• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.155-156
• /
• 2023

This study aims to analyze the factors that cause differences in the evaluation results of the life cycle carbon emissions assessment of buildings in both Korea and China as part of the methodology research of building life cycle assessment for Chinese buildings to promote building life cycle assessment in China. Specifically, it examines the building LCA standards of Korea and the standard for building carbon emission calculation in China as mentioned in the green building certification systems of both countries. Based on the investigation of the two standards, the life cycle carbon emissions of the evaluation target building were evaluated using the building life cycle assessment methods of both countries, and the influencing factors that cause differences in the life cycle carbon emission assessment results of the two countries were analyzed.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.6-14
• /
• 2007

The objective of this research is to comparative LCA(life cycle assessment) between two different model of Electric Motor Unit(EMU).the environmental impact of Aluminum body Electric Motor Unit(EMU) and Stainless Steel(STS) body Electric Motor Unit(EMU). LCA process consists of four steps which are goal, scope definition, life cycle impact analysis(LCIA) and life cycle interpretation. ISO 14044 provides the LCA standard method which can be conducted by using comparative LCA. From the research it is foung that the Aluminium Body Electric Motor Unit (EMU) is 3.6ton heaver than Stainless Steel(STS) body Electric Motor Unit(EMU). The system boundary of both Electric Motor Unit (EMU) are same life span and travel same distance. These both Electric Motor Unit (EMU) has same kind of environmental impact which is maximum Ozone Depletion(OD). During using period of these two models, the Aluminium Body Electric Motor Unit(EMU) has more global warming(GW) effect but Stainless Steel(STS) body Electric Motor Unit(EMU) has more Ozone Depletion(OD) effect. The above result is obtained by using LCA software PASS verson 3.1.3.

• Journal of Environmental Impact Assessment
• /
• v.14 no.6
• /
• pp.443-453
• /
• 2005

For the purpose of the comparative environmental estimation of the incineration processes for domestic wastes, environmental impacts for several incineration processes for one ton of domestic wastes have been estimated by employing life cycle assessment as the environmental impact assessment method. The scheme of minimum production of environmental pollutants has been considered for three different incineration processes. The evaluation for latent influence on environment was carried out by using CML(Center of Environmental Science) method which was developed by University of Leyden in Netherlands based on the equivalency factor suggested by Korea Accreditation Board. The result of life cycle assessment has showed that the total cost analysis according to the amount of incinerating waste was dependent on the operating conditions of incineration process. In addition, the annual running cost for the incineration of one ton of wastes was estimated to be negatively dependent on the amount of wastes. The degree of environmental pollution was mainly due to the kinds of the wastes rather than by the amount of wastes.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.239-246
• /
• 2015

Enforced environmental regulations call for extending the domain of manufacturers' responsibility to the entire product life cycle. To comply with the environmental regulations, manufacturers have constructed reverse logistics networks to re-collect their leftover waste for recycling consumed resources. However, the operational activities associated with storage, loading and transportation processes within the networks inevitably impose environmental burdens. Particularly, the transportation process largely influences environmental performance due to perpetual uses of transportation vehicles. Therefore, there is a need to develop an environmentally-conscious transportation model that can efficiently manage the uses of transportation vehicles. Additionally, it is vital to analyze its significances of environmental performance to compare quantitatively it with existing models. This paper proposes a transportation model for improving environmental performance in a reverse logistics network. This paper also presents a case study to perform its comparative analysis using Life Cycle Assessment that evaluates potential environmental impacts of a product system.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.181-193
• /
• 2023

In this study, we conducted a comparative life cycle assessment (LCA) of two different products, considering reusable and single-use packaging for fresh food distribution. For reusable packaging, we utilized expanded polyethylene (EPE), while for comparison, a disposable box made of widely used expanded polystyrene (EPS) was selected. We comprehensively analyzed the environmental impacts of production, transportation, reprocessing (for reused boxes), and disposal across 18 impact categories. Upon analyzing the actual reuse of 300 rounds of fresh food, the cumulative global warming potential (GWP) values for the EPE box were found to be 280.21 kg carbon dioxide (CO₂) eq, demonstrating a significant 75% reduction compared to those of the EPS box. Furthermore, it was observed that the GWP values for the EPE boxes became equivalent to those of the EPS boxes after 12 rounds of reuse. In conclusion, reusable packaging shows substantial potential to contribute to the reduction of environmental burdens, aligning well with global environmental requirements for sustainable food distribution and related industries.

