• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.199-208
• /
• 2001

In this paper, an automatic route tracking algorithm using the position variables and the yaw angle of a ship is suggested, Since most autopilot systems paly only a role of course-keeping by integrating the gyrocompass output, they cannot cope with position errors between the desired route and real route of the ship resulted from a drifting and disturbances such as wave, wind and currents during navigation. In order for autopilot systems to track the desired route, a method which can reduce such position errors is required and some algorithms have been proposed[1,2]While such were turned out effective methods, they have a shortage that the rudder control actions for reducing the position errors are occurred very frequently. In order to improve this problem it is necessary to convert that error into the corresponding yaw angle and necessary to treat only yaw angle control problem. To do this a command generation algorithm which converts the rudder angle command reducing the current position error into they yaw angle command is suggested. To control the ship under disturbances and nonlinearities of the ship dynamics, the adaptive fuzzy controller is developed. Finally, through computer simulations for two ship models, the effectiveness of the suggested method and the possibility of the automatic route tracking are assured.

• 문화기술의 융합
• /
• 제9권5호
• /
• pp.409-413
• /
• 2023

오늘날 군은 조직구성원의 특성변화에 맞추어 조직 효과성을 달성하기 위해 많은 노력을 하고 있다. 현재 한국군에서 행동으로 움직이는 여단급 이하 조직구성원은 우리가 흔히 이야기하는 MZ세대가 주축을 이루고 있다. 이와 같은 MZ세대는 개인의 만족과 가치관을 중요시하는 특성으로 타인이 자신의 취향과 의견을 인정해 주지 않으면 공정하지 않다고 생각한다. 따라서 군에서도 이와 같은 조직구성원들의 특성에 맞추어 다양한 지휘 방법과 조직문화를 개선할 필요가 있다. 본 연구에서는 군사 선진국인 독일군의 임무형 지휘의 특성 및 핵심요소를 분석하였으며 이러한 독일군의 사례를 고찰하여 우리나라 군 조직의 주축인 MZ세대의 관점에서 군 조직 실정에 맞는 '임무형 지휘' 시스템을 도입해야 할 것이다.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.344-351
• /
• 2014

In order to accomplish complex navigational commands, humanoid robot should be able to modify its walking period, step length and direction independently. In this paper, a novel walking pattern generation algorithm is proposed to satisfy these requirements. Modification of the walking pattern can be considered as a transition between two periodic walking patterns, which follows each navigational command. By assuming the robot as a linear inverted pendulum, the equations of motion between ZMP(Zero Moment Point) and CM(Center of Mass) state is easily derived and analyzed. After navigational command is translated into the desired CM state, corresponding CM motion is generated to achieve the desired state by using simple ZMP functions. Moreover, when the command is not feasible, feasible command is alternated by using binary search algorithm. Subsequently, corresponding CM motion is generated. The effectiveness of the proposed algorithm is verified by computer simulation.

• 항공우주기술
• /
• 제13권1호
• /
• pp.44-54
• /
• 2014

본 논문에서는 3구 추력기 2모듈 형태의 추력기시스템 기준으로 발사체 상단 자세제어용 추력기시스템 명령생성방식 2가지를 제시한다. 하나는 혼합오차함수를 이용하는 방식이고, 다른 하나는 명령혼합함수를 이용하는 방식이다. 시뮬레이션을 통해 두 방식을 비교 분석한 결과, 제어축 간의 상호 간섭, 각축 제어기의 독립적인 설계와 분석 용이성, 비행성능 예측 가능성 등의 관점에서 명령혼합 알고리듬이 상대적으로 유리함을 보인다.

• 한국항공우주학회지
• /
• 제46권8호
• /
• pp.639-651
• /
• 2018

본 논문은 인공위성의 자세명령을 해석적으로 생성하는 기법을 제안한다. 실제 위성에서는 1) 구동기 성능, 2) 위성체 유연구조, 3) 원격명령 데이터크기 등과 같은 제한조건들이 존재하고, 이로 인해 해석적인 자세명령 해를 구하기 어렵다. 따라서 본 논문에서는 고유축 회전, 프로파일 형상화를 통해 문제를 단순화하는 방법을 제안하고, 최종적으로 해석적 해를 유도하였다. 생성된 자세명령은 온-보드 자세제어기의 피드포워드 입력 형태로 사용되어 위성의 기동성을 높일 수 있다. 각속도 경계조건에 따라 rest-to-rest 기동과 spin-to-spin 기동으로 나누어 자세명령 해를 유도하였다. 시뮬레이션 예제를 통해 제안된 자세명령생성 기법이 구동기 제한조건을 지키면서 초기/최종 시간에서의 경계조건도 잘 만족하는 것을 확인하였다. 제안된 해석 해는 자세명령을 비교적 적은 수의 파라미터로 구현할 수 있어 원격명령 데이터크기 측면에서 경쟁력이 있다. 또한, 해석 해로 반복계산이 필요없어 온-보드 자세명령생성 자동화에도 기여할 수 있을 것으로 판단된다.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2368-2375
• /
• 2015

