explosion Hazard of Fugitive Dust Generated in the Manufacturing Process)

  • Sun, Ko Jae
    • 한국재난정보학회 논문집
    • /
    • 제10권1호
    • /
    • pp.71-83
    • /
    • 2014
  • 본 연구에서는 잠재적인 화재 및 폭발 위험성이 있는 밀가루 제조공정에서의 분진 및 기능성 비누제조공정에서의 살리실산분진, 합판 제조공정에서 목분, 폐타이어 처리공정에서 발생하는 분진들을 채집하여 열적특성을 비교하기 위해 실험을 수행하였다. DSC 실험결과 대상시료 모두 활석의 첨가량이 증가할수록 열 유속은 감소하고 온도는 감소상태인 것으로 분석되었다. 이는 분해속도가 줄어드는 것이고, 위험성이 감소하고 있는 것을 나타내는 것이다. 그러나 대상시료 모두 승온속도가 증가 할수록 흡열개시온도가 낮은 온도 부분으로 이동하고 있으며, 흡열량도 크게 증가하였다. 이는 승온속도가 증가할수록 시료의 분해위험성이 증가하는 것으로 분석되었다. 아울러TGA 실험결과 대상시료 모두 무게감량의 비율은 활석의 양이 증가할수록 전체 무게감량이 줄어들어 열적 안정성을 확보하는 것으로 나타났다. 향후 분진폭발메커니즘의 지속적 연구와 보완이 효과적인 분진폭발예방 대책수립에 기여할 것으로 기대된다.