• Archives of Plastic Surgery
• /
• v.43 no.2
• /
• pp.204-209
• /
• 2016

Temporal hollowing occurs to varying degrees after pterional craniotomy. The most common cause of temporal hollowing is a bony defect of the pterional and temporal regions due to the resection of the sphenoid ridge and temporal squama for adequate exposure without overhang. The augmentation of such bony defects is important in preventing craniofacial deformities and postoperative hollowness. Temporal cranioplasty has been performed using a range of materials, such as acrylics, porous polyethylene, bone cement, titanium, muscle flaps, and prosthetic dermis. These methods are limited by the risk of damage to adjacent tissue and infection, a prolonged preparation phase, the possibility of reabsorption, and cost inefficiency. We have developed a method of temporal augmentation using a calvarial onlay graft as a single-stage neurosurgical reconstructive operation in patients requiring craniotomy. In this report, we describe the surgical details and review our institutional outcomes. The patients were divided into pterional craniotomy and onlay graft groups. Clinical temporal hollowing was assessed using a visual analog scale (VAS). Temporal soft tissue thickness was measured on preoperative and postoperative computed tomography (CT) studies. Both the VAS and CT-based assessments were compared between the groups. Our review indicated that the use of an onlay graft was associated with a lower VAS score and left-right discrepancy in the temporal contour than were observed in patients undergoing pterional craniotomy without an onlay graft.

• Journal of Sensor Science and Technology
• /
• v.29 no.5
• /
• pp.293-302
• /
• 2020

Food safety has emerged as a growing concern for human health in recent times. Consuming contaminated food may lead to serious health problems, and therefore, a system for monitoring food freshness that is both non-detrimental to the quality of food and highly accurate is required to ensure that only high-quality fresh food packages are provided to the customers. This paper proposes a method to monitor and detect food quality using a compact smart sensor tag. The smart tag is composed of three ultra-low-power sensors, which monitor four major indicators of food freshness: temperature, humidity, and the concentrations of ammonia and hydrogen sulfide gases. An RF energy scavenging circuit is integrated into the smart sensor tag to harvest energy from radio waves at a high frequency of 13.56 MHz to supply sufficient power to the tag. Experimental results show that the proposed energy harvester can efficiently obtain energy at a distance of approximately 40 cm from a 4 W reader. In addition, the proposed smart sensor tag can operate without any battery, thereby eliminating the requirement of frequent battery replacement and consequently decreasing the cost. Meanwhile, the freshness of preserved pork is continuously monitored under two conditions--room temperature and refrigerator temperature--both of which are the most common temperatures under which food is generally stored. The food-monitoring experiments are conducted over a period of one week using the proposed battery-less tag. Based on the experimental results, the food assessment is classified into four categories: fresh, normal, low, and spoiled.

• IE interfaces
• /
• v.11 no.3
• /
• pp.193-207
• /
• 1998

The agriculture and fishery share in the Korean GDP is continuously decreasing after 1960s. Furthermore the proportion of these industries in the GDP has diminished as low as 10 percent in recent years. However, the stockbreeding sector in these industries are considerably expanded. More than 50 percent of the whole farmhouses are involved in the livestock farming, and the stock farming portion is steadily increased in its size and scope. Thus, the mechanization and the automization of stockbreeding equipments are greatly required to reduce down production cost, as well as to win the competitiveness in the global market. From this aspect, developed in this paper is a stockbreeding management system (SMS) for dairy cattle, which can be used in small and medium sized dairy farms. First, the basic schema of the stockbreeding management system are addressed in view of stockbreeding management for individual dairy cattle. Electronic identification (EI) systems and sensory devices have changed stockbreeding management strategy from group stock control into individual stock control manner. The SMS receives stock body measurement data through the sensory devices such as weight, temperature, and milk conductivity meters. A common database then integrates those measuring data together so that the SMS can determine the appropriate solution on each stock's breeding such as feeding and milking. Thus, each stock can be supervised by a sophisticated SMS that provides the best solution to the stockbreeding throughout the stock's whole life-cycle. Secondly. six major submodules of the SMS, based on the EI and sensory devices, are proposed. They are individual stock management, disease management, health management, feeding management, milking management, and a propagation management submodule. Finally, a prototype system for the SMS is demonstrated. The system is developed using Delphi 2 client-server system run under the Windows 95 environment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.59-68
• /
• 1996

