• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.108-111
• /
• 2003

The Objective of this work was to design Surface Antenna Structure (SAS) and investigate fatigue behavior of SAS that was asymmetric sandwich structure. This term, SAS, indicates that structural surface becomes antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, SSFIP elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.5 GHz and final demonstration article was $16\;{\times}\;8$ array antenna. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue life curve of SAS was obtained. The fatigue load was determined experimentally at a 0.75(1.875kN) load level. SAS concept is the first serious attempt at integration for both antenna and composite engineers and promises innovative future communication technology.

• 한국통신학회논문지
• /
• 제30권6C호
• /
• pp.481-489
• /
• 2005

In this letter, we propose an efficient training sequence structure for adaptive linear multiuser detectors in space-time block coded multiuser systems, by exploiting a particular property of the minimum mean square error multiuser detectors used in these systems. The proposed structure wastes less overall system capacity than the straightforward training structure, without any corresponding loss of performance, as confirmed by the simulation results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.473-493
• /
• 2019

5G vehicular communication is one of key enablers in next generation intelligent transportation system (ITS), that require ultra-reliable and low latency communication (URLLC). To meet this requirement, a new hybrid vehicular network structure which supports both centralized network structure and distributed structure is proposed in this paper. Based on the proposed network structure, a new vehicular network utility model considering the latency and reliability in vehicular networks is developed based on Euclidean norm theory. Building on the Pareto improvement theory in economics, a vehicular network uplink optimization algorithm is proposed to optimize the uplink utility of vehicles on the roads. Simulation results show that the proposed scheme can significantly improve the uplink vehicular network utility in vehicular networks to meet the URLLC requirements.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.736-740
• /
• 1990

The communication structure in iron & steel plants are described. The specifications of the management network, the plant network and the field network are investigated. Data link methods between level 1, and level 2 are studied. Several network examples are illustrated.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.75-75
• /
• 2003

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.219-222
• /
• 2009

An efficient interpolation FIR filter structure for high-density and low-power electronic devices is proposed. The proposed structure is based on polyphase decomposition property and look-up table method. By computer-aided design simulations, it is shown that the use of the proposed method can result in reduction in the number of gates by 54% and can reduce power consumption by 9%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.588-590
• /
• 1997

In this paper, a highly reliable communication network for DCS in nuclear power plant is designed. The structure and characteristics of DCS in nuclear power plant is briefly explained. The features needed for a communication network for DCS in nuclear power plant is described. According to the abovo features, the layer structure of the communication network is determined and each layer is designed in detail.

• ETRI Journal
• /
• 제25권2호
• /
• pp.81-88
• /
• 2003

We designed a multimode interference (MMI) coupler to use in vertical coupling of double layered polymeric waveguides and analyzed the coupling characteristics by comparing our experimental and simulation results. We found that our proposed new structure, a stepped MMI coupler, is effective in vertical coupling between waveguide layers with a short length of MMI and has a high tolerance for the variation in the structure of an MMI coupler that can be induced as errors in the fabrication process.

• 산업공학
• /
• 제9권3호
• /
• pp.157-167
• /
• 1996

Due to the drastic technological innovation and introduction of various kinds, of new communication services, the structure and operation of communication networks are becoming complicated and diversified more and more. Accordingly, the necessity of flexible simulation tools which can be utilized for various performance evaluation jobs in various types of communication networks is growing. In this article, various existing simulation tools are briefly surveyed and the requirements for the simulator dedicated for the performance evaluation of communication networks are discussed. Then, a strategy to develop a simulator dedicated for the performance evaluation of communication networks is proposed. Our approach is based on the prototyping strategy, in which a relatively simple prototype structure is developed first and more functions are added whenever necessary. By following this strategy, a simulator can be developed and evolved in a timely manner at a relatively small cost.

• International Journal of Internet, Broadcasting and Communication
• /
• 제10권3호
• /
• pp.128-135
• /
• 2018

The various video recording device, like car black box and cctv, are used currently and video contents are used as evidence of traffic accidents and scenes of crime. To verify integrity of video content, there are various study on manipulated video content analysis. Among these studies, a study based on analysis of video file structure and its variables needs a tool which can be used to analyze file structure and extract interested attributes. In this paper, we proposed design and implementation of an analyzing tool which visualizes video file structure and its attributes. The proposed tool use a model which reflects commonality of various video container format, so it is available to analyze video structure with regardless of the video file types. And the tool specifies interested file structure properties in XML and therefore we can change target properties easily without modification of the tool.