• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 2001년도 추계학술대회 발표논문집:차세대 전상거래 시대의 비즈니스전략
• /
• pp.158-165
• /
• 2001

The certification of software products can provide a greater level of acceptance and feeling of security to customers of these products. This paper presents a certification method for the quality of package software. First of all, the evaluation criteria are derived from ISO/1EC 9126 and 12119 standards, and then the evaluation module are designed considering the measurement scale type. The results can be applied to construct the certification scheme of software product quality for the commercial purpose.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 춘계학술대회
• /
• pp.193-197
• /
• 2002

The certification of software products can provide a greater level of acceptance and feeling of security to customers of these products. This paper presents a certification method for the quality of package software. First of all, the evaluation criteria are derived from IS0/1EC 9126 and 12119 standards, and then the evaluation module are designed considering the measurement scale type. The results can be applied to construct the certification scheme of software product quality for the commercial purpose.

• 대한안전경영과학회지
• /
• 제4권1호
• /
• pp.93-103
• /
• 2002

The certification of software products can provide a greater level of acceptance and feeling of security to customers of these products. This paper presents a certification method for the quality of package software. First of all, the evaluation criteria are derived from ISO/IEC 9126 and 12119 standards, and then the evaluation module are designed considering the measurement scale type. The results can be applied to construct the certification scheme of software product quality for the commercial purpose.

• 한국CDE학회논문집
• /
• 제13권4호
• /
• pp.314-322
• /
• 2008

This paper introduces an integration of Product Data Management (PDM) and Software Configuration Management (SCM). PDM and SCM have supported development of mechanical products and software products respectively. The importance of software components in the current products increases rapidly since the software enables the products to satisfy various customer requirements efficiently. Therefore the current product development needs enhanced product data management that can control both the hardware and software data seamlessly. This paper proposes an extended product data model for integrating SCM into PDM. The extension enables PDM document management to support the version control for software development. It also enables engineers to control both the software and hardware parts as integrated data objects during product configuration and engineering change management. The proposed model is implemented by using a commercial Product Lifecycle Management (PLM) system and a development of a network based robot system is tested by the implemented product development environment.

• 한국경영과학회지
• /
• 제16권2호
• /
• pp.51-51
• /
• 1991

Recently financial institutions in Korea are experiencing an unfamiliar challenge in terms of their operational risk management due to the volatility of global financial market and the incessant development of new financial products. In this paper, we present an AHP(Analytic Hierarchy Process) model to evaluate the effectiveness of commercial softwares for risk management in banking. The AHP model considers software's performance. utility, serviceability and durability as major evaluation criteria. The weight of each criterion is generated by the questionnaire survey given to practitioners in risk management in domestic commercial banks.

• 경영과학
• /
• 제16권2호
• /
• pp.51-59
• /
• 1999

Recently financial institutions in Korea are experiencing an unfamiliar challenge in terms of their operational risk management due to the volatility of global financial market and the incessant development of new financial products. In this paper, we present an AHP(Analytic Hierarchy Process) model to evaluate the effectiveness of commercial softwares for risk management in banking. The AHP model considers software's performance. utility, serviceability and durability as major evaluation criteria. The weight of each criterion is generated by the questionnaire survey given to practitioners in risk management in domestic commercial banks.

• 한국지리정보학회지
• /
• 제2권3호
• /
• pp.91-100
• /
• 1999

한국과학기술원 인공위성연구센터(SaTReC)에서는 위성 영상으로부터 과학적으로 또는 실생활에 유용한 고부가 가치 정보를 생성하기 위해 '발라드-프로' 고부가 정보 추출 소프트웨어를 개발하였다. 본 논문에서는 '발라드-프로' 소프트웨어에 대해 소개하고, 소프트웨어의 핵심 컴포넌트인 기하 보정, 정사 보정 및 수치 표고 모형 생성 컴포넌트에 대해 기술하였다. 본 소프트웨어의 성능을 분석하기 위해 GPS로 실측한 지상 기준점과 $60km{\times}60km$ SPOT Panchromatic 영상을 사용하였다. 또한 미국 지질조사국(USGS)의 DTED와 국립지리원의 수치지도에서 생성한 수치 표고 모형을 이용하여 위성 영상 처리를 위해 범용으로 사용되는 P사의 상용 소프트웨어와 비교하였다. 분석 결과에 의하면 기하 보정의 경우 '발라드-프로' 소프트웨어는 P사의 소프트웨어에 비해 적은 수의 지상 기준점을 필요로 하고, 정사 보정의 경우 비슷한 성능을 갖고 있다. 또한 수치 표고 모형 추출의 경우 '발라드-프로' 소프트웨어가 P사의 소프트웨어에 비해 정확도 면에서 2배, 수행 속도면에서 4배 우수한 것으로 나타났다.

• Journal of Positioning, Navigation, and Timing
• /
• 제2권1호
• /
• pp.33-40
• /
• 2013

In this paper, GPS signal anomaly generation software is proposed which can be used for the analysis of GPS signal anomaly effect and the design, verification, and operation test of anomalous signal monitoring technique. For the implementation of anomalous signal generation technique, anomalous signals are generated using a commercial signal generation simulator, and their effects and characteristics are analyzed. An error model equation is proposed from the result of analysis, and the anomalous signal generation software is constructed based on this equation. The proposed anomalous signal generation software has high scalability so that users can easily utilize and apply, and is economical as the additional cost for purchasing equipment is not necessary. Also, it is capable of anomalous signal generation based on real-time signal by comparing with the commercial signal generation simulator.

• Computers and Concrete
• /
• 제33권3호
• /
• pp.285-299
• /
• 2024

Recently, many engineering computations have realized their digital transformation to Machine Learning (ML)-based systems. Predicting the behavior of a structure, which is mainly computed with structural analysis software, is an essential step before construction for efficient structural analysis. Especially in the seismic-based design procedure of the structures, predicting the lateral load capacity of reinforced concrete (RC) columns is a vital factor. In this study, a novel ML-based model is proposed to predict the maximum lateral load capacity of RC columns under varying axial loads or cyclic loadings. The proposed model is generated with a Deep Neural Network (DNN) and compared with traditional ML techniques as well as a popular commercial structural analysis software. In the design and test phases of the proposed model, 319 columns with rectangular and square cross-sections are incorporated. In this study, 33 parameters are used to predict the maximum lateral load capacity of each RC column. While some traditional ML techniques perform better prediction than the compared commercial software, the proposed DNN model provides the best prediction results within the analysis. The experimental results reveal the fact that the performance of the proposed DNN model can definitely be used for other engineering purposes as well.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.695-697
• /
• 2006

Elshayal $Smart{\copyright}$ software is an almost First Arabian GIS $software{\copyright}$ which completely developed by Arabian developers team and independent of any commercial software package. The software current Features are View and Edit shape files, build new layers, add existing layers, remove layers, swap layers, save layers, set layer data sources, layer properties, zoom in & zoom out, pan, identify, selecting features, invert selection, show data table, data query builder, location query builder, build network, find shortest path, print map, save map image, copy map image to clipboard, save project map, edit move vertex, edit move features, snap vertexes, set vertex XY, move settings, converting coordinate system, applying VB script, copy selected features to another layer, move selected features to another layer, delete selected features, edit data table, modify table structure, edit map features, drawing new features, GPS tracking, 3D view, etc... The software expected Features are: Viewing raster image and image geo-referencing, read other map formats such as DXF Format and Tiger Line Format.