• 제목/요약/키워드: Command and control system

검색결과 913건 처리시간 0.029초

Dynamic Control Allocation for Shaping Spacecraft Attitude Control Command

  • Choi, Yoon-Hyuk;Bang, Hyo-Choong
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제8권1호
    • /
    • pp.10-20
    • /
    • 2007
  • For spacecraft attitude control, reaction wheel (RW) steering laws with more than three wheels for three-axis attitude control can be derived by using a control allocation (CA) approach.1-2 The CA technique deals with a problem of distributing a given control demand to available sets of actuators.3-4 There are many references for CA with applications to aerospace systems. For spacecraft, the control torque command for three body-fixed reference frames can be constructed by a combination of multiple wheels, usually four-wheel pyramid sets. Multi-wheel configurations can be exploited to satisfy a body-axis control torque requirement while satisfying objectives such as minimum control energy.1-2 In general, the reaction wheel steering laws determine required torque command for each wheel in the form of matrix pseudo-inverse. In general, the attitude control command is generated in the form of a feedback control. The spacecraft body angular rate measured by gyros is used to estimate angular displacement also.⁵ Combination of the body angular rate and attitude parameters such as quaternion and MRPs(Modified Rodrigues Parameters) is typically used in synthesizing the control command which should be produced by RWs.¹ The attitude sensor signals are usually corrupted by noise; gyros tend to contain errors such as drift and random noise. The attitude determination system can estimate such errors, and provide best true signals for feedback control.⁶ Even if the attitude determination system, for instance, sophisticated algorithm such as the EKF(Extended Kalman Filter) algorithm⁶, can eliminate the errors efficiently, it is quite probable that the control command still contains noise sources. The noise and/or other high frequency components in the control command would cause the wheel speed to change in an undesirable manner. The closed-loop system, governed by the feedback control law, is also directly affected by the noise due to imperfect sensor characteristics. The noise components in the sensor signal should be mitigated so that the control command is isolated from the noise effect. This can be done by adding a filter to the sensor output or preventing rapid change in the control command. Dynamic control allocation(DCA), recently studied by Härkegård, is to distribute the control command in the sense of dynamics⁴: the allocation is made over a certain time interval, not a fixed time instant. The dynamic behavior of the control command is taken into account in the course of distributing the control command. Not only the control command requirement, but also variation of the control command over a sampling interval is included in the performance criterion to be optimized. The result is a control command in the form of a finite difference equation over the given time interval.⁴ It results in a filter dynamics by taking the previous control command into account for the synthesis of current control command. Stability of the proposed dynamic control allocation (CA) approach was proved to ensure the control command is bounded at the steady-state. In this study, we extended the results presented in Ref. 4 by adding a two-step dynamic CA term in deriving the control allocation law. Also, the strict equality constraint, between the virtual and actual control inputs, is relaxed in order to construct control command with a smooth profile. The proposed DCA technique is applied to a spacecraft attitude control problem. The sensor noise and/or irregular signals, which are existent in most of spacecraft attitude sensors, can be handled effectively by the proposed approach.

유도무기 사격지휘통제 시뮬레이터 시스템 구현 (A Implementation of Command and Control Simulator System for Missile System)

  • 이정훈;김기범;이창림;전정희;구봉주
    • 한국군사과학기술학회지
    • /
    • 제14권4호
    • /
    • pp.556-563
    • /
    • 2011
  • Recently, the development of military system is focused on Network Centric Warfare. But, there is no deployed Command and Control System for Missile System in the country. Therefore, Command and Control System for Missile System was simulated to predict feasibility for the future development in this paper. The contents of the design and implementation for simulated system are described in details. Besides, a method for avoiding collisions in 1:N radio communication environment is proposed as the future work. The simulated system in this paper will be a help to developing Command and Control System for Missile System in the future.

