• 한국군사과학기술학회지
• /
• 제18권1호
• /
• pp.46-54
• /
• 2015

Wargame simulators are widely used in the field of defence modeling and simulation. Because of increasing importance of communication effects on the warfare, the war game simulator is also required to reflect communication effects. One way to satisfy the requirement is the interoperation simulation between war game simulator and communication effect simulators. This paper shows the application of interoperation simulation between war game and communication effect simulators using HLA(High-Level Architecture)/RTI(RunTime Infrastructure). The war game simulator mainly deal with the engagement of troops and the troops communicate each other at the mission execution level. In the other hand, The communication effect simulator perform communication actions between the troops in the engineering level. Using the interoperation simulation, we can reflect the communication effects on the war game simulation. We show various applications of the interoperation simulation with the point of the war game and communication effect simulator. with a case study, we explain the interoperation simulation improves the reality and fidelity of the war game simulator and how the interoperation simulation can be applied to developing doctrines and real communication system.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권9호
• /
• pp.397-407
• /
• 2002

A new simulator which predicts the quantum effect in NMOSFET structure is developed. Using the self-consistent method by numerical method, this simulator accurately predicts the carrier distribution due to improved calculation precision of potential in the inversion layer. However, previous simulator uses analytical potential distribution or analytic function based fitting parameter Using the developed simulator, threshold voltage increment and gate capacitance reduction due to the quantum effect are analyzed in NMOS. Especially, as oxide thickness and channel doping dependence of quantum effect is analyzed, and the property analysis for the next generation device is carried out.

• 한국산학기술학회논문지
• /
• 제11권7호
• /
• pp.2528-2533
• /
• 2010

본 논문은 대방미사일(ARM: Anti Radiation Missile)로부터 레이다를 보호하기 위한 전파회피기술의 분석에 사용될 시뮬레이터 개발에 관한 것이다. 제시된 시뮬레이터는 전파회피를 위해 널리 사용되는 디코이(Decoy) 안테나의 효과적인 배치와 ARM 수신기에 수신되는 전파의 특성 분석이 가능하다. 그리고 디코이 안테나의 배치 효과를 검증하기위해 ARM 수신기에 도달하는 디코이 안테나 신호의 위상과 진폭을 분석하였다. 또한 다수 디코이 안테나를 사용하는 경우 ARM의 공격효과를 다양하게 분석하였으며 제안된 시뮬레이터는 ARM 방어를 위한 효과적인 디코이 배치에 유용하게 활용 될 것이다.

• 전기전자학회논문지
• /
• 제18권3호
• /
• pp.435-441
• /
• 2014

V2X 협력통신 시스템은 차량 운전을 쉽고 안전하게 할 수 있도록 도와주는 융합기술로 실제 교통상황에서 이러한 기술을 평가하고 효과를 예상하기 위해서는 실차 기반의 도로 구축과 통신 장비 구축, 검증 전문 인력 투입을 필요로 하며 많은 비용과 시간을 투입해야한다. 위와 같은 이유로 연구소 및 대학에서는 개발한 시스템을 테스트 하는데 어려움을 겪고 있으며, V2X 장비 개발이 가속화됨에 따라 차량 안전 어플리케이션과 V2X 통신기술을 테스트 할 수 있는 신뢰성 있는 테스트베드 구축에 대한 필요성이 증가하고 있다. 본 논문에서는 위와 같은 문제점들을 해결하기 위해 시뮬레이션을 기반으로 하는 테스팅 환경을 구성하기 위하여 External 인터페이스 구현을 통하여 트래픽 시뮬레이터와 네트워크 시뮬레이터를 연동하는 시스템을 구현하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제21권1E호
• /
• pp.18-24
• /
• 2002

This paper discusses the development of an acoustic vector channel simulator for the performance analysis of an acoustic digital communication system. The channel simulator consists of transmission module, acoustic channel model, receiver, beamformer, and adaptive equalizer. The source signal (QPSK) is generated by the specified parameters. The transmitted signal generates multipath signals which have a different delay, amplitude and doppler frequency. The paper presents in details the approach to the performance analysis of an acoustic digital communication system according to the antenna structure and the various baseband signal processing techniques.