• Architectural research
• /
• v.15 no.3
• /
• pp.143-150
• /
• 2013

The Korean government recently has rediscovered the potential value of Han-Ok, the Korean traditional house, as an eco-friendly building. In order to objectively verify the environmental performance of Han-Ok as a low carbon green building, this paper suggests the analysis method of GHG emission load of Korean traditional house, based on Life Cycle Assessment, which is commonly abbreviated to "LCA". The environmental impacts caused by building construction and operation can be analyzed through the sum of input and output data from every phase. The study particularly describes the GHG reduction effect by using traditional building materials such as wood products, traditional clay roof tiles, and mud, which are mainly used to construct Han-Ok. Also the study proposes the method for comparative analysis of quantity of GHG emissions in building's entire life cycle so that the data can be used as a reliable basis to optimize the environmental performance of building.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.1459-1460
• /
• 2004

An AHP-based framework for comprehensive comparison of several power technologies haas been developed. A questionnaire has been designed and is about to surveyed for extracting boty weight vectors and subjective evaluation values. The attitude of evaluator groups will be incorporated into these two types of quantification.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.596-599
• /
• 2007

A comparative Life Cycle Assessment (LCA) among three types of Electric Motor Unit (EMU) Interior Panel (IP) was conducted. A functional unit for comparative LCA is a weight of IP for 1 EMU. It is assumed that Manufacturing stage and its upstream processes, Use stage and End of Life (EoL) stage are included in the boundary of product system. For Use stage, the weight of IP causes electricity consumption. It is assumed that aluminum IP is recycled and the other IPs are incinerated at the EoL stage. As a comparison results, aluminum IP has much larger environmental impact (5.162pt) than others (FRP IP; 4.069pt, Phenol IP; 4.053pt) even though recycling consideration is included. The manufacturing stage of aluminum IP has relative big environmental impact (1.824pt) and this point make the most important difference from other IPs (FRP IP; 0.1617pt, Phenol IP; 0.4534pt)). Despite of large weight difference between FRP IP (888.96kg) and phenol IP (316kg), the final environmental impact result has only little difference (0.016pt, 0.39%). With this result, the EMU designer can choose IP with a consideration of the environmental performance of IP.

• Journal of Power System Engineering
• /
• v.22 no.1
• /
• pp.72-78
• /
• 2018

With growing concerns over air pollutions attributed to shipping activities, the international maritime organization has enacted a series of stringent regulations. In particular, MARPOL Annex IV Reg. 16 requires sulfur contents from exhaust gases of marine engines to be progressively reduced. To comply with this regulation, three feasible options have been introduced: using LNG as a marine fuel, using heavy fuel oil with the scrubber system, and using the marine gas oil (a type of low sulfur fuel oil). For the objectives of this paper, the holistic environmental impacts pertinent to these options were investigated and compared in ways that the flows of energy and emission were tracked and quantified through the life cycle of the ship. Research findings obtained from a case study with a large bulk carrier showed that the use of the scrubber system to purify heavy fuel oil would produce relatively fewer amounts of emissions attributing to global warming than other two options. On the other than, the use of LNG would be the way to operate the ship in a cleaner way in terms of reducing the acidification, eutrophication, and photochemical effects. Throughout the analysis, the excellence of life cycle assessment was proven to shift the environmental impact of marine systems from the short-term view to the long-term one.

• Land and Housing Review
• /
• v.12 no.2
• /
• pp.109-120
• /
• 2021

Global warming due to increased carbon dioxide is perceived as one of the factors threatening the future. Efforts are being made to reduce carbon dioxide emissions in each industry around the world. In particular, environmental loads and impacts during the life cycle of SOC structures and buildings have been quantitatively assessed through a quantitative method called Life Cycle Assessment (LCA). However, the construction sector has gone through difficulty in quantitative assessment for several reasons: 1) LCI DB is not fully established; 2) the life cycle is very long; 3) the building structures are unique. Therefore, it takes enormous effort and time to carry out LCA. Rather than estimating carbon emissions with accuracy, this study aims to present a simplified estimation model that allows owners or designers to easily estimate carbon dioxide emissions with little effort, given that rapid and rough decisions regarding environmental load reduction are to be made. This study performs the LCA using data from 25 road construction projects across the country, followed by multiple regression analyses to derive a simplified carbon estimation model (SLCA). The study also carries out a comparative analysis with values estimated by performing a typical LCA. The comparison analysis shows an error rate of less than 5% for 16 road projects.