• Annual Conference of KIPS
• /
• 2011.04a
• /
• pp.304-306
• /
• 2011

본 논문은 감시정찰 센서네트워크 환경에서 초소형 복합센서를 이용하여 적 또는 전장 환경에 대한 감시정찰 업무를 수행하는 무인 감시정찰 기술을 기반으로 한다. 감시 정찰 환경에서 센서를 통해 획득하는 환경 평가로서, 적군의 도보를 통한 침투 및 차량의 이동을 파악하고 경로를 도시하여 적군의 이동이나 작전 상황을 평가한다. 본 논문은 이러한 감시정찰 시나리오에 따른 상황을 추출하고, 해당 시나리오를 바탕으로 상황을 평가하기 위한 지능형 에이전트의 구조 및 설계 메커니즘을 제안하여 보다 효율적인 감시정찰 운용 및 수행을 위한 기반 기술로 활용한다.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.446-449
• /
• 1990

A Multi-Robot Control language (MRCL) is proposed to effectively control the multi-robot. MRCL has not only single-robot, command, but multi-robot command with multi-task OS, XINU. Concurrent motion, coordinate motion, and simple collision avoidance motion are implemented. This language is expected to act as a intelligent supporting tool for multi-robot system. To verify the effectiveness of the MRCL, a simple puzzle matching example is illustrated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.139-142
• /
• 1996

This paper presents a method of controlling contact force for deburring tasks. The cope with the nonlinearities and time-varying properties of the robot and the environment, a neural network control theory is applied to design the contact force control system. We show that the contact force between the hand and the contacting surface can be controlled by adjusting the command velocity of a robot hand, which is accomplished by the modeling of a robot and the environment as Mass-Spring-Damper system. Simulation results are shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.98.2-98
• /
• 2001

It is necessary to have enough transmission capacity for advanced internet techniques and various digital home appliances networking. Home appliances interface IEEE1394 technique has much wealthy transmission skill. IEEE1394 is using home appliances through various information form image and voice change data real time print out. In this paper, AVC CTS technology and IEEE1394 technology are introduced. Digital Video Camera includes compression format using DV. System composition control is consisted of protocols like IEC-61883 and AV/C command set standard.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.86-95
• /
• 2014

For the accomplishment of satellite's own missions, complicated control procedures and commands are required. Although absolute-Time Command and Command Sequences have been applied for controlling satellite and its operation historically, these command system only has a capability to manage sequential control process and has a limitation that cannot deal with decision and branch for corresponding to the condition of the time. To resolve above limitation, KARI has designed RTCSC which is mainly based on the existing RTCS but adopts a one-byte Op Code for supporting decision making and conditional branch. This paper introduces the design and implementation of RTCSC as On-Board Control System like OBCP, VML and IP.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.35-44
• /
• 2006

When control surface failure occurs, it is conventional to correct a current control or to transform to other control. In this paper, instead of adopting a conventional way, a reconfiguration method which compensate the failure with alternative control surface deflection, depending on the level of failure, by using neural network and PCH(Pseudo-Control Hedging). The Conroller is designed of inner-loop(SCAS : Stability Command Augmentation System) with DMI(Dynamic Model Inversion) and outer-loop with Y axis acceleration feedback for a coordinate turn. Additionally, double PCH method was adopted to prevent actuator saturation and input command was generated to compensate for failure. At the end, The feasibility of the method is validated with randomly selected failure scenarios.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2473-2475
• /
• 1998

In this paper, we implemented RS232C serial communication by the 2 wires(Data,GND), and multiple access, by the applying Collision Sensing Multiple Access(CSMA) Protocol. Multiple access is implemented by assigning a unique ID to each controller. The multiple access control operation starts by sending a command packet from a host to another host and the command packet is composed of ID bytes of source and target host computer, data bytes and the check sum, byte. In host computer, after sending command packet, the collision from loop back data. If collision is detected, it means a command packet was collided with another command packet for another host. The packet communication of the controller enables the multiple acces of the controller through the common serial data link. The application of this serial communication through CSMA protocol and the usage of two wires, have an effect on saving the wires and convenient of layout work.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.940-943
• /
• 1996

In teleoperating, as seeing the monitor screen obtained from a camera instituted in the working environment, human operator generally controls the slave arm. Because we can see only 2-D image in a monitor, human operator does not know the depth information and can not work with high accuracy. In this paper, we proposed a traded control method using an visual sensor for the purpose of solving this problem. We can control a teleoperation system with precision when we use the proposed algorithm. Not only a human operator command but also an autonomous visual sensor feedback command is given to a slave arm for the purpose of coincidence current image features and target image features. When the slave arm place in a distant place from the target position, human operator can know very well the difference between the desired image features and the current image features, but calculated visual sensor command have big errors. And when the slave arm is near the target position, the state of affairs is changed conversely. With this visual sensor feedback, human does not need coincide the detail difference between the desired image features and the current image features and proposed method can work with higher accuracy than other method without, sensor feedback. The effectiveness of the proposed control method is verified through series of experiments.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1994.11a
• /
• pp.99-107
• /
• 1994

For the secure control of the communication satellite, security mechanisms should be employed on the ground station as well as on the spacecraft. In this paper, we present a security architecture fur the spacecraft command security of the communication satellite. An authentication mechanism is also proposed using message authentication code (MAC) based on the Data Encryption Standard (DES) cryptosystem.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.525-530
• /
• 2003

This paper is concerned with a control allocation strategy using the dynamic inversion which generates the nominal control input trajectories, and autopilot design using the time-varying control technique which is time-varying version of pole placement of linear time-invariant system for an agile missile with aerodynamic fin and thrust vectoring control. Dynamic inversion can decide the amount of the deflection of each control effector, aerodynamic fin and thrust vectoring control, to extract the maximum performance by combining the action of them. Time-varying control technique for autopilot design enhance the robustness of the tracking performance for a reference command. Nonlinear simulations demonstrates the dynamic inversion provides the effective nominal control input trajectories to achieve the angle of attack command, and time-varying control technique exhibits good robustness for a wide range of angle of attack.