• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.35-44
• /
• 2018

Korea government aims to generate 20 percent of its electricity with clean, renewable energy by 2030, while reducing its reliance on fossil fuel and nuclear power plants. Technically, solar energy has resource potential that far exceeds the entire global energy demand. Solar energy industry has experienced phenomenal growth in recent years due to both technological improvements resulting in cost reductions and government policies for renewable energy development and utilization. Even though solar power generation has several advantages over other forms of electricity generation, the major problem is the requirement of land which is scarcely available in the local site and its cost. This study analyzes the available capacity of landing and floating solar plants for the case of chonnam province in korea. The results of design capacity show about 7.5GW for landing and 1.5GW for floating solar power plant. Also, with a purpose to comprehend intention-behaviour gap about acceptance of solar community, the solutions are suggested.

• Geophysics and Geophysical Exploration
• /
• v.16 no.1
• /
• pp.45-52
• /
• 2013

We developed a Impulse Response Measurement System, including hardware system and data analysis software, for non-destructive test of slab structure. And, we carried out impulse response measurements on the pavement to test performance of the system. In the field test, the developed system measured impulse response stably and showed parameters immediately. Test results showed that dynamic stiffness and average mobility varies significantly depending on the characteristics of the pavement materials. Some data showed anomalous values those reflect variations in pavement itself or subsurface ground. Developed system gives informations of conditions of slab structure easily and quickly. So, 2-D monitoring with the system will be helpful in maintaining various slab structures.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.153-158
• /
• 2018

Fundamental problems of e-commerce are exaggerated advertising of products, lack of trust in products or suppliers, and false reviews. As a solution, I have merged the concept of trust service embedded in social network service(SNS) with commercial domain to develop a new type of service called "Reliable SNS Commerce Service". The contents developed in this paper are as follows: first, online community functions for users to provide services; second, commerce functions; and third, functions for linking SNS and commerce. Through the reliability information presented in this paper, the seller provides more reliable and objective purchase information to the buyer about the sales items, thereby contributing to the sales by increasing the probability of the actual purchase. The buyer can purchase the higher-quality products with confidence. The service providers can gain the reputation as a reliable site for purchasing members. In conclusion, this paper provides a positive effect to all the participants, which will contribute to the development of a new commerce market and activation of electronic commerce.

• Ocean and Polar Research
• /
• v.29 no.4
• /
• pp.327-337
• /
• 2007

Plankton communities have close relationships with environmental changes in water columns. Thus, the use of plankton as a biological tool for assessing the marine ecosystem health may be effective. Major issue regarding coastal pollution has been usually recognized as phytoplankton blooms or red tides caused by the eutrophication, an increase in concentration of inorganic nutrients such as nitrogen and phosphorus. However, in order to understand the effects of the overall pollution on marine ecosystem, the organic pollutants as well as the inorganic nutrients should be also considered. For understanding the effects of the organic pollution, among the planktonic organisms, heterotrophic bacteria, heterotrophic flagellates and ciliates should be investigated. Generally, there are three approaches for assessing the marine ecosystem health using the plankton taxa or plankton communities. The first one is a community-based approach such as diversity index and chlorophyll a concentration which are common in analysis of the plankton communities. The second is an indiviual-based approach which is to monitor the pollution indicative species. This approach needs one's ability to identify the plankton to species level. The last approach is a bioassay of toxicity, which can be applied to the plankton. A pilot study in Masan Bay was conducted to assess the effects of the inorganic and organic pollution. In this article, a new approach using plankton communities was tentatively presented as a biological tool for assessing the ecosystem health of Masan Bay.

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.2
• /
• pp.193-208
• /
• 2005

The object of this study is to provide a framework of increasing the effectiveness of the R&D planning of experts in fisheries and the education of students with the theoretical background and analytical skills through the adoption of technology roadmapping process in the marine production industry. The study was conducted by fact-finding surveys and the response content for surveys obtained from each expert advisor in the field of fisheries and maritime affairs such as fishery industries, some government organizations and research institutes including the Ministry of Maritime Affairs and Fisheries (MOMAF), National Fisheries Research and Development Institute (NFRDI) and fisheries-related universities was analyzed. The major implementation tasks to effectively achieve the basic goals of technology roadmap for short and middle-term research and development in the fisheries production field are as follows: 1. Research in order to achieve the realization of community-based resource management fisheries or fishermen-oriented co-management fisheries with paradigm shift in fisheries management. 2. Research in order to derive the construction of cost reducing and manpower saving systems in fishery-related science, technology and engineering. 3. Research in order to create the high value-added fisheries products with a focus on the upgrading of processing, freezing and refrigerating facilities, the reduction of logistics costs and the minimization of distribution steps. 4. Research in order to achieve the realization and development of environmental-friendly fisheries and internationally competitive fisheries through restructuring the entire fishing industries, in particular, small-scale fisheries. 5. Research in order to achieve the effective utilization of fisheries resources with a new creation of clean and living marine environment by fisherman under the balanced management and protection of marine living resources and fishing grounds.