This study suggests that the management of bridge was developed data which supports to execute analysis a-bout bridge. Basically, it makes standardization that the item of management of bridge keeps the effective data management which demonstrates the designed database by graphic processing technic and development of pro-gram in database manipulation. As a result of this study, through the analysis of the management of bridge, we tried to make the acceptable management item standard and to design database. For the purpose of it, computer program and database design with analyzing current works, stable inspection processing demanding the management of bridge and taking adventage of them. In this study, we can get the minimuim cost of the management of bridge and keep maximum common usage. also we contribute to perform effective data management and management system of bridge.

• Clinical and Experimental Pediatrics
• /
• v.52 no.9
• /
• pp.1035-1037
• /
• 2009

Patent ductus arteriosus (PDA) is a common congenital heart defect. All PDAs, regardless of size or degree of symptoms, require occlusion. Transcatheter PDA occlusion features fewer complications than trans-thoracic closure. It is also more cost-effective and has an excellent occlusion rate. Therefore, transcatheter PDA occlusion is accepted as the standard treatment option for PDA. However, tubular-type PDAs are difficult to close with ordinary detachable coils or the Amplatzer Duct Occluder; thus, these lesions remain a challenge for transcatheter closure. We attempted to occlude a tubular-type PDA by using an oversized Amplatzer Vascular Plug, which allowed intraluminal packing of the ductus. By using this treatment method, PDA occlusion was achieved safely with an excellent final outcome. We suggest that this approach may be a good option for transcatheter closure of a tubular-type PDA.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.8 no.1
• /
• pp.26-30
• /
• 2015

There are many traumatic foot and ankle problems in orthopaedic fields. Though it is not life-threatening problems, a delay in accurate diagnosis and treatments can danger limb function and therefore correct diagnosis can prevent long-term complications. Achilles tendon rupture is relatively common injury for active sports people. Ultrasonography is cost-effective, irradiation -free, effective for evaluation of soft tissues and dynamic analysis. It has been growing importance in Achilles tendon rupture. Ultrasonography is a diagnostic tool in Achilles tendon rupture. Physical examination and patient history is needed to diagnose Achilles tendon without image, but it is missed up by 20% in private clinic. Discontinuity of normal fibrillar architecture seen on an ultrasonographic image is diagnostic for Achilles tendon rupture, and can be accentuated by the performance of dorsi-flexion and plantar flexion, while observing in real time. And ultrasonography is a reliable method for serial observation after surgical treatment or conservative treatment.

• Computers and Concrete
• /
• v.17 no.1
• /
• pp.1-27
• /
• 2016

Final construction project cost is significantly determined by construction rate. The Industrialized Building System (IBS) was promoted to enhance the importance of prefabrication technology rather than conventional methods in construction. Ensuring the stability of a building constructed by using IBS is a challenging issue. Accordingly, the connections in a prefabricated building have a basic, natural, and essential role in providing the best continuity among the members of the building. Deficiencies of conventional precast connections were observed when precast buildings experience a large induced load, such as earthquakes and other disasters. Thus, researchers aim to determine the behavior of precast concrete structure with a specific type of connection. To clarify this problem, this study investigates the capacity behavior of precast concrete panel connections for industrial buildings with a new type of precast wall-to-wall connection (i.e., U-shaped steel channel connection). This capacity behavior is compared with the capacity behavior of precast concrete panel connections for industrial buildings that used a common approach (i.e., loop connection), which is subjected to monotonic loading as in-plane and out-of-plane loading by developing a finite element model. The principal stress distribution, deformation of concrete panels and welded wire mesh (BRC) reinforcements, plastic strain trend in the concrete panels and connections, and crack propagations are investigated for the aforementioned connection. Pushover analysis revealed that loop connections have significant defects in terms of strength for in-plane and out-of-plane loads at three translational degrees of freedom compared with the U-shaped steel channel connection.

