• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.296-306
• /
• 2019

The flyback topology is being widely used in power adapters. The coupling capacitance between primary and secondary windings of a flyback transformer is the main path for common-mode (CM) noise conduction. A Y-cap is usually used to effectively suppress EMI noise. However, this results in problems in space, cost, and the danger of safety leakage current. In this paper, the CM noise behaviors due to the electric field coupling of the transformer windings in a flyback adapter with synchronous rectification are analyzed. Then a scheme with balance winding is proposed to reduce the CM noise with a transformer winding design that eliminates the Y-cap. The planar transformer has advantages in terms of its low profile, good heat dissipation and good stray parameter consistency. Based on the proposed scheme, with the help of a full-wave simulation tool, the key parameter influences of the transformer PCB winding design on CM noise are further analyzed. Finally, a PCB transformer for an 18W adapter is designed and tested to verify the effectiveness of the balance winding scheme.

• Quality Improvement in Health Care
• /
• v.2 no.2
• /
• pp.112-129
• /
• 1996

Background : A small number of high cost patients usually spend a larger proportion of scarce health resources. Aged, long-term care and readmitted patients usually belong to these high cost patient group. Among others, long length of stay and readmission can be reduced by checking its cause, and these are the areas needed most of quality improvement activity. Characteristics of high cost medical users between health insurance program and medical assistance program were reviewed. Methods : The inpatient claims of health insurance and medical assistance program were analyzed. Patients were divided by 6 groups; long-term, mid-term, short-term, readmitted, cancer and aged. We defined high cost patients as those who had spent one and half million won and over per 6 months. Characteristics of high cost patients for each group were reviewed. Results : medical assistance patients used much more resources than the insured members in the average hospital cost per case but less in daily hospital cost. The former had a longer length of stay and had much heavier diseases. Major diseases of both group were cancer, diseases of circulatory system and chronic degenerative diseases. Gallstone and schizophrenia were more in the insured program. However, pulmonary tuberculosis, asthma were more common among the medical assistance patients. Early readmission before 2 weeks were 28-30% of the total readmission. Readmission rate in the malignat neoplasm and renal failure were 80% and more. Q.A program should be installed to prevent unnecessary readmissions. Conclusion : Almost 30% of early readmissions and admissions due to complications and long length of stay should be reviewed carefully to keep cost down and to enhance the quality of hospital care.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.208-213
• /
• 2015

This study presents the estimation method for the optimal capacity of BESS(Battery Energy Storage System) in order to reduce the electric charges of common consumer. The daily optimal charge and discharge plan of BESS which satisfies the given constraints is established using linear programming through the change of rated output/rated capacity of the time that shows the electric charges in the highest reduced rate has been selected. There will be a problem to compare only reduced rate because the bigger the rated capacity, the more reduced rate is increased. Therefore, rated output/rated capacity of the time when the reduced amount of electric charges for a year is higher than the investment cost of BESS was selected.

• Korean System Dynamics Review
• /
• v.11 no.3
• /
• pp.33-59
• /
• 2010

South Korea has the defense burdensharing agreement with the United States in reference to the U.S. troops stationed in Korea since 1991, based on Special Measure Agreement(SMA). Due to the growth of Korea's economic power and the U.S. provision of the security environment on Korean penninsula, the U.S. government steadily demanded the rise of contributions to common defense from South Korea and South Korea accepted most of the U.S. requests without proper principles of negotiation concerning the cost sharing. This paper analyzes the systems of the Korea－U.S. cost sharing program through a systems thinking, that yields desirable results with a little effort. The three policy leverages are: 1) the development of negotiation principles; 2) the policy making closely linked with National Defense Reform Basic Plan; 3) the policy making with responsibility burdensharing than cost burdensharing. This paper findings will contribute to the developing the Korea－U.S. cost sharing program by providing policy－makers and policy-practitioners with systematic understanding and insight into the dynamics of the program. Also, this will enable the program to execute more effectively with a concrete formula.

