• Journal of the Korean Society of Costume
• /
• v.60 no.7
• /
• pp.88-102
• /
• 2010

The research examines the characteristics of the sewing methods used for women's Jeogori in modern Korea. The results are following. In the 1920s sewing of shoulder parts was started, and in the 1930s sewing by hand had reduced by dissemination of sewing-machine, and in the 1940s the Som-jeogori declined by the matter of economic and sanitary issues. In the 1950s four-fold sewing emerged, and during the 1960s the gause-lined triple-layered Jeogori was in fashion, and in the 1970s the Ggaeggi-jeogori and much elaborated Jeogori became in vogue. The characteristics of the sewing methods are changed by following factors. First, the dissemination of sewing-machine in the 1930's enabled fast and precise sewing of Jeogori which reduced the rate of clothes mending and the production period. Second, by development of washing method, the dry cleaning became common, resulting cleaner washing and better preservation. Third, introduction of western clothes gave rise to modernized Han-bok which was changed into practical and simple one. Fourth, by the introduction of synthetic textile and industry development, Jeogori with no armhole line or right Seop line was made using wide selection of textiles. Fifth, in 1945~60s, women learned' good wife and wise mother' education and the use of sewing machine in school. The clothing lifestyle affected the sewing method's change, for example, clothes sewed strongly by sewing machine not to take clothes apart, and attaching button instead of Go-reum to save clothes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1104-1110
• /
• 2012

The inverted pendulum system is a common, interesting control problem that involves many basic elements of control theory. In the early, controls of stabilization for the inverted pendulum system were used classical methods like PD, PID controller. In recently, however, control methods based on modern and intelligent control theory are widely applied. The fuzzy logic controller which is often used in nonlinear control is a little too hard to design due to increasing fuzzy rules rapidly if the given system like inverted pendulum has many state variables. Also, in case the state variables are divided into two parts, two fuzzy controllers are needed in the control system. In this paper, the authors propose FCSC(Fuzzy Controller based on State variables Combination) that reorganized into two new signals depending on the physical meaning of the four state variables of the inverted pendulum system. The proposed method is applied to the inverted pendulum system and simulations are accomplished to illustrate the control performance.

• Journal of the Korean School Mathematics Society
• /
• v.13 no.1
• /
• pp.125-141
• /
• 2010

The aim of this paper is to develop a web-based Virtual Learning System for discrete mathematics learning using CAS (Computer Algebra System), The system contains a series of contents that are common between secondary und university curriculum in discrete mathematics such as sets, relations, matrices, graphs etc. We designed and developed web-based virtual learning contents contained in the proposed system based on Mathematia, webMathematica and phpMath taking advantages of rapid computation and visualization. The virtual learning system for discrete math provides movie lectures and 'practice mode' authored with phpMath in order to enhance conceptual understanding of each movie lesson. In particular, matrix learning is facilitated with conceptual diagram that provides interactive quizzes. Once the quiz results are submitted, Bayesian inference network diagnoses strong and weak parts of learning nodes for generating diagnostic reports to facilitate personalized learning. As part of formative evaluation, the overall responses were collected for future revision of the system with 10 university students.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.4
• /
• pp.91-98
• /
• 2011

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of mounting a quill system to lubricate cylinder parts for smoother operation. In order to apply the common-rail lubricating system to the developed cylinder lubricator as the second research stage, the quill system with a progressively quantitative distributor is improved in the electronically controlled quill system with an accumulating distributor. In this study, the effects of lubricator motor speed, plunger stroke and cylinder back pressure on oil feed rate, maximum discharge and delivery pressures are experimentally investigated by using the electronically controlled quill system with an accumulating distributor in the developed cylinder lubricator. It is found that the oil feed rate of the electronically controlled quill system with an accumulating distributor is larger than that of the quill system with a progressively quantitative distributor because of the increase of delivery speed and volume by changing the location of accumulator in the same experimental condition.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.604-610
• /
• 2007

Injection molding is the most common method of shaping plastic resins for manufacturing a variety of parts. This injection molding is accomplished by injection molding machines (IMM) which consists of a hewer, a reciprocating screw, barrel assembly, and an injection nozzle. The plastic resin is fed to the machine through the hopper and it should be heated to the target melting temperature, which depends on material properties, as closely as possible with very small temperature overshoot in the barrel. Since the barrel, which has temperature dependent specific heat and thermal conductivity in the operating temperature range, is heated by the several electric heater bands, it is not an easy task to control the temperature of the barrel owing to the interference of neighboring heaters and its material properties. Though PID controller with auto-tuning capability is widely adopted in the nm, the auto-tuning process should be carried out whenever the operating temperature is changed significantly. Recently, though the predictive controller is developed and shows good performance, it has drawbacks: 1. Since the heat transfer modeling process is very complicated and should be carried out again when the barrel is changed, it is somewhat inappropriate in the field. 2. The controller performance is not validated in whole operating temperature range. In this paper, cascade type simple PI controller with input restriction is proposed to find the possibility of controlling the barrel temperature in the whole operating temperature range. It is shown by experiment that the proposed controller shows good performance. This result can be applied to design of PI controller with auto-tuning capability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.799-807
• /
• 2014

