• 한국환경독성학회:학술대회논문집
• /
• 한국환경독성학회 2003년도 추계국제학술대회
• /
• pp.169-169
• /
• 2003

In Korea, there is no CRA studies and has not well known CRA and not well established their methodologies. Therefore, objectives of this study is to establish the framework of CRA consisting of health risk, economic risk and perceived risk and the detail methodologies of three main component of estimating and comparing those risks for on the three environmental problems of air pollution, indoor air pollution and drinking water contamination which being subjective to the eight sub-problems of hazardous ai. pollutants (HAPs), regulated pollutants (representative as PM10) and Dioxins (PCDDS/ PCDFs) in air pollution, and indoor ai. pollutants (IAPs) and Radon in indoor air pollution, and drinking water pollutants (DWPs), disinfection-by- products(DBPs) and radionuclides in drinking water contamination in Seoul, Korea. And then, their problems set priorities by individual and integrated risk. As a results, ranking of health risk were the following order of indoor air pollution, air pollution and then drinking water contamination, in three environmental problems and of radon, PM10, IAPs, HAPs, DWPs, Dioxins, DBPs, and then radionuclides in eight sub-problems. And that of economic risk were the same order. In the contrary, ranking of perceived risk were the following order of air pollution, drinking water contamination, and then indoor air pollution, and of HAPs, Dioxins, radionuclides, PM10, DWPs, IAPs, Radon and then DBPs.

• 디자인학연구
• /
• 제16권1호
• /
• pp.261-270
• /
• 2003

다양한 형태의 멀티미디어 요소와 컨텐츠를 보유하고 있는 웹사이트가 증가함에 따라, 사용자는 각 경우에 대하여 다른 네비게이션 방법을 사용하고 있다. 여기서는 사용자의 네비게이션 유형이 웹사이트 종류와 태스크 타입에 따라 어떠한 변화를 나타내는지에 중점을 두고 링크의 구조와 종류에 대한 연구를 진행하고, 이를 검증하기 위한 사용성 테스트를 실시하였다. 웹사이트의 구분에서는 신문과 쇼핑을, 태스크의 구분에서는 목적지향형 과제와 과정지향형 과제로 나누고, 실험에 영향을 미칠 수 있는 색상, 형태, 기술 요소 등을 배제하기 위하여 모형 사이트를 직접 제작하여 실제사이트와 비교 실험을 진행하였다. 이 실험으로부터, 사용자의 네비게이션 유형은 웹사이트의 타입보다는 태스크의 종류에 의한 영향을 받으며, 목적지향형 과제에서는 사이트의 정보구조에 의한 방식이, 과정지향형 과제에서는 직접 링크를 사용한 네비게이션 방식이 선호된다는 결과를 얻었다.

• 한국컴퓨터정보학회논문지
• /
• 제18권3호
• /
• pp.69-77
• /
• 2013

본 연구에서는 관람 전 사용자 평가를 통해 박물관 모바일 애플리케이션의 정보서비스에 대한 만족도를 비교하고, 사용성과 기능적 특성간의 상관관계를 검증했다. 빌바오 구겐하임과 미국자연사박물관 애플리케이션의 경우, 정보서비스와 기능적 특성에 대한 만족도, 관람 동기와 관람시 애플리케이션 사용에 대해 반응이 모두 높게 나타났다. 이는 사용자의 관심과 욕구를 반영될 수 있도록 모바일 애플리케이션이 직관적으로 설계 및 디자인되고, 감성적 인터페이스를 지향할 때 사용성이 상승된다는 것을 의미한다. 또한 사용성과 기능적 특성과의 상관관계를 분석한 결과, 비간섭적 특성과 개인화적 특성이 다른 기능적 특성에 비해 좀 더 유의미한 상관관계에 놓여 있었다. 본 연구를 통해 도출된 하나의 중요한 시사점은 모바일 해석 매체의 사용성은 엔터테인먼트적인 요소나 기술적 적용보다는 콘텐츠와 사용자 사이에서 발생하는 인터랙션과 사용자의 관심과 욕구가 반영될 수 있는 기능적 특성에 따라 좌우 된다는 것이다.

