• Journal of Digital Convergence
• /
• v.11 no.3
• /
• pp.175-180
• /
• 2013

To compete global marketplace, many firms are adopting product families to increase variety, satisfy customer requirements, shorten lead-times and reduce costs. The key to a successful product family is the platform from which it is derived. When designing product families, it is important to resolve the tradeoff between product commonality and distinctiveness. To measure the commonality within a product family, it is necessary to develop the commonality index. It utilizes different parameters such as the number of common components, their cost, their manufacturing processes and so on. This paper present a new product family assessment index using the benchmarking method and considering environmental performance called green product family index(GPFI). Through the comparison analysis between some previous developed commonality indices and GPFI, we verify the suitability and effectiveness. Eventually, the proposed a new green product family assessment index can be helpful to design and develop the environmentally conscious product families.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.35-38
• /
• 2014

Herein, we report on the preparation of red fluorescent Si nanoparticles stabilized with styrene. Nano-sized Si particles emit fluorescence under UV excitation, which could be used to open up new applications in the fields of optics and semi-conductor research. Unfortunately, conventional methods for the preparation of red fluorescent Si nanoparticles suffer from the lack of a fully-established standard synthesis protocol. A common initial approach during the preparation of semi-conductors is the etching of crystalline Si wafers in a HF/ethanol/$H_2O$ bath, which provides a uniformly-etched surface of nanopores amenable for further nano-sized modifications via tuning of various parameters. Subsequent sonication of the etched surface crumbles the pores on the wafer, resulting in the dispersion of particles into the solution. In this study, we use styrene to occupy these platforms to stabilize the surface. We determine that the liberated silicon particles in ethanol solution interact with styrene, resulting in the substitution of Si-H bonds with those of Si-C as determined via UV photo-catalysis. The synthesized styrene-coated Si nanoparticles exhibit a stable, bright, red fluorescence under excitation with a 365 nm UV light, and yield approximately 100 mg per wafer with a synthesis time of 2 h. We believe this protocol could be further expanded as a cost-effective and high-throughput standard method in the preparation of red fluorescent Si nanoparticles.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.34-39
• /
• 2011

Screen printing method is a common way to fabricate the crystalline silicon solar cell with low-cost and high-efficiency. The screen printing metallization use silver paste and aluminum paste for front and rear contact, respectively. Especially the rear contact between aluminum and silicon is important to form the back surface filed (Al-BSF) after firing process. BSF plays an important role to reduces the surface recombination due to $p^+$ doping of back surface. However, Al electrode on back surface leads to bow occurring by differences in coefficient of thermal expansion of the aluminum and silicon. In this paper, we studied the properties of mono crystalline silicon solar cell for rear electrode with aluminum and aluminum-boron in order to characterize bow and BSF of each paste. The 156*156 $m^2$ p-type silicon wafers with $200{\mu}m$ thickness and 0.5-3 ${\Omega}\;cm$ resistivity were used after texturing, diffusion, and antireflection coating. The characteristics of solar cells was obtained by measuring vernier callipers, scanning electron microscope and light current-voltage. Solar cells with aluminum paste on the back surface were achieved with $V_{OC}$ = 0.618V, JSC = 35.49$mA/cm^2$, FF(Fill factor) = 78%, Efficiency = 17.13%.

• Korean Journal of Veterinary Research
• /
• v.45 no.2
• /
• pp.215-221
• /
• 2005

Canine coronavirus (CCV) causes a mild gastroenteritis in dogs. The virus is highly contagious. Although the virus was isolated more than thirty years ago, canine coronavirus infection continues to be a widespread problem. Mixed infections with both CCV and canine parvovirus (CPV) are common. Four kinds of commercial killed CCV vaccines are available in Korea. All the commercial vaccines should pass the National Assay for Veterinary Biologicals prior to release. For the potency test of CCV vaccine, it is necessary to use CCV antibody free dogs. The test requires not only kennels but high cost. To develop easy, efficient and economic potency test method for killed CCV vaccine using laboratory animals, a series of experiments with rabbits and guinea pigs were carried out in this study. In the preliminary test, the guinea pigs showed better immune responses than rabbits. The guinea pig was also easy to manage. So guinea pig was selected for the potency test animals. When the guinea pigs were inoculated twice with one dose of vaccine intramuscuarly each, slower and a little lower SN antibody titers were induced in guinea pigs than in dogs (about 2 kg body weight Beagle strain) given the same posology as guinea pigs'. It was concluded that guinea pigs could be substituted for dogs in the potency test of killed CCV vaccine.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.1 no.2
• /
• pp.117-121
• /
• 2008

