• Wind and Structures
• /
• v.35 no.1
• /
• pp.35-54
• /
• 2022

A comparative study of aeroelastic vibrations of spring-mass cylinder and chimneys, with the help of a few wake oscillator models available in the literature, is presented. The models include those proposed by Facchinetti, Farshidian and Dolatabadi method-I, Farshidian and Dolatabadi method-II, de Langre, Skop and Griffin. Besides, the linear model proposed by Simiu and Scanlan is also incorporated in the study. For chimneys, the first mode oscillation is considered, and the top displacements of the chimneys are evaluated using the considered models. The results of the analytical model are compared with those obtained from the numerical solution of the wake-oscillator coupled equations. The response behavior of the cylinder and three chimneys of different heights are studied and compared with respect to critical parametric variations. The results of the study indicate that the numerical analysis is essential to capture the effect of non-linear aeroelastic phenomena in the solutions, especially for small damping. Further, except for the models proposed by Farshidian and Dolatabadi, other models predict nearly the same responses. The non-linear model predicts a much higher response as compared to the linear model.

• Journal of Korean Society for Quality Management
• /
• v.46 no.3
• /
• pp.717-738
• /
• 2018

Purpose: This study aims to analyze why surveys of a single set of customer requirement result in different Kano analyses depending on the survey questionnaire designs. Methods: This study singled out 14 common features from four different questionnaires of two studies of Smart Car features and analyzed them using the Kano model. Several methods and devices were used: Group Comparison and Timko Index were applied; Kano Distribution Index, Timko Dispersion and Kano Conformity were newly introduced for the quantitative analysis; Correlations between Timko indices from different Kano questionnaires were conducted; Heuristic Splitting technic for reinforcing attribute categorization is introduced. Results: Correlation Coefficient proved strong positive relations among the three questionnaires, whose agreement degree of the resulting Kano attributes showed less than 10% when Indifferent was ignored. Heuristic Splitting on Timko charts enhanced the degree of the resulting Kano attributes up to 80%. Conclusion: Among the questionnaires the representation of customer requirements tends to move by parallel shifts on the Timko chart maintaining their relative locations. Heuristic Splitting suggests a rational solution to the interpretation of those inexplicable attribute categories resulting from traditional Kano methods.

• Advances in Computational Design
• /
• v.3 no.4
• /
• pp.385-404
• /
• 2018

The study investigated an area of sustainable structural design that is often overlooked in practical engineering applications. Specifically, a novel method to simultaneously optimise the cost and embodied carbon performance of steel building structures was explored in this paper. To achieve this, a parametric design model was developed to analyse code compliant structural configurations based on project specific constraints and rigorous testing of various steel beam sections, floor construction typologies (precast or composite) and column layouts that could not be performed manually by engineering practitioners. Detailed objective functions were embedded in the model to compute the cost and life cycle carbon emissions of the different material types used in the structure. Results from a comparative numerical analysis of a real case study illustrated that the proposed optimisation approach could guide structural engineers towards areas of the solution space with realistic design configurations, enabling them to effectively evaluate trade-offs between cost and carbon performance. This significant contribution implied that the optimisation model could reduce the time required for the design and analysis of multiple structural configurations especially during the early stages of a project. Overall, the paper suggested that the deployment of automated design procedures can enhance the quality as well as the efficiency of the optimisation analysis.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.186-192
• /
• 1999

Safety-related equipments of nuclear power plant must be seismically qualified to demonstrate their ability to function as required during and/or after the earthquake, The seismic qualification is usually achieved through analysis and testing. Analysis method is preferably adopted for structurally simple equipments which are easy to be mathematically modeled. However even for relatively complex equipments analysis method is occasionally used for computing the input motion or supporting information for the component test followed. Electrical cabinet is a typical example for which analysis method is combinedly used with test to get modal properties of the enclosing cabinet structure. Usually the structural elements and doors of the cabinet are loosely interconnected with small-size bolts or spot welding. Therefore cabinet-type equipment usually has high and complex nonlinear properties which are not easily idealized by simple practical modeling techniques. in this paper with respect to a typical cabinet-type structure(instrumentation cabinet of nuclear power plant) a comparative study has been performed between three different state-of-the -art modeling techniques: lumped mass model frame model and FEM modal. Form the study results it has been found that modal properties of the cabinet-type structure in the elastic behavior range can be reasonably computed through any type of modeling techniques in the practice with slight modification of model properties to get better accuracy. However it needs additional modeling techniques to get reasonable results up to nonlinear range.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.3-10
• /
• 2003

Developments in science and technology based on computer technology influenced military fields and created up-to-date weapons and equipment, and as a result, which is changing the war accomplishing methods of the future warfare. Due to these changes in the war accomplishing methods, the army command centers are requested to make changes in their decision-making process. In other words, they need to apply more scientific methods rather than just build a scheme by the mere analysis of commanders and the staffs as in the past. Consequently, we propose a model, Vision 21 we developed as a war game model for division-size unit analysis use, in the COA development process, which is the most important part in establishing the OPLAN for mission accomplishment. Vision 21, with a comparative analysis of the other COA built in the COA development process, can be applied to making the best COA. Model employment concept can let us choose the best COA, operating war games on condition that the COA of the opposite forces is fixed and ours sequentially opposed against, and with a comparative analysis also. Moreover, if the time available is limited, before establishing several courses, we can apply the COA to the process for making the best decision, analysing in stages or by main phases and not establishing several courses for a special purpose.

