• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.157-164
• /
• 2009

An efficient pipeline MDC Radix-4 FFT structure is proposed in this paper. Every stages in pipeline FFT structure consists of delay' commutator and butterfly. Proposed butterflies in front and rear stages utilize CORDIC and Common Sub-expression Sharing(CSS) techniques, respectively. It is shown that proposed butterfly structure can reduce the number of adders through sharing common patterns of CSD type coefficients. The Verilog-HDL modeling and Synopsys logic synthesis results that the proposed structure show 48.2% cell area reduction in the complex multiplication part and 22.1% cell area reduction in overall 256-point FFT structure comparison with those of the conventional structures. Consequently, the proposed FFT structure can be efficiently used in various OFDM systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1C
• /
• pp.119-128
• /
• 2004

In this paper, a low-power 8-point DCT structure is proposed using add and shift operations. Proposed structure adopts 4 cycles for complete 8-point DCT in order to minimize size of hardware and to enable high-speed processing. In the structure, hardware for the first cycle can be shared in the next 3 cycles since all columns in the DCT coefficient matrix are common except sign. Conventional DCT structures implemented with only add and shift operation use CSD(Canonic Signed Digit) form coefficients to reduce the number of adders. To reduce the number of adders further, we propose a new structure using common sub-expression sharing techniques. With this techniques, the proposed 8-point DCT structure achieves 19.5% adder reduction comparison to the conventional structure using only CSD coefficient form.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.283-290
• /
• 2004

In this paper, a low-power structure for 512 tap FIR filter in MPEG audio algorithm is proposed. By using CSD(Canonic Signed Digit) form filter coefficients and maximum sharing of input signal sample, it is shown that the number of adders of proposed structure can be minimized. To minimize the number of adders, the proposed structure utilizes the 4 steps of sharing, i.e., common input sharing, linear phase symmetric filter coefficient sharing, block sharing for common input, and common sub-expression sharing. Through Verilog-HDL coding, it is shown that reduction rates in the implementation area and relative power consumption of the proposed structure are 60.3% and 93.9% respectively, comparison to those of the conventional multiplier structure.

• Knowledge Management Research
• /
• v.12 no.4
• /
• pp.17-40
• /
• 2011

This study examines the differences of enacting models and influential causes of benefit-sharing practices between Korean automobile networks and the Japanese networks. The case study method is chosen for this research because only small numbers of supply networks adopt benefit-sharing practices. I employ semi-structured interviews with managers from four automobile manufacturers and eight of their suppliers in South Korea and Japan. I find that Japanese automobile networks have adopted a higher level of trust-demanding, with a higher level of value-creating models such as supplier development, joint-new-product development. Whereas, the Korean networks have adopted the lower trust demanding, also less profitable models such as supplier's suggestion and buyer's suggestion. In terms of work-related cultural values, I find that Japanese networks emphasized collectivism. Both buyers and suppliers in the Japanese networks are supposed to have common causes. In contrast, Korean networks emphasized individualism. Both buyers and suppliers of Korea generally do not identify that they are common group members with a common cause. I also find that a slight differences of the enacting models and the causes between foreign-owned networks and domestic-owned networks within each country. Foreign-owned networks have adopted lower trust demanding, also less profitable models. The findings demonstrate that the cultural values have a decisive influence on the adoption of benefit sharing models for the networks in Japan, and South Korea.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.445-448
• /
• 2008

The key establishment between nodes is one of the most important issues to secure the communication in wireless sensor networks. Some researcher used the probabilistic key sharing scheme with a pre-shared key pool to reduce the number of keys and the key disclosure possibility. However, there is a potential possibility that some nodes do not have a common share in the key pool. The purpose of this paper is to devise a peer to peer key sharing protocol (PPKP) based on Quorum system and Diffie-Hellman key exchange scheme (DHS). The PPKP establishes a session key by creating a shared key using the DHS and then scrambles it based on Quorum system to secure that. The protocol reduces the number of necessary keys than the previous schemes and could solve the non-common key sharing possibility problem in the probabilistic schemes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1867-1875
• /
• 2011