• 대한영양사협회학술지
• /
• 제9권4호
• /
• pp.326-335
• /
• 2003

This study was carried out to collect information to establish a framework for meal management and nutritional service for prevention of chronic degenerative disease in the industrial workers. We investigated the health concerned life-style, nutrient intakes, anthropometry and biochemical parameters in the male workers in Korea by work condition. Anthropometric parameters of height, weight, waist, hip and triceps skinfold thickness were measured and biochemical parameters including Urine pH, hemoglobin, blood glucose, total cholesterol, GOT, GPT, $\gamma$-GPT and blood pressure were determined for 101 subjects(50 office workers : 33.9yr, 51 laborers : 34.4yr). To assess the nutrient intakes and diet quality of workers, dietary intake was measured by one day 24-hour recall method. Result of anthropometric parameters of height(p<0.01), weight(p<0.05), hip(p<0.05), TSF(p<0.01) were significantly higher in office workers than in laborers. Biochemical parameters were not significantly difference in both of them. Average daily nutrient intakes of both groups was higher than the Korean RDA and report on 2001 National Health & Nutrition Survey. The calcium(p<0.01), iron(p<0.05), vitamin A(p<0.01), vitamin B1(p<0.01) and niacin(p<0.05) intakes in laborers were significantly higher than in office workers. Nutrition adequacy ratio(NAR), mean adequacy ratio(MAR) and index of nutritional quality(INQ) of laborers were higher than those of office workers. This results indicated that the onset possibility of chronic degenerative disease appeared higher in office workers. Therefore, meal menagement and nutritional service for prevention of chronic degenerative disease of industrial works needs to be more variant guidelines.

• The Journal of Advanced Prosthodontics
• /
• 제5권2호
• /
• pp.92-97
• /
• 2013

PURPOSE. All-ceramic crowns are subject to fracture during function. To minimize this common clinical complication, zirconium oxide has been used as the framework for all-ceramic crowns. The aim of this study was to compare the fracture strengths of two computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia crown systems: Lava and Digident. MATERIALS AND METHODS. Twenty Lava CAD/CAM zirconia crowns and twenty Digident CAD/CAM zirconia crowns were fabricated. A metal die was also duplicated from the original prepared tooth for fracture testing. A universal testing machine was used to determine the fracture strength of the crowns. RESULTS. The mean fracture strengths were as follows: $54.9{\pm}15.6$ N for the Lava CAD/CAM zirconia crowns and $87.0{\pm}16.0$ N for the Digident CAD/CAM zirconia crowns. The difference between the mean fracture strengths of the Lava and Digident crowns was statistically significant (P<.001). Lava CAD/CAM zirconia crowns showed a complete fracture of both the veneering porcelain and the core whereas the Digident CAD/CAM zirconia crowns showed fracture only of the veneering porcelain. CONCLUSION. The fracture strengths of CAD/CAM zirconia crowns differ depending on the compatibility of the core material and the veneering porcelain.

• 디지털융복합연구
• /
• 제19권12호
• /
• pp.469-475
• /
• 2021

이 연구의 목적은 OECD 주요 국가를 대상으로 장애인이 차별받지 않고 자유를 완전히 누릴 수 있는 사회적 인식인 장애에 관한 차별금지법의 요소를 비교하는 것이다. 이 연구는 Chopin 외(2018)의 국가보고서에서 제시하고 있는 장애에 관한 차별금지법 요소를 분석 틀로 활용하여, 장애에 관한 차별금지법과 장애를 포함하는 일반 차별금지법, 영국의 평등법, 캐나다의 인권법을 포함하여 분석하였다. 연구결과는 다음과 같다. 장애에 관한 차별금지법에서 '직접차별', '간접차별', '혐오', '단체의 소송대리 역할', '단체의 소송지원 역할', '불이익조치 금지' 법조항 모두를 충족한 국가는 오스트리아, 벨기에, 프랑스, 스웨덴으로 나타났다. 특히, 한국은 '단체의 소송대리 역할'과 '단체의 소송지원 역할'이 포함되지 않았고 '직접차별', '간접차별', '혐오', '불이익조치 금지'에 관한 법조항을 충족한 국가였다. 마지막으로 이 연구는 법 제도적인 보완을 제언하였다.

• 융합보안논문지
• /
• 제19권2호
• /
• pp.147-156
• /
• 2019

본 논문의 연구목적은 1950년대 이래 한반도에서 있었던 남북한 간 평화체제 구축을 위한 제안들과 협상중점을 과거와 '9.19 군사분야합의서'로 대변되는 현 문재인 정부의 조치들을 군비통제이론 측면에서 비교 분석하여 남북한 간 군비통제 추진방안을 제시하는 것이다. 이를 위해 현재까지 정립된 이론을 비교 분석하여, 최적의 분석의 틀을 정립하였다. 과거는 주로 1990년 9월 제1차 남북고위급 회담부터 2008년 1월 노무현 정부말기까지를 중점적으로 분석하였으며, 이를 현 문재인 정부에서 추진하고 있는 군비통제 정책과 비교 분석하였다. 그 결과 나타난 특징은 유럽과는 달리 남북한 군비통제 정책은 군사적 신뢰구축이 정치적 신뢰구축과 동시 병행적으로 추진된다는 것이었다. 이를 토대로 한반도 평화정착 과정에서 협의되어야 할 신뢰구축과 군비통제, 군축 추진전략을 제시하였다. 중요한 점은 나아가면 갈수록 군비통제의 필요성은 증대될 것이며, 통일정책과 상호 보완적으로 추진되어야 한다는 것이었다.