• Journal of the Korean Society for information Management
• /
• v.19 no.4
• /
• pp.113-135
• /
• 2002

An interface or integration among various information system is needed to construct knowledge management infrastructure. Particularly, digital library and knowledge management system have to be implemented in the view of integration for activating interaction of organizational knowledge. So this study conducts comparative analysis between two systems in the perspective of knowledge management key factors, and then explores the ways toward an integration model. The integration model is designed for activating user interface and consistent flow of knowledge. This model is expected to contribute to increase the performance of knowledge management.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2749-2753
• /
• 2009

Structural characteristics that influence on the insecticidal activity ($pI_{50}$) of 2-(n-octyl)isothiourea analogues (1-45) against the diamondback moth (Plutella xylostella, L.) based on three dimensional quantitative structure activity relationships (3D-QSARs) were discussed quantitatively using a comparative molecular field analysis (CoMFA) and a comparative molecular similarity indeces analysis (CoMSIA) methods. The statistical values of the CoMFA 2 model were better than those of the CoMSIA 1 model. The CoMFA 2 model was the optimized model with the correlativity (the training set: Ave. = 0.104 & PRESS = 0.613) and the predictability (the test set: Ave. = 0.086 & PRESS = 0.096). Insecticidal activities with the optimized CoMFA 2 model were dependent upon steric factors (79.4%) of $R_1-R_3$ substituents. From the analytical results of CoMFA contour maps, it is predicted that the R1 substituent of 1-45 which has a steric favor in a broad space, $R_2\;and\;R_3$ groups with a steric favor in a narrow space and a H-bond donor favor would have better the insecticidal activity.

• Journal of Information Technology Services
• /
• v.15 no.2
• /
• pp.51-63
• /
• 2016

In this study, we conducted a comparative analysis of R&D investment efficiency and operational efficiency of IT firms using Data Envelopment Analysis (DEA). We categorized thirteen sample firms into two groups-IT manufacturing and IT service-after an extensive literature review on IT industry classification. We adopted an output-oriented two-stage DEA model suggested by Banker et al. (1984) with total asset and R&D investment as input variables. Then, we constructed investment efficiency and operational efficiency by using Return on Equity (ROE) and Return on Asset (ROA) as intervening variables and operating income and Earnings Per Share (EPS) as output variables. The outcome of the analysis is summarized as follows. First of all, IT manufacturing firms were more efficient (57% on average) than IT service firms. To be specific, IT service firms showed decreasing returns to scale (DRS) with diseconomy of scale. In contrast, IT service firms showed higher operational efficiency (81.5% on average) than IT manufacturing firms. Also, we conducted a Mann-Whitney U test to compare the output of IT service firms and IT manufacturing firms. Lastly, we found a negative correlation ($R^2$ = -.754) between R&D investment efficiency and operational efficiency which infers the trade-off between two constructs

• Communications for Statistical Applications and Methods
• /
• v.24 no.4
• /
• pp.339-351
• /
• 2017

Resampling approaches were the first techniques employed to compute a variance for the Gini coefficient; however, many authors have shown that an analysis of the Gini coefficient and its corresponding variance can be obtained from a regression model. Despite the simplicity of the regression approach method to compute a standard error for the Gini coefficient, the use of the proposed regression model has been challenging in economics. Therefore in this paper, we focus on a comparative study among the regression approach and resampling techniques. The regression method is shown to overestimate the standard error of the Gini index. The simulations show that the Gini estimator based on the modified regression model is also consistent and asymptotically normal with less divergence from normal distribution than other resampling techniques.

• International Journal of High-Rise Buildings
• /
• v.12 no.1
• /
• pp.49-61
• /
• 2023

The transit-oriented development (TOD) model can effectively help to solve urban problems and promote sustainable urban development. The United States and Japan are widely considered the earliest two countries to start TOD practices; however, the origins of TOD models in the two countries were different. The TOD practices in the two countries formed distinct characteristics, yet their differences have been underexplored. This study aims to grasp the characteristics of the TOD model in the two countries through a systematic comparative analysis of 10 typical cities in the United States and Japan that have adopted the TOD model. This paper compares the case cities' three key aspects of the TOD model: public transit system, spatial form, and land use, and summarizes the characteristics of TOD models in the two countries from a city-level perspective, to help deepen the global understanding of TOD.