In this paper, a low-area 256-point FFT structure is proposed. For low-area implementation CSD(Canonic Signed Digit) multiplier method is chosen. Because multiplication type should be less for efficient CSD multiplier application to the FFT structure, the Radix-$4^2$ algorithm is chosen for those purposes. After, in the proposed structure, the number of multiplication type is minimized in each multiplication block, the CSD multipliers are applied for implementation of multiplication. Furthermore, in CSD multiplier implementation, cell-area is more reduced through common sub-expression sharing(CSS). The Verilog-HDL coding result shows 29.9% cell area reduction in the complex multiplication part and 12.54% cell area reduction in overall 256-point FFT structure comparison with those of the conventional structure.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.329-339
• /
• 2016

Owing to mismatched feeder impedances in an islanded microgrid, the conventional droop control method typically results in errors in reactive power sharing among distributed generation (DG) units. In this study, an improved droop control strategy based on secondary voltage control is proposed to enhance the reactive power sharing accuracy in an islanded microgrid. In a DG local controller, an integral term is introduced into the voltage droop function, in which the voltage compensation signal from the secondary voltage control is utilized as the common reactive power reference for each DG unit. Therefore, accurate reactive power sharing can be realized without any power information exchange among DG units or between DG units and the central controller. Meanwhile, the voltage deviation in the microgrid common bus is removed. Communication in the proposed strategy is simple to implement because the information of the voltage compensation signal is broadcasted from the central controller to each DG unit. The reactive power sharing accuracy is also not sensitive to time-delay mismatch in the communication channels. Simulation and experimental results are provided to validate the effectiveness of the proposed method.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.65-72
• /
• 2018

In this paper, we have studied how to reuse common data link software by applying software product line engineering. Existing common data link software performed different stages of design, implementation, and testing without sharing the accumulated knowledge of different developers. In this situation, developers agreed that sharing the assets of each project and reusing the previously developed software would save human and time costs. Even with the initial difficulties, the common Data Link is a continually proposed project in the defense industry, so we decided to build a product line. The common data link software can be divided into two domains. Among them, the initial feature model for the GUI software was constructed, and the following procedure was studied. Through this, we propose a plan to build a product line for core assets and reuse them in newly developed projects.

• The Journal of Fisheries Business Administration
• /
• v.51 no.2
• /
• pp.107-121
• /
• 2020

It is important to understand the factors in which fishing village experiences have on family relationships. The purpose of this study is to derive the variables related to the family stemmed from the analysis of previous studies, and to find and present common factors that specifically influence the fishing experience in the family relationship. Through this, we intend to find it out in addition to the visible results such as income and experience, it can be an effective policy as a means to improve family relations through mutual efforts and understanding among families in promoting fishing-related policies. As a result of the analysis of the study, two common factors that the fishing experience had on family relationships were extracted. The first common factor is 'mutual effort,' which results in trying for each other's emotions, communication, understanding, and unity. The second common factor is 'mutual sharing' so fishing experiences are generally related to each other in family relationships. It can be seen as a result of sharing the memories, pleasures, and bonds of the people.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.75-85
• /
• 2014

Existing car-sharing systems have difficulty meeting the demands of one-way trips and connecting to other sharing systems. Therefore, in this study, a multi-mobility sharing service management system that was able to meet the demands of the one-way and round-way trips and shared diverse transportation modes such as cars (electric car/gasoline car), electric motorcycles and bicycles was developed, and a field study was conducted in Kashiwa-no-ha, Kashiwa City and Nagareyama City, Chiba Prefecture, Japan. As a result of the field test, it was confirmed that this system supplied the one-way demands for 54.9% of total car trips and 43.9% of the user used multiple transportation modes by the common interface. In addition, this system contributed to reduce carbon dioxide emissions by sharing vehicles and using eco-friendly vehicles. The developed sharing system is expected to improve mobility by meeting more various types of traffic demand than existing car sharing systems.