• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.228-233
• /
• 2000

It is common to apply the technology of FPGA (Fie이 Programmable Gate Array) which is one of the design methods for ASIC(Application Specific IC)to the active components used in the data processing at the digital system of satellite aircraft missile etc for compact lightness and integration of Printed Circuit Board (PCB) In carrying out the digital data processing the FPGAs are designed for the various functions of the Process Control Interrupt Control Clock Generation Error Detection and Correction (EDAC) as the individual module. In this paper an FPGA chip for Single Error Correction and Double Error Detection (SEC-DED) for EDAC is designed and simulated by using a VLSI design software LODECAP.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.724-729
• /
• 2012

A fuzzy PID controller design method is proposed for precise robust control of DC-DC buck converters. The PID parameters are determined reflecting on the common control engineering knowledge that transient performances can be improved if the P and I gains are big and the D gain is small at the beginning. Different from the previous fuzzy control design methods, the proposed method requires no defuzzification module and the global stability of the proposed fuzzy control system can be guaranteed. The proposed fuzzy PID controller is implemented by using a low-cost 8-bit microcontroller, and simulation and experimental results are given to demonstrate the effectiveness of the proposed method.

• 정보보호학회지
• /
• 제19권4호
• /
• pp.59-64
• /
• 2009

정보보호 인증기술 연구센터는 초경량 저비용의 인증 원천 기술 개발, 통합 인증 시스템 개발, 정보가전 네트워크에서의 인증기술 개발 등 정보보호를 위한 인증기술을 개발하기 위하여 연구 개발을 진행해왔다. 또한, 공통평가기준(CC, Common criteria) 및 CMVP(Cryptographic module verification program)와 같은 보안성 평가에 관한 많은 연구 및 과제수행을 진행하였다. 특히 본 연구센터는 대학기관 중 국내 최초로 정보보호제품에 대한 CC인증 자문을 수행하였으며, 센터에 소속된 연구원들이 대학원생 최초로 수습 평가자 자격증을 취득하였다. 또한 2008년에는 지문인식 시스템 보호프로파일, 개방형 스마트카드 플랫폼 보호파일 등 총 6종의 보호프로파일을 개발하였다. 마지막으로 센터는 우수한 정보보호인력 양성을 목표로 다양한 지원 및 제도를 운영하였다. 그 결과 다수의 우수 연구논문 발표, 국내외 특허 출원 및 등록, 기술이전 및 우수인력 배출 등 당초 목표 이상의 실적으로 달성하였다. 향후 정보보호 인증기술 연구센터는 지금까지 구축된 인증기술 및 보안기술과 산학협력 네트워크 등을 기반으로 우리나라가 인증기술 및 정보보호 산업의 강국으로 자리잡는데 지속적으로 기여할 것으로 기대된다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.130-132
• /
• 2007

Recently, regulation for THD(Total Harmonic Distortion) such as IEC 61000-3-2, IEEE 519 is being reinforced about a product which directly connects to AC line in order to prevent distortion of common power source in electronic equipment and electrical machinery. In order to satisfy these regulations, conventional circuits were used two-stage structure attached power factor correction circuit at ahead of converter but this method complicate the circuit and then a number of element increases thereupon the cost of production rises. In this paper, we propose a high efficiency single-stage 300W PFC flyback converter, that improved power factor and efficiency than conventional two-stage power module.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1316-1323
• /
• 2016

Multilevel inverters (MLIs) have been preferred over conventional two-level inverters due to their inherent properties such as reduced harmonic distortion, lower electromagnetic interference, minimal common mode voltage, ability to synthesize medium/high voltage from low voltage sources, etc. On the other hand, they suffer from an increased number of switching devices, complex gate pulse generation, etc. This paper develops an ingenious symmetrical MLI topology, which consumes lesser component count. The proposed level dependent sources concoction multilevel inverter (LDSCMLI) is basically a multilevel dc link MLI (MLDCMLI), which first synthesizes a stepped dc link voltage using a sources concoction module and then realizes the ac waveform through a conventional H-bridge. Seven level and eleven level versions of the proposed topology are simulated in MATLAB r2010b and prototypes are constructed to validate the performance. The proposed topology requires lesser components compared to recent component reduced MLI topologies and the classical topologies. In addition, it requires fewer carrier signals and gate driver circuits.