• Journal of Korea Port Economic Association
• /
• v.20 no.2
• /
• pp.217-234
• /
• 2004

Information technology has been transforming the relationship between shippers and carriers, but an unresolved question remains: what is the relative importance to shippers of service versus cost benefits of e-logistics solutions? This research develops and empirically tests a model to determine how Internet-based logistical operations in international shipping impact on the relative importance of cost versus service benefits to shippers. Contrary to expectations, results show that shippers perceived cost benefits from well-designed web sites, undoubtedly a consequence of perceptions that multi-function portals with ease of access contributed to savings in time and money. Another result was the confirmation of the positive effects of cargo tracing and bill of lading issuance on service-related factors. Finally, this study draws attention to the need for improvements in on-line booking capabilities and development of a comprehensive common portal; issues that must be addressed for shipping lines to succeed in an increasingly competitive e-logistics market.

• Journal of the military operations research society of Korea
• /
• v.15 no.2
• /
• pp.147-159
• /
• 1989

This paper presents a formalized methodology for conducting cost-effectiveness analysis on the ROK Navy's maritime patrol aircraft. The methodology involves a Delphi method application for determining the group of appraisal variables as well as their weight values in the area of aircraft effectiveness analysis, Life-cycle costing was employed to produce cost in terms of present worth values of all costs that occur over the common 20-year life cycle. A wide range of experts was selected so that their opinions could be effectively collected and synthesized to form the framework of the effectiveness model. Such a model development strategy provides easy acceptance of the analysis result and assure fairness of the analysis.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.11a
• /
• pp.57-60
• /
• 2003

As the business dependency to information systems and the frequency of the large scale disasters increase, implementing the disaster recovery center has been a common practice. However, since there has been little quantitative decision method for the distance between the data center and the disaster recovery center, the distance decision has been commonly made by qualitative guidelines. In this research, the decision method for the optimal distance between the data center and the disaster recovery center is developed, using the cost analysis including the operation cost and the expected disaster cost. An illustrative numerical example is provided.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.6
• /
• pp.259-264
• /
• 2001

The electric utility industry around the world is undergoing a revolutionary transition from vertically integrated monopoly structures to a competitive structures. Competition in an open transmission access(OTA) makes the market participants access easily the transmission system in a non-discriminatory and equitable manner. The competitions of suppliers and customers make the electric market price change every hour. This paper presents a web program in the internet environment with a function of optimal power flow(OPF) calculation. The Web program gives the nodal marginal cost and the congestion charge using the shadow prices resulted from OPF. This web program is realized by a Perl and JAVA languages, and using the common gateway interface(CGI).

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1141-1144
• /
• 1999

GPIB-based measurement applications are common in every field of multi-instrument environment. Also personal computers and workstations play a key role in measurement ability to create cost-effective instrument control solutions. For simple data acquisition systems which are automated by GPIB interface, standard GPIB controllers add a little burden to the budget for DAQ. In this paper, we provide software and hardware construction methods for cost-effective custom-made GPIB controller boards both for controllers and instruments. This way of tailored configuration to suit a particular application of GPIB-based instrument control solution pays dividends in cost and flexibility for data processing management.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.59
• /
• pp.105-118
• /
• 2000

The rise in population and the increase of urbanization and industrial growth has resulted in an ever-increasing volume of municipal solid waste that must be regularly collected, transported, and ultimately disposed of. Therefore, over the last decade the public, commercial and legislative awareness of environmental issues has been increased dramatically on earth particularly some industrial countries which has a shortage of landfill capacity. A quality, cost and delivery lead-time are usually considered as the competitive factors for each industry. However, the concepts of environmental issue are emerging common terms and concerns more seriously. More attention than ever is being focused on the recycling and source reduction techniques to reduce the total volume of waste. Unfortunately, however, a shortage of landfill capacity and increasing disposal cost requests a fundamental solution about the environmental issue. That is the remanufacturing which allow manufacturers to minimize waste, production cost and to turn end-of-life product into a profitable product. The objectives of this research were to growth the remanufacturing system by suggesting issues and implementation methods for the remanufacturing. In order to accomplish these objectives, we introduced backgrounds of appearance and benefits of the remanufacturing.