• 디지털산업정보학회논문지
• /
• 제10권1호
• /
• pp.73-79
• /
• 2014

In this study, the unmanned vehicle to develop a preliminary step, we were facilities for Automated Guided Vehicle (AGV) simulator is designed and implemented. Industry is increasingly the more advanced automation and management systems need to be efficient. These studies are at least 24-hour continuous unmanned vehicles and personnel can result in reduction of labor costs. In addition, safety accidents can be minimized in the industry as an effect of intelligent AGV is essential. This study is the initial step for the development of AGV. manufactured simulator to Simulation and drives the performance of the system is evaluated. The configuration of the simulator, ultrasonic sensors, infrared sensors, and using the obstacle were to follow a given path. In addition, two-way communication between the host computer and the main processor that was. communication method that IEE802.11 meets the standard is applied to high-speed wireless LAN systems, each of the sensor information is calculated. AGV having a drive shaft 4 of the four wheels are respectively independent structure. AGV's main processor is driven using a high-performance DSP, and the controller controls the steering device of the load could be significantly reduced.

• International journal of advanced smart convergence
• /
• 제8권4호
• /
• pp.200-206
• /
• 2019

In this study, we compared the VacCAD and VacSim^(Multi), commercial vacuum simulators, to verify the advantages of VacCAD's efficiency. It was emphasized on immediacy and simplicity of simulation modelling, and characteristics of the pump combinations, pumping down curves, and vacuum materials. First, usability of simulation mechanism was estimated through the modeling schematics and obtained simulation results of each employed simulator were compared to evaluate the applicability in practice. Simulation reliability of each simulator was also probed by comparing the pumping characteristics of commercially available high vacuum systems. In addition, the degree of tolerances on VacCAD was also investigated through pumping down analysis considering outgassing effect due to chamber material variations. The higher effectiveness and expediency of VacCAD than VacSim^(Multi) has been presented, and it was expected that the utilization of VacCAD in vacuum applications to be increased.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.217-223
• /
• 2023

In this study, we compared the VacCAD and VacTran, commercial vacuum simulators, to investigate the simulation applicability and efficiency as vacuum simulation software. It was verified on reliability and simplicity of simulation modelling, and characteristics of the pump combinations, pumping down curves, and employed vacuum materials. First, usability of simulation schematics was estimated through the modeling tools and the overall simulation characteristics of each simulator were compared to evaluate the applicability in practice. Simulation reliability of each simulator was also probed by comparing the pumping performance characteristics of commercial high vacuum system models. In addition, the degree of tolerances on both simulators was also evaluated through pumping down analysis considering outgassing effect due to chamber material variations. The higher effectiveness and expediency of VacCAD than VacTran has been presented, and it was also expected that the utilization of VacTan in vacuum applications to be increased due to the higher availability of modelling variations.

• 한국전자통신학회논문지
• /
• 제9권5호
• /
• pp.567-574
• /
• 2014

본 논문에서는 해상 무선 통신 시스템에 적용 가능한 모노폴 구조의 VHF 안테나를 설계 및 제작 하였다. 제안된 안테나는 모노폴 구조를 기본으로 원형 환 구조 그리고 미앤더 구조를 결합함으로서 VHF 대역에서 동작 가능하도록 설계하였다. 최적화된 파라메타를 얻기 위해 상용 툴(HFSS)을 사용하여 시뮬레이션 하였으며 안테나 성능에 민감하게 작용하는 파라메타를 찾아내서 최적화된 수치를 얻었다. 얻어진 최적화된 수치를 사용하여 제안된 안테나를 제작하였다. 측정결과, -10dB 임피던스 대역폭을 기준으로 VHF 대역을 만족하고 있음을 확인하였으며 원하는 대역에서 측정된 이득과 방사패턴의 특성을 얻었다.

• International journal of advanced smart convergence
• /
• 제5권1호
• /
• pp.34-46
• /
• 2016

Networked Control System (NCS) has evolved in the past decade through the advances in communication technology. The problems involved in NCS are broadly classified into two categories namely network issues due to network and control performance due to system network. The network problems are related to bandwidth allocation, scheduling and network security, and the control problems deal with stability analysis and delay compensation. Various delays with variable length occur due to sharing a common network medium. Though most delays are very less and mostly neglected, the network induced delay is significant. It occurs when sensors, actuators, and controllers exchange data packet across the communication network. Networked induced delay arises from sensor to controller and controller to actuator. This paper presents an adaptive delay compensation process for efficient control. Though Smith predictor has been commonly used as dead time compensators, it is not adaptive to match with the stochastic behavior of network characteristics. Time delay adaptive compensation gives an effective control to solve dead time, and creates a virtual environment using the plant model and computed delay which is used to compensate the effect of delay. This approach is simulated using TrueTime simulator that is a Matlab Simulink based simulator facilitates co-simulation of controller task execution in real-time kernels, network transmissions and continuous plant dynamics for NCS. The simulation result is analyzed, and it is confirmed that this control provides good performance.