• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2643-2648
• /
• 2015

This paper analyzes the phenomenon of drain induced barrier lowering(DIBL) for doping profiles in channel of asymmetric double gate(DG) MOSFET. The DIBL, the important short channel effect, is described as lowering of source barrier height by drain voltage. The analytical potential distribution is derived from Poisson's equation to analyze the DIBL, and the DIBL is observed according to the change of doping profile to influence on potential distribution. As a results, the DIBL is significantly influenced by projected range and standard projected deviation, the variables of channel doping profiles. The change of DIBL shows greatly in the range of high doping concentration such as $10^{18}/cm^3$. The DIBL increases with decrease of channel length and increase of channel thickness, and with increase of bottom gate voltage and top/bottom gate oxide film thickness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1492-1499
• /
• 2019

This paper propose how to track the position of the observer to control the viewing zone using an adaptive parallax barrier. The pose is estimated using a Constrained Local Model based on the shape model and Landmark for robust eye-distance measurement in the face pose. Camera's correlation converts distance and horizontal location to centimeter. The pixel pitch of the adaptive parallax barrier is adjusted according to the position of the observer's eyes, and the barrier is moved to adjust the viewing area. This paper propose a method for tracking the observer in the range of 60cm to 490cm, and measure the error, measurable range, and fps according to the resolution of the camera image. As a result, the observer can be measured within the absolute error range of 3.1642cm on average, and it was able to measure about 278cm at 320×240, about 488cm at 640×480, and about 493cm at 1280×960 depending on the resolution of the image.

• Journal of Distribution Science
• /
• v.3 no.2
• /
• pp.121-142
• /
• 2005

We're living in a world of one global village. The globalization of business is acceleration as more companies cross national borders to find customers, materials and money. Many foreign companies and organizations are doing their business aggressively in Korea and many Korean companies and rushing into foreign market. When people communicate for business with someone from another culture, there could be difficult communication barriers to overcome resulting from differences in their values, beliefs, norms for behavior, expectations, attitudes and so on. To do successfully business, we need to understand culture background and communication style that is different from nation, race, language. Communication barriers stemming from cultural differences may vary. Largely, they can be divided into value system, non-verbal communication, and perception process. Value system can be divided into individualism versus group orientation, avoidance of uncertainty degree, power distance, and high- context culture versus low-context culture. Also non-verbal communication method and perception process may play decisive roles in communication effectiveness. Especially nonverbal communication barriers which sometimes play more important roles than the verbal parts are composed of eye contact, gesture, kinesics, proxemics, chronemics, paralanguage and language of color Cross-cultural communication affect business situation. I expect that if we understand cultural background, and then we overcome cross-cultural communication barriers. To overcome and to adapt inter-cultural business, we need to develope curriculum on the cross-cultural education which I will study in the next paper.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.1
• /
• pp.81-87
• /
• 2010

In this paper, we have fabricated $SiO_2$ oxidation thin films by HDP-CVD(high density plasma-chemical vapor deposition) method for passivation layer or barrier layer of OLED(organic light emitting diode). We have control and estimate the deposition rate and relative index characteristics with process parameters and get optimized conditions. They are gas flow rate($SiH_4:O_2$=30:60[sccm]), 70 [mm] distance from source to substrate and no-bias. The WVTR(water vapor transmission rate) is 2.2 [$g/m^2$_day]. Therefore fabricated thin film can not be applied as passivation layer or barrier layer of OLED.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.30-36
• /
• 2020

We demonstrated a successful fabrication of 4" Gallium Nitride (GaN)/Diamond High Electron Mobility Transistors (HEMTs) incorporated with Inner Slot Via Hole process. We made in manufacturing technology of 4" GaN/Diamond HEMT wafers in a compound semiconductor foundry since reported [1]. Wafer thickness uniformity and wafer flatness of starting GaN/Diamond wafers have improved greatly, which contributed to improved processing yield. By optimizing Laser drilling techniques, we successfully demonstrated a through-substrate-via process, which is last hurdle in GaN/Diamond manufacturing technology. To fully exploit Diamond's superior thermal property for GaN HEMT devices, we include Aluminum Nitride (AlN) barrier in epitaxial layer structure, in addition to conventional Aluminum Gallium Nitride (AlGaN) barrier layer. The current collapse revealed very stable up to Vds = 90 V. The trapping behaviors were measured Emission Microscope (EMMI). The traps are located in interface between Silicon Nitride (SiN) passivation layer and GaN cap layer.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.161-168
• /
• 2019