Prolotherapy can be defined as the injection of growth factors or growth factor production stimulants to grow normal cells or tissue. Even though it has been a controversal procedure for decades, it is currently gaining in popularity among many physicians. The term prolotherapy was coined by Hacket in the 1950s to imply proliferation of normal tissue at ligamentous and tendinous entheses. The procedure has been described by other terms, such as sclerotherapy, regenerative injection therapy, and stimulated ligament repair. Incomplete healing from sprains or strains is common and can lead to chronic pain, joint instability and laxity, and is a risk factor for the development of osteoarthritis. Prolotherapy is commonly used for these musculoskeletal conditions which are refractory to usual care therapies. The proliferant solution and technique varies according to physicial training and preferance. Commonly reported proliferants include 10% to 25% dextrose, P2G and sodium morrhuate. High resolution ultrasound imaging of musculoskeletal tissue is increasing in popularity because of patient tolerability, low cost, ability to visualize tissue in real time motion and superior resolution of highly organized tissue such as a tendon. This procedure can be introduced by ultrasound imaging and tissue growth and repair after this procedure in a tendon or a ligament can be documented with ultrasound.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.4
• /
• pp.240-247
• /
• 2013

The main aim of this study was to suppress the angular velocity against strong winds during storms and analyze the stability and performance of the phase plane method. The utilization of small-scale wind turbine system has become common in agriculture, houses, etc. Therefore, it is considered to be a scheme for preserving the natural energy or avoiding the use of fossil fuels. Moreover, settling small-scaled wind turbines is simpler and more acceptable compared to ordinary huge wind turbines. In addition, after converting the energy there is no requirement for distribution. Therefore, a much lower cost can be expected for small-scaled wind turbines. On the other hand, this system cannot be operated continuously because the small-scaled wind turbine consists of a small blade that has low inertia momentum. Therefore, it may exceed the boundary of angular velocity, which may cause a fault in the system due to the centrifugal force. The aim of this study was to reduce the angular velocity by controlling the stall factor. Stall factor control consists of two control methods. One is a shock absorber that is loaded in the junction of the axis of the blade of the wind turbine gear wheel and the other is pitch angle control. Basically, the stall factor itself exhibits nonlinear behavior. Therefore, this paper confirmed the feasibility of stall factor control in producing desirable performance whilst maintaining stability.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.6
• /
• pp.782-790
• /
• 2000

The mainly used polymeric material for the denture is PMMA because of its cost and easiness to handle. So it was widely used material among dentists for past decades. But the acrylic-based denture materials have several common weak points such as shrinkage after curing and lack of strength. In order to solve these problems, we adapted one of hybrid system using acrylic polymer and vinyloligosilsesquioxane(POSS). POSS, which is a well known expandable monomer during polymerization process, may eventually suppress volumetric shrinkage. And the hybrid system makes it possible for the polymer to be stable in various severe conditions. Eight different kinds of samples were designed and synthesized. Each samples were characterized with dynamic mechanical analyser(DMA) to confirm their thermodynamic properties, fractured to analyze the cross-sectional morphology of the samples. And elongation, flexural and impact tests were also executed to evaluate the mechanical properties of the samples. From the results, hybrid composites had well defined crosslinked network structure compared to the widely used denture materials, and the mechanical strength improved without changing any surface condition as increment with POSS ratio in hybrid system. Fractured morphology showed homogeneous surfaces in spite of mutli component system, therefore we can conclude that the adoption of the POSS brought the reinforcement of the denture resin.