• The Journal of the Korea Contents Association
• /
• v.7 no.10
• /
• pp.10-18
• /
• 2007

Today, third-generation(3G) of mobile communication service executing the video and TV. And low cost, high speed data rate will emerge communication of the fourth generation(4G) in future. So, in this paper we studied occupied frequency bandwidth of common technique criteria among the technique criteria for the 4G mobile communication of FDD-based on Up/Down-link. The mobile communication traffic is predicted Up/Down-link of non-symmetric in future. So we proposed the PHY layer parameters of occupied frequency bandwidth of Up/Down-link with both 1:3 and 1:6. We also verified this through the simulation. We proposed the occupied frequency bandwidth for the 4G mobile communication in this paper.

• Nutrition Research and Practice
• /
• v.5 no.1
• /
• pp.40-45
• /
• 2011

Hemoglobin and zinc protoporphyrin (ZPP) tests are commonly used to screen for iron deficiency, but little research has been done to systematically evaluate the sensitivity and specificity of these two tests. The goal of this study was to evaluate the effectiveness of zinc protoporphyrin/heme (ZPP/H) ratio as a point-of-service screening test for iron deficiency among preschool-aged children by comparing the sensitivity and specificity of hemoglobin, ZPP/H ratio, and serum ferritin (SF). Also completed were assessments for the prevalence of anemia, iron deficiency (ID), and iron deficiency anemia (IDA) with indicators of ferritin models. This study was carried out with 95 children ages 3 to 6 y. Anthropometric measurements were assessed and blood samples were analyzed for hemoglobin, SF, transferrin saturation (TS), and ZPP. Anemia was common and the prevalences of anemia, ID, and IDA were 14.7%, 12.6%, and 5.2%, respectively. The ZPP/H ratio was strongly and significantly correlated with hemoglobin. And ZPP/H ratio was a more sensitive test for ID than hemoglobin or SF measurement, correctly identifying more than twice as many iron-deficient children (sensitivity of 91.7%, compared to 41.7% for hemoglobin and SF). However, ZPP/H ratio had lower specificity (60.2%, compared to 89.1% for hemoglobin or 96.4% for SF) and resulted in the false identification of more subjects who actually were not iron deficient than did hemoglobin or SF. Low hemoglobin concentration is a late-stage indicator of ID, but ZPP/H ratio can detect ID at early stages and can be performed easily at a relatively low cost. Therefore, ZPP/H ratio can serve as a potential screening test for pre-anemic iron deficiency in community pediatric practices.

• Journal of Biomedical Engineering Research
• /
• v.27 no.6
• /
• pp.392-401
• /
• 2006

Image Guided Surgery (IGS) system which has variously tried in medical engineering fields is able to give a surgeon objective information of operation process like decision making and surgical planning. This information is displayed through 3D images which are acquired from image modalities like CT and MRI for pre-operation. The technique of image registration is necessary to construct IGS system. Image registration means that 3D model and the object operated by a surgeon are matched on the common frame. Major techniques of registration in IGS system have been used by recognizing fiducial markers placed on the object. However, this method has been criticized due to additional trauma, its invasive protocol inserting fiducial markers in patient's bone and generating noise data when 2D slice images are acquired by image modality because many markers are made of metal. Therefore, this paper developed shape-based registration technique to improve the limitation of fiducial marker based IGS system. Iterative Closest Points (ICP) algorithm was used to match corresponding points and quaternion based rotation and translation transformation using closed form solution applied to find the optimized cost function of transformation. we assumed that this algorithm were used in Total Knee replacement (TKR) operation. Accordingly, we have developed region-based 3D registration technique based on anatomical landmarks and this registration algorithm was evaluated in a femur model. It was found that region-based algorithm can improve the accuracy in 3D registration.