This paper describes the development of an indoor locomotion assistive robot, Ball-Chair, comprising a novel drive system. This robot facilitates locomotion assistive operation in narrow spaces, in which common wheelchairs cannot move easily. The Ball-Chair has two main features: its structural feature and driving mechanism. The exoskeleton frames of the Ball-Chair have been designed with octagonal shapes resembling a circle, for minimizing its volume and weight. Additionally, all its driving parts (including the ball) are mounted within of the robot to enhance its safety. The Ball-Chair features a reverse ball-mouse driving mechanism comprising two driving omni-wheels in the x- and y-axes. By controlling the speed of each omni-wheel, a holonomic driving system that can facilitate omnidirectional locomotion has been achieved using only two wheels. The effective movement of the Ball-Chair in any direction within narrow indoor spaces was experimentally verified. The paper outlines the development procedure in detail.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.242-253
• /
• 1994

For the implementation of a Service Node, which is proposed in the companion paper to provide multiparty conference type sevices in the ISDN, we define some technical aspects such as connection control, service control procedure and control messages in this paper. Additional connection control procedures for the multiparty connections are annexed to the CCITT Rec. Q.931 and Q.764 for the ISDN subscriber and common channel interoffice signaling. A new set of service control procedures is also established according to the necessary service control functions. The messages for these procedures are formatted using user-to-user signaling parts of Q.931 and Q.763 messages not to affect on the existing signaling system. Some technical requirements of subscriber terminal for the multiparty services are also deduced.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.11-13
• /
• 2013

Background: Esophagus cancer, the third most common gastrointestinal cancer overall, demonstrates high incidence in parts of Iran. The counties of Iran vary in size, shape and population size. The aim of this study was to account for spatial support with Area-to-Area (ATA) Poisson Kriging to increase precision of parameter estimates and yield correct variance and create maps of disease rates. Materials and Methods: This study involved application/ecology methodology, illustrated using esophagus cancer data recorded by the Ministry of Health and Medical Education (in the Non-infectious Diseases Management Center) of Iran. The analysis focused on the 336 counties over the years 2003-2007. ATA was used for estimating the parameters of the map with SpaceStat and ArcGIS9.3 software for analysing the data and drawing maps. Results: Northern counties of Iran have high risk estimation. The ATA Poisson Kriging approach yielded variance increase in large sparsely populated counties. So, central counties had the most prediction variance. Conclusions: The ATAPoisson kriging approach is recommended for estimating parameters of disease mapping since this method accounts for spatial support and patterns in irregular spatial areas. The results demonstrate that the counties in provinces Ardebil, Mazandaran and Kordestan have higher risk than other counties.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.4
• /
• pp.217-224
• /
• 2010

Nowadays, people perform their tasks anywhere anytime using their mobile devices. For this reason, data synchronization (DS) between mobile devices and a central server has become one of the most essential technologies in mobile environments. Currently, several mobile DS protocols are proposed and used. However, the existing DS protocols cannot guarantee interoperability between them. To solve the problem, an embedded DS gateway has been developed in our previous study. The gateway runs on a Windows Mobile-based emulator. It converts data on a mobile device into common data specified by OMA DS standard protocol and vice versa. The embedded gateway has been built to support the OMA DS standard protocol. In order to verify that the embedded gateway conforms to the OMA DS standard protocol, two kinds of OMA conformance tests have to be conducted - interoperability test with an OMA DS-based server and conformance test with SCTS (SyncML Conformance Test Suit). In this paper, some parts of the gateway previously built are modified and the modified gateway is installed on a Windows Mobile-based smart phone. And the interoperability test and the conformance test with the SCTS are conducted. The results of the tests show that the embedded DS gateway operates properly on the Windows Mobile-based smart phone and that the gateway passes the tests, verifying its conformity to the OMA DS standard protocol. In addition, DS performance tests show that DS delay times between a real smart phone and a DS server increase gently as the number of DS data increases. In other words, the embedded DS gateway built in this paper can be used for a real smart phone at a reasonable performance cost.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1123-1130
• /
• 2004

In this paper, a technique is presented f3r the design of a structurally simple narrow-band orthomode transducer (OMT) operating at 12/14 GHz frequency bands. The proposed OMT has such a structure that a horizontally polarized wave incident on the circular waveguide of the common port is directed to the rectangular waveguide of the straight port, while the vertically polarized wave is directed to the rectangular waveguide of the side port. Firstly methods are developed f3r designing individual parts of the OMT based on the waveguide theory and the theory of impedance matching. Secondly based on developed methods the whole OMT structure is designed using a commercial electromagnetic field analysis software. The validity of the proposed design technique is confirmed by fabricating and testing the designed OMT.