HTTP 기반의 자바를 이용한 원격 감시 및 제어 시스템 (HTTP based remote monitoring and control system using JAVA)

  • 이경웅;최한수
    • 제어로봇시스템학회논문지
    • /
    • 제10권9호
    • /
    • pp.847-854
    • /
    • 2004
  • In this paper, It is studied to control and to monitor the remote system state using HTTP(Hyper Text Transfer Protocol) object communication. The remote control system is controlled by using a web browser or a application program. This system is organized by three different part depending on functionality-server part, client part, controller part. The java technology is used to composite the server part and the client part and C language is used for a controller. The server part is waiting for the request of client part and then the request is reached, the server part saves client data to the database and send a command set to the client part. The administrator can control the remote system just using a web browser. Remote part is worked by timer that is activated per 1 second. It gets the measurement data of the controller part, and then send the request to the server part and get a command set in the command repository of server part using the client ID. After interpreting the command set, the client part transfers the command set to the controller part. Controller part can be activated by the client part. If send command is transmitted by the client part, it sends sensor monitoring data to the client part and command set is transmitted then setting up the value of the controlled system.

안정성증강 작동기와 트림 작동기를 이용한 헬리콥터 자세명령반응타입 제어시스템 설계 (Helicopter Attitude Command Response Type Control System Design using SAS Actuators and Trim Actuators)

  • 김응태;최인호;현정욱
    • 한국항공운항학회지
    • /
    • 제21권4호
    • /
    • pp.34-40
    • /
    • 2013
  • Attitude command response type required for enhanced handling qualities of helicopter can be implemented by mechanical automatic flight control system with SAS actuators which have limited authorities. However, the early saturation of SAS actuator hinders the helicopter from following the attitude command for large stick command. Auto-trim controller can delay SAS actuator's saturation by utilizing trim actuators and allows the attitude command response type for larger stick command. This paper describes the control law for limited authority system of helicopter with auto-trim. Limited authority system is applied to BO-105 linear dynamic model and simulation is performed along with handling quality analysis.

Stationary layout control 방식의 AGC시스템 개발 (AGV system with a stationary layout control method)

  • 이승우;송준엽;박화영
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
    • /
    • pp.906-911
    • /
    • 1992
  • We deals with stationary layout control system of AGV. It is a intelligent contorl system to be wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steening, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR (Infrared) modem. Epecially it is possible to easily network to use not an exclusive controller of AGV but

  • PDF

AGV 시스템의 운영기술 개발 (Development of Operating Technology for AGV System)

  • 송준엽;이승우;이현용
    • 연구논문집
    • /
    • 통권22호
    • /
    • pp.27-38
    • /
    • 1992
  • We deals with stationary layout control system of AGV. It is a intelligent control system to he wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steering, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR(JnfraRed) modem. Especially it is possible to easily network to use not an exclusive controller of AGV but personal computer(PC) when communicate and interface a different kind of controller.

  • PDF

백스텝핑 방법과 외란관측기법에 의한 미사일 제어시스템의 동역학을 고려한 미사일 유도법칙의 설계 (Design of a Missile Guidance Law via Backstepping and Disturbance Observer Techniques Considering Missile Control System Dynamics)

  • 송성호
    • 제어로봇시스템학회논문지
    • /
    • 제14권1호
    • /
    • pp.88-94
    • /
    • 2008
  • In this paper, a design method of a missile guidance command is presented considering the dynamics of missile control systems. The design of a new guidance command is based on the well-known PNG(propotional navigation guidance) laws. The missile control system dynamics cause the time-delays of the PN guidance command and degrade the performance of original guidance laws which are designed under the assumption of the ideal missile control systems. Using a backstepping method, these time-delay effects can be compensated. In order to implement the guidance command developed by the backstepping procedure, it is required to measure or calculate the successive time-derivatives of the original guidance command, PNG and other kinematic variables such as the relative distance. Instead of directly using the measurements of these variables and their successive derivatives, a simple disturbance observer technique is employed to estimate a guidance command described by them. Using Lyapunov method, the performance of a newly developed guidance command is analyzed against a target maneuvering with a bounded and time-varying acceleration.