Traffic accidents in tunnel can lead to large traffic accidents due to narrow and dark road characteristics. Therefore, special care of the driver is required when is driving in a tunnel. However, accidents can happen at any time. In the event of an accident, a narrow road structure may lead to a second accident. Therefore, all facilities installed inside the tunnel should be allowed to minimize damage in the event of an accident. We confirmed the safety of the collision target through the action of the sedan, Sport Utility Vehicle (SUV) and truck when the vehicle crashed into a stairway installed on the tunnel emergency escape route, and when a concrete barrier or guard rail was installed in front of the stairway. The behavior of the vehicle has resulted in a total of three results: rollover or rollover, change of speed and angle of the vehicle after collision. The sedan and SUV were the most secure when colliding with the guardrail, but considering the truck as a whole, concrete barriers were judged to be the most suitable for minimizing damage from the first accident and reducing the risk of the second accident.

• International journal of advanced smart convergence
• /
• v.9 no.3
• /
• pp.260-271
• /
• 2020

Smartphones provide blind users with screenreader as an accessibility tool. However, blind users often experience difficulties accessing online shopping malls via smartphones due to their inconsistent and image-based layouts. To enable screenreader users to get access to the detailed information about products while they are shopping online, we have developed BarrierFreeShop, an accessible mobile shopping application for people with visual impairments. BarrierFreeShop has three accessibility features: (1) layout automation, (2) review summarization, and (3) optical character recognition. We conducted a user study with 80 participants with visual impairments where they were asked to use BarrierFreeShop for a month. The findings revealed the effectiveness of our app in terms of speed and post interview feedback. We have also discovered typical shopping experiences that participants had during the test. This research suggests that computer vision technologies can improve accessibility issues in online shopping malls. In addition, we have confirmed that extracting contents from images help people with visual impairments to get better access to product information.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.952-957
• /
• 2015

Recently, the interior permanent magnet (IPM) motors for electric vehicle (EV) traction motor are being extensively researched because of its high energy density and high efficiency. The traction motor for EV requires high power and high efficiency at the wide driving region. Therefore, it is essential to fully consider the characteristics of the motor from low speed to high-speed driving regions. Especially, when the motor is driven at high speed, a significant centrifugal force is applied to the rotor. Thus, the rotor must be stably structured and be fully endured at the critical speed. In this paper, aims to examine the characteristics of the IPM motor by adjusting the width of air-barrier according to the permanent magnet position which is critical in designing an IPM motor for EV traction motors and to conduct a centrifugal force analysis for grasping mechanical safety.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.386-396
• /
• 2013

A 10-Gbit/s wireless communication system operating at a carrier frequency of 300 GHz is presented. The modulation scheme is amplitude shift keying in incoherent mode with a high intermediate frequency (IF) of 30 GHz and a bandwidth of 20 GHz for transmitting a 10-Gbit/s baseband (BB) data signal. A single sideband transmission is implemented using a waveguide-tapered 270-GHz high-pass filter with a lower sideband rejection of around 60 dB. This paper presents an all-electronic design of a terahertz communication system, including the major modules of the BB and IF band as well as the RF modules. The wireless link shows that, aided by a clock and data recovery circuit, it can receive $2^7$-1 pseudorandom binary sequence data without error at up to 10 Gbit/s for over 1.2 m using collimating lenses, where the transmitted power is 10 ${\mu}W$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.506-508
• /
• 2008

In this work, we used impedance spectroscopy analysis to determine the effect of the $HfO_X$ treatment on the surface of ITO and to model the equivalent circuit for OLEDs. Devices with an ITO/Organic material/Al structure can be modeled as resistances and capacitances arranged in parallel or in series. The number of elements depends on the composition of the structure, essentially the number of layers, and the contacts.