• 제어로봇시스템학회논문지
• /
• 제13권11호
• /
• pp.1099-1105
• /
• 2007

In this paper, modified two-port time-domain passivity approach is proposed for stable bilateral control of teleoperators under time-varying communication delay. We separate input and output energy at each port of a bilateral controller, and propose a sufficient condition for satisfying the passivity of the bilateral controller including time-delay. Output energy at the master port should be less than the transmitted input energy from the slave port with time-delay, and output energy at the slave port should be less than the transmitted input energy from the master port with time-delay. For satisfying above two conditions, two passivity controllers are attached at each port of the bilateral controller. A packet reflector with wireless internet connection is used to introduce serious time-varying communication delay of teleoperators. Average amount of time-delay was about 190(msec) for round trip, and varying between 175(msec) and 275(msec). Moreover some data packet was lost during the communication due to UDP data communication. Even under the serious time-varying delay and packet loss communication condition, the proposed approach can achieve stable teleoperation in free motion and hard contact as well.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.336-341
• /
• 2004

In this paper, a hybrid stabilization approach involving both passivity observer/passivity controller and wave variables is addressed to stabilize a teleoperation system with fixed time delay. To guarantee the stability of master or slave side, passivity observer/passivity controller are applied. But, passivity observer/passivity controller cannot deal with communication delay, and thus even small communication delay cause the system to be unstable. To cope with this problem, wave variables are additionally employed to have robustness to fixed communication delays. To show the validity of our proposed approach, several computer simulation results are illustrated.

• International journal of advanced smart convergence
• /
• 제5권1호
• /
• pp.34-46
• /
• 2016

Networked Control System (NCS) has evolved in the past decade through the advances in communication technology. The problems involved in NCS are broadly classified into two categories namely network issues due to network and control performance due to system network. The network problems are related to bandwidth allocation, scheduling and network security, and the control problems deal with stability analysis and delay compensation. Various delays with variable length occur due to sharing a common network medium. Though most delays are very less and mostly neglected, the network induced delay is significant. It occurs when sensors, actuators, and controllers exchange data packet across the communication network. Networked induced delay arises from sensor to controller and controller to actuator. This paper presents an adaptive delay compensation process for efficient control. Though Smith predictor has been commonly used as dead time compensators, it is not adaptive to match with the stochastic behavior of network characteristics. Time delay adaptive compensation gives an effective control to solve dead time, and creates a virtual environment using the plant model and computed delay which is used to compensate the effect of delay. This approach is simulated using TrueTime simulator that is a Matlab Simulink based simulator facilitates co-simulation of controller task execution in real-time kernels, network transmissions and continuous plant dynamics for NCS. The simulation result is analyzed, and it is confirmed that this control provides good performance.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권3호
• /
• pp.43-51
• /
• 2023

Slotted ALOHA (S-ALOHA) is a classical medium access control protocol widely used in multiple access communication networks, supporting distributed random access without the need for a central controller. Although stability and delay have been extensively studied in existing works, most of these studies have assumed ideal channel conditions or independent fading, and the impact of time-correlated wireless channels has been less addressed. In this paper, we investigate the queueing delay performance in S-ALOHA networks under time-correlated channel conditions by utilizing a Gilbert-Elliott model. Through simulation studies, we demonstrate how temporal correlation in the wireless channel affects the queueing delay performance. We find that stronger temporal correlation leads to increased variability in queue length, a larger probability of having queue overflows, and higher congestion levels in the S-ALOHA network. Consequently, there is an increase in the average queueing delay, even under a light traffic load. With these findings, we provide valuable insights into the queueing delay performance of S-ALOHA networks, supplementing the existing understanding of delay in S-ALOHA networks.

• 한국시뮬레이션학회논문지
• /
• 제13권2호
• /
• pp.1-12
• /
• 2004

This paper estimated the arrival angle and electric wave delay time using the space method law and the directions of arrival (DOA) estimation algorithm in case of signal correlation. Space method law is the method used to repress cross correlation before applying the weight value to the receiving signal. The values of the diagonal elements in the correlation matrix were averaged to replace as the diagonal elements value. In the area of wireless communication or mobile communication, there are high correlations in case of low delay time difference in multiple waves. This causes the quality of the communication to drop due to interference with the desired signal elements. This paper estimated the arrival angle and electric wave delay time using the space method law and the MUSIC algorithm. With the arrival angle algorithm, the arrival angle cannot be estimated below 5 in case of signal correlations because the angle resolution capacity decreases accordingly. The super resolution capacity was estimated to determine the arrival angle below 5 in this paper. In addition, the proposed algorithm estimated the short delay time difference to be below 20ns.