• 품질경영학회지
• /
• 제41권4호
• /
• pp.693-708
• /
• 2013

Purpose: This study is to develop an evaluation model for analysis of CMMS Implementation status and provide CMMS advancement methods to maximize implementation effect through the evaluation model. Methods: After extracting common modules from CMMS packages and establishing evaluation standard for each module, then the evaluation standard is applied to 33 Korean companies for evaluating their own current implementation status. Results: Preventive maintenance and analysis information modules were considered the most vulnerable in Korean companies which have introduced CMMS packages. And the reason why preventive maintenance is vulnerable is that there is poor build-up of their own preventive maintenance standards. Conclusion: Korean companies which will introduce CMMS need to make preventive maintenance standards, and data of the materials and the equipment to improve the effectiveness in advance.

• 대한임베디드공학회논문지
• /
• 제7권5호
• /
• pp.219-226
• /
• 2012

The rises of the life index quality together with the medical technology improvement lead to a longer life expectancy. Then a better health care program, especially for elderly, is needed. The common health problems facing those senior citizens are changed from acute diseases to chronic diseases, such as diabetes, hypertension. Then u-Health takes center stage in medical industry. Although u- Health medical device manufacturers have been improving their instruments, these instruments still rely on proprietary technologies without fixed platform. Even if the interface has been provided by the manufacturer, there is no widely-accepted uniform data model to access data of various u-Health devices. IEEE 11073 is a standard attempting to unify the interfaces of all medical devices. In this paper we have proposed a conversion software platform that assures interoperability among medical devices for ubiquitous sensor network. This module uses in order to develop a standard platform of medical system.

• 산업기술연구
• /
• 제24권B호
• /
• pp.47-57
• /
• 2004

This study is aiming to obtain the pabulum of architectural planning about out-patient clinic department in armed force hospital with search. The discussion was about characteristic problems and differentiated planning characteristics of common general hospital, So the conclusion of research is as follows. In army medical facilities, Because of architectural standard of out-patient clinic department about scale of facilities and characteristic in each examination-part is unprepared, it may have to be readied. Out-patient clinic department was become plan to scale about whole 7~8% in hospital to SB hospital in 95 but was planed about 5% of whole scale from PS hospital in 97. When plan hospital, increase of equipment and increase of module size about bed for the convenience of patient or employees are judged for cause in hospital since 97 years than previous hospital in 95.

• International Journal of Advanced Culture Technology
• /
• 제5권2호
• /
• pp.54-62
• /
• 2017

Currently, falling to industrial field workers is causing serious injuries. Therefore, many researchers are actively studying the fall by using acceleration sensor, gyro sensor, pressure sensor and image information.Also, as the spread of smartphones becomes common, techniques for determining the fall by using an acceleration sensor built in a smartphone are being studied. The proposed method has complexity due to fusion of various sensor data and it is still insufficient to develop practical application. Therefore, in this paper, we use acceleration sensor module built in smartphone to collect acceleration data, propose a simple falling algorithm based on accelerometer sensor data after normalization and preprocessing, and implement an Android based app.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.175-179
• /
• 1997

As consumer's desire becomes various, agility of mold manufacturing is most important factor for competence of manufacturer. In common works to use commercial CAM system to generate tool path, some decision making process is required to produce optimal result of CAM systems. We propose tool selection procedures to aid the decision making process. The system provides available tool size for machining of design model part of injection mold die by analyzing sliced CAD model of die cavity and core. Also, the tool size information is used to calculate machining time. The system is developed with commercial CAM using API. This module will be used for optimization of tool selection and planning process.