• 한국산학기술학회논문지
• /
• 제17권12호
• /
• pp.603-610
• /
• 2016

국내에 고속열차가 도입된 지 12년이 지났고, 국내기술로 개발된 KTX-산천도 운행한지 6년 정도 되었다. 호남선 고속철도의 개통으로 현재 국내 고속선로의 수송용량은 거의 포화상태가 되었고, 이에 따라 수송용량을 증대하기 위하여 열차의 운행속도를 높이는 연구 등 다양한 연구가 수행되고 있다. 본 연구는 그 중 일부로 KTX-산천 고속열차의 운행속도를 350km/h로 높이기 위하여 열차의 임계속도를 향상시키기 위해 수행되었다. KTX와 KTX-산천 영업운행 차량에서 측정된 차륜마모 데이터를 이용하여 KTX-산천 편성 모델에 대한 동역학해석을 수행하였고, KTX-산천 영업차량에서 측정된 진동가속도 측정결과와의 비교를 통하여 해석결과의 타당성을 검증하였다. 고속열차의 운행속도 향상을 위하여 열차의 임계속도 향상을 목표로 대차 주요 현가장치 파라미터에 대한 최적화 연구를 수행하였다. 민감도 분석을 통해 최적화를 위한 주요 현가장치 파라미터를 선정하였고, 반응표면분석법에 의해 2차 회귀 모형 함수를 추정하였다. 2차의 목적함수를 최소화시키는데 있어서 효율적인 성능을 발휘하는 SQP 방법을 사용하여 최적화를 수행한 결과 KTX-산천의 임계속도가 9.4%정도 증가함을 확인하였다. 최적화된 현가장치 파라미터는 KTX-산천 영업속도를 300km/h에서 350km/h로 향상시키기 위한 신규대차 설계 시 반영될 예정이다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.105-108
• /
• 2015

There are a lot of traffic jams in the metropolitan area and the commuting time has been longer nowadays. So the urban people has been interested in the GTX(Great Train Express) project in Korea. The GTX is the train which runs at 200km/h speed in underground tunnels. If the train also operates at high speed in tunnel section, the pressure wave will happen and the uplift force of pantograph may vary abruptly. If the rigid trolley bar system is used in tunnel section, it is difficult to improve the commercial speed of train. In order to improve the train speed in tunnel section, this paper presents the new pantograph concepts which can change the suspension stiffness and deals with the dynamic behavior characteristics of pantograph according to the parameter variation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.761-767
• /
• 2011

Since the "Low Carbon, Green Growth" as a social requirements is attracted public attention, the policies and investments of the railway which have been less estimated than road is re-considered. Since the starting the commercial service (2004. April), the KTX have been operated successfully while transport passengers over 100million for years. And also the project for development of KHST (Korea High Speed Train ; G7) had been accomplished with a good result, the first trainset of KTX-II which base on G7 project was manufactured and testing now. On the other hand, the world's technology of the high speed train is more faster, and changing to a distributed traction system. To catch up the world's leading technology, the HEMU(High-speed Electric Multiple Unit) project will secure new technology and aims to promote the technology of domestic high-speed train. The authors indicates the result of detail review such as a curve, slope of the track and electrical dead section of the catenary to test at 400kph and also the performance simulation of the developed rolling stock in this paper. As the result, the authors devise the test scenario to perform a maximum speed test (stability at max. speed, acceleration & deceleration etc) with the restricted conditions such as track length, track available time etc by considering above result.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.429-433
• /
• 2009

Since the "Low Carbon, Green Growth" as a social requirements is attracted public attention, the policies and investments of the railway which have been less estimated than road is re-considered. Since the starting the commercial service (2004. April), the KTX have been operated successfully while transport passengers over 100million for years. And also the project for development of KHST (Korea High Speed Train ; G7) had been accomplished with a good result, the first trainset of KTX-II which base on G7 project was manufactured and testing now. On the other hand, the world's technology of the high speed train is more faster, and changing to a distributed traction system. To catch up the world's leading technology, the HEMU(High-speed Electric Multiple Unit) project will secure new technology and aims to promote the technology of domestic high-speed train. The authors indicates the result of detail review such as a curve, slope of the track and electrical dead section of the catenary to test at 400kph and also the performance simulation of the developed rolling stock in this paper. As the result, the authors devise the test scenario to perform a maximum speed test (stability at max. speed, acceleration & deceleration etc) with the restricted conditions such as track length, track available time etc by considering above result.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1444-1448
• /
• 2004