• Journal of information and communication convergence engineering
• /
• 제3권3호
• /
• pp.119-121
• /
• 2005

This paper aims to estimate the delay time of multiple signals in a multi-path environment. It also seeks to carry out a comparative analysis with the existing delay time under the proposed algorithm to develop a new algorithm that applies the space average method in a MUSIC algorithm. Unlike the existing delay time estimation algorithm, the developed algorithm was able to estimate the delay time in 5ns low. Therefore, the algorithm proposed in this paper improved the existing delay time estimated algorithm.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 1호
• /
• pp.351.1-355
• /
• 1998

Network-based real-time multimedia applications require guaranteed performances of communication service. Also according to increased bandwidth and processing performance in the future high speed networks, it is possible to make multimedia real-time applications such as distributed real-time applications including video conference, medical imaging, and video education. These applications have characteristics of stringent performance requirements in terms of delay, delay jitter and maximum loss rate. This paper proposes a new delay control for Broadband networks with FCFS queueing. The delay control provides an alternative solution to a current problem in real-time communication; traffic distortion, which makes it difficult to meet such real-time requirements. In simulations, it shows that the proposed delay control can guarantee local and end-to-end delay.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.40.1-40
• /
• 2001

In this paper, control theoretic approaches are proposed to guarantee QoS (Quality of Series) such as packet delay and packet loss of real-time traffic in high-speed communication network. Characteristics of variable rate real-time traÆc in communication networks are described. The mathematical model describing networks including source and destination nodes are suggested. By a traffic control mechanism, it is shown that worst-case end-to-end transfer delay of traffic can be controlled and packet loss can be prevented. The simulation shows results of delay control and buer level control to raise QoS in realtime traffic.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.572-578
• /
• 2017

사용자가 원격으로 가상환경에 접속하여 가상물체를 조작할 때 현실감을 증강시키기 위해서 햅틱 시스템이 사용된다. 그러나 원격 시스템 환경에는 통신시간지연이 발생하며, 발생된 통신시간지연은 햅틱 시스템을 불안정하게 만들 수 있다. 본 논문에서는 종래의 샘플-홀드 방식인 영차홀드 (ZOH; Zero-Order-Hold)가 아닌 일차홀드 (FOH; First-Order-Hold)를 포함하는 햅틱 시스템에서 시뮬레이션을 통해 통신시간지연과 햅틱 장치의 물성치 변화에 따른 가상 스프링상수의 안정성 영역을 분석하고 이를 통해 안정적인 햅틱 시스템을 구현하고자 한다. 통신시간지연이 없으면 일차홀드 (FOH) 방식이 영차홀드(ZOH) 방식보다 가상 스프링상수의 안정성 영역을 증가시킬 수 있었다. 그러나 통신시간지연이 증가하면, 샘플-홀드 방식보다 통신시간지연이 시스템 안정성에 더 큰 영향을 끼치므로, 샘플-홀드 방식에 따른 가상 스프링상수의 안정성 영역 크기에는 차이가 없어진다. 또한 통신시간지연과 일차홀드 방식이 포함되면 가상 스프링상수의 안정성 영역은 통신시간지연 크기에 반비례하고, 햅틱 장치의 댐핑상수 ($B_d$)에 정비례하여 증가하지만, 햅틱 장치의 질량 ($M_d$)에는 영향받지 않음을 알 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제14권11호
• /
• pp.1124-1129
• /
• 2008

Recently, two-port time-domain passivity approach was modified for time-varying communication delay. The newly proposed approach could achieve stable teleoperation even under the serious time-varying delay and packet loss communication condition. However, after some operation hour, the accumulated energy difference between the input energy from one port and the output energy at the other port caused unstable behavior until the passivity controller is activated. Resetting scheme is introduced for solving this problem, and stable bilateral teleoperation can be guaranteed without worrying about the accumulated energy difference.