• Journal of the Korean Home Economics Association
• /
• v.46 no.10
• /
• pp.133-146
• /
• 2008

This study investgates the factors influencing the levels of consumer satisfaction and life satisfaction of resident foreigners in Korea. The data were collected through a structured self-administered survey and 545 foreigners who lived in Korea for more than 3 months, with age over 20 participated as respondents. A research framework was formulated based on the resource constraint hypothesis and the study investigated the impact of information resource(human, media and internet information source) and consumer resource(monthly income, language ability and consumer proficiency) on the levels of consumer satisfaction and life satisfaction. The results from data analysis can be summarized as follows; First, analysis of consumer problems of resident foreigners in Korea indicated that resident foreigners recognize a burden for residence cost, food expense and education fee. Most of resident foreigners in Korea are found to use small local shops most often indicating they may experience adverse market environment due to resource constraint such as language or psychological barrier, and most of the respondents answered that the most often used payment method was cash. Furthermore, resident foreigners in Korea responded that lack of language service, lack of information provision, inability to use certain goods and services are the common cause of consumer dissatisfaction, as well as price and quality problems. Second, the level of consumer satisfaction (2.96 in 4.0) is higher than the level of life satisfaction (2.63 in 4.0). Third, the level of life satisfaction is significantly influenced by Korean language ability and the level of consumer satisfaction. The level of consumer satisfaction is by the media information source usage and consumer claim experience. Fourth, the level of consumer satisfaction is found to be the variable with the strongest causal relationship with the level of life satisfaction.

• Advances in pediatric surgery
• /
• v.6 no.1
• /
• pp.1-9
• /
• 2000

Despite of advances in perinatal management and treatment modalities congenital diaphragmatic hernia(CDH) remains a frustrating problem. Although the sheep has proven to be a reliable experimental model for the production of intrauterine CDH, the rabbit may have some advantages. These include lower cost, smaller body size, year-round availability, high number of fetuses per pregnancy, and short gestational period. To evaluate the feasibility of the rabbit model of CDH, twenty-seven pregnant New Zealand rabbits were utilized. Hysterotomy and an operative procedure for creating a diaphragmatic defect on gestational day 24 or 25, in two fetuses of each pregnant rabbit were performed. In one fetus of one cornu of the uterus, the left fetal diaphragm was excised through an open thoracotomy(DH group). In another fetus in the other cornu, CDH was created and the trachea clipped(Surgiclip, USSC, Norwalk, Conn., USA) (TL group). Delivery was by Cesarean section on 30 days of gestation. Among twenty- seven pregnant rabbits, 12 in the DH group and eight in the TL group were born alive. The most common herniated organ was the left lobe of the liver. In thee DH group, the lungs were hypoplastic with decreased lung weight/body weight ratio, reduced numbers of alveoli, thicker media of the pulmonary arteries, and immature alveoli. In TL group, the alveoli were more mature and did not differ from the control animals. In conclusion, (1) pulmonary hypoplasia develops in the fetal rabbit diaphragmatic hernia model and (2) simultaneous tracheal ligation prevents pulmonary hypoplasia.

• Biomedical Science Letters
• /
• v.25 no.4
• /
• pp.407-416
• /
• 2019

Recent years have seen an increase in the incidence of candidiasis caused by non-albicans Candida (NAC) species. In fact, C. glabrata is now second only to C. albicans as the most common cause of invasive candidiasis. Therefore, the rapid genotyping specifically for C. glabrata is required for early diagnosis and treatment of candidiasis. A number of genotyping assays have been developed to differentiate C. glabrata sequence types (STs), but they have several limitations. In the previous study, multi-locus sequence typing (MLST) has performed with a total of 101 C. glabrata clinical isolates to analyze the prevalent C. glabrata STs in Korea. A total of 11 different C. glabrata STs were identified and, among them, ST-138 was the most commonly classified. Thus, a novel probe-based quantitative PCR (qPCR) assay was developed and evaluated for rapid and accurate identification of the predominant C. glabrata ST-138 in Korea. Two primer pairs and hybridization probe sets were designed for the amplification of internal transcribed spacer 1 (ITS1) region and TRP1 gene. Analytical sensitivity of the probe-based qPCR assay was 100 ng to 10 pg and 100 ng to 100 pg (per 1 μL), which target ITS1 region and TRP1 gene, respectively. This assay did not react with any other Candida species and bacteria except C. glabrata. Of the 101 clinical isolates, 99 cases (98%) were concordant with MLST results. This novel probe-based qPCR assay proved to be rapid, sensitive, highly specific, reproducible, and cost-effective than other genotyping assay for C. glabrata ST-138 identification.