합동작전 지휘통제 효과도 모의분석을 위한 평가기준 연구 (A Study on Evaluation Criteria for M&S Analysis of Command and Control Effectiveness in Joint Operations)

  • 손영환;김원배
    • 한국시뮬레이션학회논문지
    • /
    • 제20권4호
    • /
    • pp.167-175
    • /
    • 2011
  • 미래전이 네트워크중심전(NCW, Network Centric Warfare)으로 변화함에 따라 세계적으로 지휘통제의 효과도에 관한 관심이 점증하고 있다. 과거의 기동과 타격자산 중심의 소모전 위주의 전투와 달리, 현대전은 정보의 획득과 유통이 중요시되는 정보 네트워크 기반의 전쟁으로서 C4ISR(Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance) 체계가 핵심적인 역할을 담당할 것이라는 데는 재론의 여지가 없다. 그럼에도 불구하고 지휘통제가 전투에 기여하는 효과의 정도를 측정하는 방법론이나 효과 반영체계 등을 명확하게 설명할 방법을 갖추고 있지 못한 실정이다. 본 연구에서는 네트워크중심작전의 기반이 되는 C4ISR 체계에 의한 효과도 증진을 개념적으로 설명할 수 있는 프레임워크인 미국방부가 개발한 NCO-CF(Network Centric Operations-Conceptual Framework)에 대하여 살펴보았다. 그리고 NCO-CF를 기반으로 하여 지휘통제 효과도 모의분석을 위한 평가기준을 도출하기 위한 방법론을 제시하였다. 사례연구로 합동작전의 지휘통제 체계에 이 방법론을 적용하여 모의분석을 위한 평가기준을 도출하였다.

모바일-매니퓰레이터 구조 로봇시스템의 안정한 모션제어에 관한연구 (A Study on Stable Motion Control of Mobile-Manipulators Robot System)

  • 박문열;황원준;박인만;강언욱
    • 한국산업융합학회 논문집
    • /
    • 제17권4호
    • /
    • pp.217-226
    • /
    • 2014
  • Since the world has changed to a society of 21st century high-tech industries, the modern people have become reluctant to work in a difficult and dirty environment. Therefore, unmanned technologies through robots are being demanded. Now days, effects such as voice, control, obstacle avoidance are being suggested, and especially, voice recognition technique that enables convenient interaction between human and machines is very important. In this study, in order to conduct study on the stable motion control of the robot system that has mobile-manipulator structure and is voice command-based, kinetic interpretation and dynamic modeling of two-armed manipulator and three-wheel mobile robot were conducted. In addition, autonomous driving of three-wheel mobile robot and motion control system of two-armed manipulator were designed, and combined robot control through voice command was conducted. For the performance experiment method, driving control and simulation mock experiment of manipulator that has two-armed structure was conducted, and for experiment of combined robot motion control which is voice command-based, through driving control, motion control of two-armed manipulator, and combined control based on voice command, experiment on stable motion control of voice command-based robot system that has mobile-manipulator structure was verified.

미래 지휘통제체계를 위한 보안 규정 개선 요구사항 분석 (Analysis of Improving Requirement on Military Security Regulations for Future Command Control System)

  • 강지원;문재웅;이상훈
    • 융합보안논문지
    • /
    • 제20권1호
    • /
    • pp.69-75
    • /
    • 2020
  • 지휘통제체계는 인간의 두뇌와 신경 조직처럼 정보·감시·정찰(ISR)에서 정밀타격체계(PGR)를 연결하는 링커이며 전투력의 중심이다. 미래 한국군의 지휘통제체계 구축시 기술적 문제뿐만 아니라 제도적 문제를 함께 고려해야 한다. 미국 국방부는 지휘 통제체계 개발에 앞서 보안 정책을 수립하고 이를 구체화하여 아키텍처 문서로 정리하며, 이를 토대로 보안 정책의 일관성과 지속을 유지한다. 본 논문에서는 미군의 지휘통제체계 구축시 적용하는 보안 아키텍처를 살펴보고 현행 한국군의 보안 관련 정책(규정)을 분석하여 미래 지휘통제체계 구축 시 보안 요구사항을 식별한다. 식별된 보안 요구사항을 그룹핑하여 현행 보안 관련 규정의 분야별 개선사항을 도출하여 제시하고자 한다.