To accommodate various navigational commands, a humanoid should be able to change its walking motion in real time. Using the modifiable walking pattern generation (MWPG) algorithm, a humanoid can handle dynamic walking commands by changing its walking period, step length, and direction independently. If the humanoid is given a command to perform an infeasible movement, the algorithm substitutes the infeasible command with a feasible one using binary search. The feasible navigational command is subsequently translated into the desired center-of-mass (CM) state. Every sample time CM reference is generated using a zero-moment-point (ZMP) variation scheme. Based on this algorithm, various complex walking patterns can be generated, including backward and sideways walking, without detailed consideration of the feasibility of the navigational commands. In a previous study, the effectiveness of the MWPG algorithm was verified by dynamic simulation. This paper presents experimental results obtained using the small-sized humanoid robot platform DARwIn-OP.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.751-758
• /
• 2016

The modifiable walking pattern generation (MWPG) algorithm can handle dynamic walking commands by changing the walking period, step length, and direction independently. When an infeasible command is given, the algorithm changes the command to a feasible one. After the feasibility of the navigational command is checked, it is translated into the desired center of mass (CM) state. To achieve the desired CM state, a reference CM trajectory is generated using predefined zero moment point (ZMP) functions. Based on the proposed algorithm, various complex walking patterns were generated, including backward and sideways walking. The effectiveness of the patterns was verified in dynamic simulations using the Webots simulator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권12호
• /
• pp.4364-4384
• /
• 2021

The dynamic network state and the mobility of the terminals make the service function chain (SFC) orchestration mechanisms based on static and deterministic assumptions hard to be applied in SDN/NFV mobile edge computing networks. Designing dynamic and online SFC orchestration mechanism can greatly improve the execution efficiency of compute-intensive and resource-hungry applications in mobile edge computing networks. In order to increase the overall profit of service provider and reduce the resource cost, the system running time is divided into a sequence of time slots and a dynamic orchestration scheme based on an improved column generation algorithm is proposed in each slot. Firstly, the SFC dynamic orchestration problem is formulated as an integer linear programming (ILP) model based on layered graph. Then, in order to reduce the computation costs, a column generation model is used to simplify the ILP model. Finally, a two-stage heuristic algorithm based on greedy strategy is proposed. Four metrics are defined and the performance of the proposed algorithm is evaluated based on simulation. The results show that our proposal significantly provides more than 30% reduction of run time and about 12% improvement in service deployment success ratio compared to the Viterbi algorithm based mechanism.

• 대한임베디드공학회논문지
• /
• 제13권6호
• /
• pp.321-328
• /
• 2018

This paper presents an automatic target tracking flight system using a PID controller based on velocity command of a multirotor UAV. The automatic flight system includes marker based onboard target detection and an automatic velocity command generation replacing manual controller. A quad-rotor UAV is equipped with a camera and an image processing computer to detect the marker in real time and to estimate the relative distance from the target. The marker tracking system consists of PID controller and generates velocity command based on the relative distance. The generated velocity command is used as the input of the UAV's original flight controller. The operation of the proposed system was verified through actual flight tests using a marker on top of a moving vehicle and tracks it to successfully demonstrate its capability using a quad-rotor UAV.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권3호
• /
• pp.576-599
• /
• 2013

Protocol reverse engineering is useful for many security applications, including intelligent fuzzing, intrusion detection and fingerprint generation. Since manual reverse engineering is a time-consuming and tedious process, a number of automatic techniques have been proposed. However, the accuracy of these techniques is limited due to the complexity of binary instructions, and the derived formats have missed constraints that are critical for security applications. In this paper, we propose a new approach for protocol format extraction. Our approach reasons about only the evaluation behavior of a program on the input message from concolic execution, and enables field identification and constraint inference with high accuracy. Moreover, it performs binary analysis with low complexity by reducing modern instruction sets to BIL, a small, well-specified and architecture-independent language. We have implemented our approach into a system called Icefex and evaluated it over real-world implementations of DNS, eDonkey, FTP, HTTP and McAfee ePO protocols. Experimental results show that our approach is more accurate and effective at extracting protocol formats than other approaches.