• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.2
• /
• pp.61-66
• /
• 2003

The electromagnetic properties and thermal behavior of Mn-Zn ferrite cores used for the blocking filter in he Power Line Communication(PLC) application were investigated as the function of additives. The highest density and permeability of 4.98 g/㎤) and 8,221 respectively were obtained to the specimen with composition of MnO 24 mol%, ZnO 25 mol% and Fe$_2$O$_3$ 51 mol% added MnO$_3$ 400 ppm, SiO$_2$ 100 ppm and CaO 200 ppm since the uniform grains were organized and the microstructures were compacted through reduction of pores. The permeability was increased up to 13,904 as temperature of specimen increased to 11$0^{\circ}C$, however, it was decreased precipitously under 100 over 11$0^{\circ}C$. The exothermic behavior was observed in the frequency range from 1 kHz to 1 MHz that the maximum temperature of specimens became 102$^{\circ}C$ at 1 MHz. In the consequence, the Mn-Zn ferrite core developed by this research will maintain the stable electromagnetic properties since the temperature of ferrite core rose to 93$^{\circ}C$ in the range of 10 kHz to 450 kHz bandwidth qualified for PLC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1265-1270
• /
• 2011

Different wireless technologies have been developed for various mobile applications. To offer seamless service in next mobile communication systems, it needs handoff service between heterogeneous mobile access networks. A high data rate handoff call from WLAN to cellular mobile network can increase rapidly the blocking probability of BS of cellular mobile network. To solve this problem, this paper proposes a new handoff scheme based on user service profiles. The performances of the proposed scheme are evaluated using computer simulations.

• Journal of Korea Multimedia Society
• /
• v.16 no.12
• /
• pp.1403-1412
• /
• 2013

In the maritime ships or airplanes, users should utilize the satellite channel in orer to use web service. However, the satellite channel is costly and does not give users satisfied response time. In the ship, the users may receive plenty of extra data when they obtain internet news. The extra data may be unnecessary image and advertise. Therefore, they should pay unnecessary data usage charges as well. In this paper, we suggest a proxy model that solves the problem of cost and speed. The proposed proxy reduces the of data through the satellite link by image and advertising blocking, caching, image re-requesting functions. It's performance was tested by a real satellite communication.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.83-88
• /
• 2012

This paper studies the effects of wavelength conversion on self-healing optical networks. We examined the effects of wavelength conversion capability on the backup routing and the spare wavelength utilization. The efficiency of spare wavelength utilization is proportionally increased as the wavelength conversion capability increases, different from the call blocking probability for which about 30% of wavelength conversion capability shows nearly the same performance as full wavelength conversion capability. The spare resource utilization efficiency can be improved by using alternate routing and wavelength assignment algorithms.

• The KIPS Transactions:PartA
• /
• v.8A no.2
• /
• pp.157-166
• /
• 2001

A simulation package has been developed as an event-driven system that can handle the hardware configuration of STC104 and algorithm proposed in the sister paper of ‘Study on High Speed Routers(II).’After various STC104 topology of meshes, torus, and hypercubes are constructed using up to 512 switches, the performance of each topology has been analyzed under different message generation rate in terms of throughputs, latency, and packet blocking time. Modified multicast algorithms for STC104 have been proposed for STC104 after U-mesh and U-torus in order to overcome the multicasting difficulty because of the point-to-point communication method found in STC104. The performance of the multicast algorithms have been analyzed over meshes and torus configuration. Throughput gets higher in the order of mesh, torus, and hypercube. Throughput difference among topology were distinctive in the zone of high message generation rate. Latency and blocking time increased in the order of hypercube, torus, and mesh. U-mesh and U-torus of software multicast showed similar throughput, however, U-mesh peformed slightly better result. These algorithms showed eight to ten times better results compared to individual message pass for 90 destination nodes. Multi-link environment also showed better performance than single-link environment because multi-link network used the extra links for communication.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.578-587
• /
• 2012

