• 한국전자파학회논문지
• /
• 제29권2호
• /
• pp.142-145
• /
• 2018

본 논문에서는 전원보드의 공통모드 노이즈 감쇠를 위한 디커플링 커패시터 회로를 효율적으로 시뮬레이션할 수 있는 구조분할 해석기법을 제시한다. 제시하는 구조분할 해석기법이 적용된 전원보드 설계에서는 보드를 두 부분으로 구조분할하였으며, 분할된 구조와 커패시터 회로의 임피던스 파라미터를 재결합하기 위한 방법을 제시하였다. 구조분할 해석기법을 적용함으로써 공통모드 노이즈 감쇠 시뮬레이션에 수행되는 시간을 46 % 이상 단축하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.470-473
• /
• 2004

This paper presents conducted emission noise measurement from electronic equipment in frequency range of 1 MHz up to 30 MHz by small loop antenna. Small loop antenna measurement method can measure common-mode (CM) and differential-mode (DM) component of the noise on a pair of power line at the same time. The CM and DM can be measured separately. The theory of this measurement method is introduced and analyzed. The measured results were compared with the conventional measurement by Line Impedance Stabilization Network (LISN) and result a good trend between those methods.

• ETRI Journal
• /
• 제35권5호
• /
• pp.827-837
• /
• 2013

In this paper, we present wideband common-mode (CM) noise suppression using a vertical stepped impedance electromagnetic bandgap (VSI-EBG) structure for high-speed differential signals in multilayer printed circuit boards. This technique is an original design that enables us to apply the VSI-EBG structure to differential signals without sacrificing the differential characteristics. In addition, the analytical dispersion equations for the bandgap prediction of the CM propagation in the VSIEBG structure are extracted, and the closed-form expressions for the bandgap cutoff frequencies are derived. Based on the dispersion equations, the effects of the impedance ratio, the EBG patch length, and via inductances on the bandgap of the VSI-EBG structure for differential signals are thoroughly examined. The proposed dispersion equations are verified through agreement with the full-wave simulation results. It is experimentally demonstrated that the proposed VSI-EBG structure for differential signaling suppresses the CM noise in the wideband frequency range without degrading the differential characteristics.

• 한국정보기술학회 영문논문지
• /
• 제9권2호
• /
• pp.1-14
• /
• 2019

This paper considers a multiple-input multiple-output (MIMO) power line communication (PLC) network where interference alignment (IA) technique is used to mitigate the interference that arises in multi-user networks. IA as a precoding technique requires perfect channel state information (CSI) to achieve maximum multiplexing gain. Due to the common-mode reception at the receiver ports, we assume imperfect CSI for the IA precoding design. Here, the CSI is quantized and sent via feedback to the transmit ports. For different levels of CSI quantization, we evaluate the performance of various IA algorithms via Monte Carlo simulations. Simulation results reveal the superior performance of the proposed scheme due to common-mode reception in IA MIMO PLC networks. It is shown that for a quantization level of 5 bits, the CM reception improves the sum-rate by up to 70%.

• 한국전자파학회논문지
• /
• 제9권4호
• /
• pp.552-559
• /
• 1998

Conducted noise in power line contains both the common mode(CM) and differential mode(DM) noise. These two modes of noise are caused by different noise sources and paths. Therefore, CM/DM noise must be deal with individually in EMI filter. In this paper the technique to separate power line noise is presented, which can be used to measure both the CM and the DM noise from total generated noise. Also, noise-separator is designed and experimental results showed 30 dB above of separation performance in 10 kHz~10 MHz.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.504-508
• /
• 2004

An EMC analysis of a switched mode power supply (SMPS) have been usually using unbalance circuit topologies and the major factor of disturbance is parasitic capacitance. We have proposed a balanced switching converter circuit, which is an effective way to reduce the common mode conducted noise. In this paper presents the relationship between common mode current and radiated field.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1891-1895
• /
• 2003

Switch-mode power supplies (SMPS) have become a major source of conducted electromagnetic interference (EMI) which is the combination between differential mode (DM) noise and common mode (CM) noise. This paper presents the conducted EMI reduction approach in flyback switched mode power supply by rerouting for circuit balance to reduce common mode noise. And differential mode noise can be reduce by adding $c_x$ capacitor across the input power line, and passive element to the gate drive of switching device MOSFET to slow down the switching times. This combination of our approach is the effective way to reduce the conducted EMI and it is also a cost effective for product design

• 전자공학회논문지S
• /
• 제35S권4호
• /
• pp.128-138
• /
• 1998

This paper describes a principle of the conducted noise separator which can separate the conducted noise to the common mode and differential mode(normal mode), and presents the transfer characteristics of the separator designed and manufactured. We separated the conducted noise generated from switched mode converter to the CM and DM conducted noise, and also analyzed the source and path of conducted noise in the converter by the conducted noise separator. Since we could easily get the characteristics of the CM and DM conducted noise by the separator, we could efficiently determine the contermeasures for the reduction of the conducted noise and establish the foundation of the systematic procedure for the design of low pass filter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.23-25
• /
• 2005

Infrared bolometer sensor's variation is detected by voltage drop between reference resistor and bolometer resistor in this architecture. One of the serious problems in this architecture is that these resistors value has a process variation. So common-mode level could be different from expectation in room temperature. Different common-mode level could lead to wrong output at the end of readout circuit. We suggest useful method to solve this problem. Difference correction using capacitor has reduced CM level difference to 86% for 1 $M\Omega$. bolometer and reference resistor's 10% variation.

• 사상체질의학회지
• /
• 제19권1호
• /
• pp.148-159
• /
• 2007

1. Objectives The purpose of this study was to investigate the correlation of Metabolic syndrome(MetS) and Intima-media thickness(IMT) of common carotid artery with Sasang constitution. 2. Methods 197 subjects who had taken health examinations and diagnosis of Sasang constitution from Jan 1, 2006 to Dec 31, 2006 at East-west health examination center of Kyung-Hee medical center were included and underwent B-mode ultrasonography for measurement of intima-media thickness of common carotid arteries. MetS was defined by the criteria of the criteria of the National Cholesterol Education Program Adult Treatment Panel III. 3. Results and Conclusions Mean intima-media thickness of common carotid artery was significantly higher in subjects with MetS compared with control subjects($0.070{\pm}0.017$ vs $0.063{\pm}0.014cm$) and a significant trend towards increased IMT was observed with increasing numbers of metabolic syndrome components(r=0.331, p=0.000). After adjustment for age and sex, IMT of common carotid arteries was significantly different among three constitutional groups (Soyangin:$0.065{\pm}0.015cm$, Taeumin:$0.068{\pm}0.016cm$, Soeumin:$0.056{\pm}0.010cm$), however, after adjustment for age, sex and existence of metabolic syndrome, there was no significant different. But, factor of Taeumin was the effective determinant of the increase of mean IMT of common carotid arteries.