• 한국해양공학회지
• /
• 제35권1호
• /
• pp.50-58
• /
• 2021

The demand for eco-friendly energy is expected to increase due to the recently strengthened environmental regulations. In particular, the flow inside the pipe used in a cargo handling system (CHS) or fuel gas supply system (FGSS) of hydrogen transport ships and hydrogen-powered ships exhibits a very complex pattern of multiphase-thermal flow, including the boiling phenomenon and high accuracy analysis is required concerning safety. In this study, a feasibility study applying the boiling model was conducted to analyze the multiphase-thermal flow in the pipe considering the phase change. Two types of boiling models were employed and compared to implement the subcooled boiling phenomenon in nucleate boiling numerically. One was the "Rohsenow boiling model", which is the most commonly used one among the VOF (Volume-of-Fluid) boiling models under the Eulerian-Eulerian framework. The other was the "wall boiling model", which is suitable for nucleate boiling among the Eulerian multiphase models. Moreover, a comparative study was conducted by combining the nucleate site density and bubble departure diameter model that could influence the accuracy of the wall boiling model. A comparison of the Rohsenow boiling and the wall boiling models showed that the wall boiling model relatively well represented the process of bubble formation and development, even though more computation time was consumed. Among the combination of models used in the wall boiling model, the simulation results were affected significantly by the bubble departure diameter model, which had a very close relationship with the grid size. The present results are expected to provide useful information for identifying the characteristics of various parameters of the boiling model used in CFD simulations of multiphase-thermalflow, including phase change and selecting the appropriate parameters.

• International Journal of Computer Science & Network Security
• /
• 제22권7호
• /
• pp.332-346
• /
• 2022

Digital transformation represents one of the main obstacles facing several government, private, and non-profit sectors that help stabilize digital transformation in the Arabic region. One of the helpful ways to improve the level of freedom, productivity, and flexibility among employees to accept the BYOD approach is using their own devices to perform their work both in and outside the workplace. This study focuses to present the differences between the main three economic sectors, which represent the most important pillars of the economy in Saudi Arabia within the Kingdom's Vision 2030. BYOD also has great importance to the stakeholders for raising their awareness by expressing the implications, if the concept of BYOD is widely and correctly adopted. The study uses the diffusion of innovation (DOI) framework and quantitative analysis data to determine the main dimensions and important factors that help increase the awareness of the target audience. The number of participants in this study was 830, and the participants are mixing between the government, private, and non-profit sectors. The main findings showed a significant impact of several factors such as the importance of knowledge, ease of use, employee satisfaction, risk awareness, and attention to increase the level of acceptance in three main sectors study for using the BYOD approach widespread and professional use.

• Journal of Korea Trade
• /
• 제25권2호
• /
• pp.75-94
• /
• 2021

Purpose - This article will take the Korean manufacturing industry as an example to estimate Korea's global value chain status from the perspective of overall and sub-industry, hoping to provide a theoretical reference for Korean manufacturing to climb the global value chain. Design/methodology - Based on the WIOD data. The data is calculated by using MATLAB (2014a) coding. The data for 6 sectors are classified according to the International Standard Industrial Classification revision 3 (ISIC Rev. 3), the WIOD data are used to calculate and compare the position, participation and dynamics of the Korea, China and USA' manufacturing industry in the 1995-2016. Findings - The empirical results supported conclusions of the theoretical model. In the Korean GVC of electrical and optical sector, while stronger forward linkages than backward linkages to GVC are advantageous for an average advanced country, the benefits of downstream tasks are pronounced for non-advanced countries. And proved the correlation for an index to capture a country's upstream position or downstream position, it makes sense to compare that Korea's exports of intermediates in the same sector that are used by China and USA. Originality/value - The first is to re-examine the characteristics of South Korea's participation in global value chains under a more systematic and accurate theoretical framework, which provides a new empirical reference for related research; the second is to content covers of the manufacturing 6 sectors, so as to more completely describe the characteristics of Korean manufacturing's participation in global value chains; The value of this paper is providing empirical evidence of the effect of Korea's the GVC of manufacturing sectors. In the GVC of 6 sectors, first three have a higher position in the value chain and are in the upper middle and upper reaches of the GVC. The latter two have a low GVC position index, which has become the main sector that pulls down the overall position of Korea's manufacturing industry.