The railway electromagnetic environment is much more severe than that found in commercial and domestic environments. However, in many instances the railway runs very close to such environments. Tn this paper we measure the strength of electromagnetic fields for Korean High Speed Train Prototype and compare that with the past result and evaluate the result according to domestic and international guideline.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.59-64
• /
• 2005

The railway electrical environment is much more severe than that found in commercial and domestic environments. However, in many instances the railway runs very close to such environments. In this paper we measure the harmonic, the strength of electromagnetic fields and the consumption energy for Korean High Speed Train and compare that with the past result and evaluate the result according to domestic and international guideline.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.26-29
• /
• 2004

In order to speed up basic concept is to enhance high speed, curve limit speed, cross limit speed, acceleration/deceleration speed. It is important to optimal interface fundamental technology of vehicle, rail, electrical power, and signal system. Tilting train has advantage minimizing investment cost of infra railway system for increasing train limit speed in curve. the developed tilting train should be operated to commercial service speed 180Km/h of 200Km/h at KNR upgrade railroad. This paper proposed the basic model of system engineering for developing of tilting EMU (maximum operation speed : 180km/h) with speed-up of conventional railway system.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.81-87
• /
• 2017

본 연구는 고속열차 시운전 시험과 이에 따른 주행동특성 고찰 및 개선에 관한 것이다. 고속열차 시운전 시험을 통한 선행 연구에서 도출한 요댐퍼 설치 방법에 따른 후미 진동 개선 방안을 실제 고속철도 차량의 시운전시에 적용하여 후미 진동 저감 효과가 있음을 확인하였다. 또한 전체 차량에 대한 진동저감 방안을 동역학 해석 소프트웨어를 사용하여 수치 해석적 방법으로 도출하였으며, 그 효과를 시운전 시험을 통하여 확인하였다. 개선된 설계안은 실제 2층 고속열차 객차에 적용되어 주행동특성 문제없이 시운전을 진행하였다. 차세대 고속열차 임계속도에 영향을 미치는 현가장치 파라미터들에 대한 민감도 분석을 수행하였으며, 임계속도에 크게 영향을 미치는 4개의 설계변수를 도출하였는데, 이는 1차 탄성조인트 열차진행 방향 강성, 2차 요댐퍼 시리즈 강성, 2차 횡댐퍼 댐핑계수, 차간 댐퍼 댐핑계수 순이었다. 이 설계변수에 대한 최적화를 통하여 임계속도를 23.3% 향상시키는 현가장치 파라미터를 제시하였으며, 이는 차세대 고속열차 상용화 모델의 설계에 이용될 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.334-338
• /
• 2004

KTX has started commercial service from Seoul to Busan and Mokpo since April 1, 2004. The service line is composed of new-high speed line and conventional line. Before KTX is runs, the maximum operational speed on conventional line was 140km/h. In order to reduce the traveling time, operation speed of KTX must be increased on the conventional line. So, we performed test running with prototype HSR-350x and verification of safety was made in $10\%$ speed-up. Korean High Speed Train HSR-350x) was developed by G7 - R&D project. In this study, in safety aspect, several technical reviews are introduced and the possibility for reduction of traveling time is investigated on the conventional line by using HSR-350x.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.970-978
• /
• 2010

In this study, interior noise of the high speed EMU was estimated by statistical energy analysis (SEA) method. Based on the data measured at a distance of 25m from a running train, exterior noise of the running train was calculated. And then it was designed as noise sources in VA ONE, a commercial software of SEA. coupling and damping loss factor of high speed EMU studied in previous studies is used. The interior noise of the train was estimated for a open-land section. The analysis of interior noise of HST in the tunnel section will be estimated through same method.