• Journal of Environmental Health Sciences
• /
• v.45 no.6
• /
• pp.622-629
• /
• 2019

Objectives: The occurrence of norovirus food poisoning in South Korea has been reported since 2003. This study was performed to investigate the characteristics of norovirus food poisoning outbreaks in Korea from 2006 to 2015 and to analyze the relationship between these outbreaks and climate factors. Methods: Data on norovirus food poisoning outbreaks were obtained from the Korea Ministry of Food and Drug Safety. Data on climate factors were obtained from the Korea Meteorological Administration. Frequency analysis and Pearson's correlation analysis were adopted for this study. Results: During the study period, norovirus was the greatest contributing factor of food poisoning outbreaks. Approximately half of the outbreaks of norovirus food poisoning occurred in winter. Average temperature, highest and lowest temperatures, precipitation, number of days with rainfall, and humidity all had a significant negative correlation with monthly number of outbreaks of norovirus food poisoning (p<0.05). Among these, the lowest and average temperature showed higher correlation coefficients. However, the sum of the outbreaks in spring and autumn was similar to that of winter, and more than one-third occurred in group meal-service settings, including school lunches. This was strongly assumed as the use of norovirus-contaminated groundwater for preparation of meals in some settings. Conclusion: The cold and dry of the winter season in Korea may assist the transmission of norovirus. Also, the use of groundwater in group meal service is suspected of inducing a larger scale of norovirus food poisoning. Both health authorities and community-based prevention and control measures are required to respond to these complex etiological outbreaks.

• Journal of Ecology and Environment
• /
• v.43 no.4
• /
• pp.364-375
• /
• 2019

Background: Ecologists continue to investigate the factors that potentially affect the pattern and magnitude of tree damage during catastrophic windstorms in forests. However, there still is a paucity of research on which trees are more vulnerable to direct damage by winds rather than being knocked down by the fall of another tree. We evaluated this question in a mixed hardwood-softwood forest within the Big Thicket National Preserve (BTNP) of southeast Texas, USA, which was substantially impacted by Hurricane Rita in September 2005. Results: We showed that multiple factors, including tree height, shade-tolerance, height-to-diameter ratio, and neighborhood density (i.e., pre-Rita stem distribution) significantly explained the susceptibility of trees to direct storm damage. We also found that no single factor had pervasive importance over the others and, instead, that all factors were tightly intertwined in a complex way, such that they often complemented each other, and that they contributed simultaneously to the overall susceptibility to and patterns of windstorm damage in the BTNP. Conclusions: Directly damaged trees greatly influence the forest by causing secondary damage to other trees. We propose that directly and indirectly damaged (or susceptible) trees should be considered separately when assessing or predicting the impact of windstorms on a forest ecosystem; to better predict the pathways of community structure reorganization and guide forest management and conservation practices. Forest managers are recommended to adopt a holistic view that considers and combines various components of the forest ecosystem when establishing strategies for mitigating the impact of catastrophic winds.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.1
• /
• pp.128-135
• /
• 2006

Steel slag (divided into electric arc furnace slag and convener slag) is being produced by millions of tons per every year in many industrial countries. About 6.5 million tonnes of steel slag is produced yearly as an industrial by-product in Korea. Generally natural aggregate is relatively stable and does not enter into complex chemical reactions with water. Unfortunately, however. steel slag aggregate contains a small amount of free lime. The hydration of free lime makes steel slag aggregate unstable and liable to expand. In this paper, firstly, several aging methods are used in order to decrease the volume expansion of electric arc furnace slag, that is stabilization. The volume expansion of electric arc furnace slag is formulated from the experiment. From the formula, the residual expansibility is predicted with immersion expansion. Compressive strength of concrete with electric arc furnace slag has relation with the residual expansibility in slag aggregate.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.47-53
• /
• 2007

The safe operation of high pressure pipe line systems is of significant importance. Leaks due to faulty operation from the pipelines can lead to considerable product losses and to exposure of community to dangerous gases. There are several leak detection methods, which have been recently suggested on pipeline network. The negative pressure wave detection technology, which has advantages of short time detection availability, accurate leaking location estimate capability and cost effective, is concentrated in this study. Theoretical analysis of the flow characteristics for leaking through a hole on the pipe wall has been performed by using CFD++, commercial CFD package. The results of 3-dimensional analysis near leaking hole confirm the occurrence of negative pressure wave and verify the characteristics of propagation of the wave which travels with speed equal to the speed of sound in the pipeline contents. For the application of long pipe line system. The method of 1-dimensional analysis has been suggested and verified with results of CFD++.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.27-32
• /
• 2018

Recently, diverse bio-growth and object production experience learning contents have been developed for AR-based storytelling. In this paper, we will develop a storytelling-based growth type content using 3D printer which can add interest in and motivation of experiential learning. It is possible to increase the value of the characters produced by 3D printer as they can be used as personal collections. The bio-growth type content enables the learners and users to experience the local culture, history, and tourism ecology, which can enhance the educational effect by promoting their understanding in a fun way. The purpose of this study is to develop an application for experiential learning contents which creates a virtual environment in an object smart device where you can experience the culture and ecology of a learning community, and then produce the output using the 3D printer to keep as a personal souvenir. The developed contents application for experiential learning can be utilized not only for students but also for tourists. It is expected to serve as a source for further development of various contents through 3D printing technology.