One of the key elements in the emerging, packet-based long term evolution (LTE) cellular systems is the deployment of multiple femtocells for the improvement of coverage and data rate. However, arbitrary overlaps in the coverage of these femtocells make the handover operation more complex and challenging. As the existing handover strategy of LTE systems considers only carrier to interference plus noise ratio (CINR), it often suffers from resource constraints in the target femtocell, thereby leading to handover failure. In this paper, we propose a new efficient, multi-objective handover solution for LTE cellular systems. The proposed solution considers multiple parameters like signal strength and available bandwidth in the selection of the optimal target cell. This results in a significant increase in the handover success rate, thereby reducing the blocking of handover and new sessions. The overall handover process is modeled and analyzed by a three-dimensional Markov chain. The analytical results for the major performance metrics closely resemble the simulation results. The simulation results show that the proposed multi-objective handover offers considerable improvement in the session blocking rates, session queuing delay, handover latency, and goodput during handover.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.7
• /
• pp.827-838
• /
• 1999

멀티미디어 통신에서 통신 성능에 관련된 요구 사항들은 QoS 매개 변수들로서 서술된다. QoS매개 변수들에서 중요한 매개 변수 중의 하나가 전송 신뢰성이다. QoS 매개 변수로서의 신뢰성은 오류 감지, 보고 그리고 정정 기법으로 정의된다. 하지만 기존의 오류 제어 기법들은 멀티미디어 데이타의 통합된 관점을 고려하지 않았다. 그래서 우리는 MEC(multimedia-oriented error control)라고 명명된 오류 제어 기법을 제안하였다. 1 본 논문에서는 MEC기법의 성능을 조사 하였다. 성능평가 결과는 MEC기법이 기존의 오류 제어 기법보다도 낮은 전송지연(lower delay)과 호손율(blocking probability) 을 갖는다는 것을 볼 수 있었다. 결국 제안된 MEC기법은 수송 프로토콜에게 유연성과 높은 성능을 갖도록 해준다.Abstract Communication performance requirements are described as QoS parameters in multimedia communication. One of the important QoS parameters is the reliability of the transfer. As a QoS parameter, the reliability defines error detection, report and correction mechanisms. Conventional error control mechanisms, however, do not consider the integrated viewpoint of multimedia data. So we have proposed the MEC(multimedia-oriented error control). 1 In this paper, we have investigated the performance evaluation of the MEC. The results show that the MEC mechanism provides lower transfer delay and blocking probability than those of the conventional error recovery mechanism. Therefore, the proposed MEC mechanism makes the transport protocol have the flexibility and high performance.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.4
• /
• pp.100-106
• /
• 2006

We analyze a voice/data integrated traffic model of the cellular mobile communication system with hybrid guard channels for voice and handoff calls. In a multi-service integrated wireless environment, quality of service guarantee is crucial for smooth transportation of real time information. Real time voice traffic requires a guaranteed upper bounded on both delay and packet error rate, whereas data traffic does not. Voice traffic has high transmission priority over data packets. Thus one of the important problems is the design of admission control schemes which can efficiently accommodate the differential quality of service requirements. In this paper, a hybrid guard channel scheme is considered in which arriving calls are assigned channels as long as the number of busy channels in the cell is below a predetermined first threshold. When the number of busy channels reaches the first threshold, new originating data calls are queued in the infinite data buffer. Then reaches second threshold, only handoff calls are assigned the remaining channels and new originating voice calls are blocked. We evaluate the system by a two-dimensional Markov chain approach and generating function method and obtain performance measures included blocking probability and forced termination probability.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2755-2761
• /
• 2011

The purpose of this study was to analyze and improve the communication interferences in the wireless communication equipments of the CBTC applied to a model intelligence train control system. So far, train positions have been traced by the conventional fixed blocking system to control the operation of the trains, but the new CBTC system uses the on-ground location to transmit the train positions wirelessly to the ground control center continuously, so being more vulnerable to communication interferences. Although the researcher analyzed and improved such interferences in the communication equipments of the CBTC system, there remain more rooms for its improvement.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.12
• /
• pp.1099-1105
• /
• 2000

The interactive bicycle simulator presented in this paper consists of a Stewart platform manipulator, magneto-rheological steering and braking devices, and a visual simulator. To provide a rider with reality, these devices should be controlled in real-time and motions of the devices and the visual should be also synchronized. If any of the devices and the visual gets unsynchronized due to significant blocking of control signals, the reality of the simulator is no longer secured. This paper presents communication protocols that minimize the blocked time of the control processes to guarantee the synchronization. The protocols are designed based on IPC (InterProcess Communications) of QNX, TCP/IP, and serial communication. The performance of the designed communication protocols is evaluated with the implemented bicycle simulator, and found satisfactory.