• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.331-333
• /
• 1995

A high performance motor drive system must have a good speed command tracking, a insensitivity to a parameter variation and sampling time. In this paper, a robust speed controller for an induction motor is proposed. The speed controller is fuzzy-sliding adaptive controller and its system continuously is varied. That is, only P gain act in dynamic state, I gain in steady-state. Because this system is a sort of adaptive control system, global stability analysis is used to Lyapunov function. Consequently, in this paper application of fuzzy sliding adaptive controller to induction motor controlled by vecter control is presented and the control system is digitally implemented within DSP.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.150-152
• /
• 2004

The battery charge/discharge process, the final step of the secondary battery production process, requires real-time precision controls for improving both lifetime and performance of the battery cell. In this paper, we present embedded system design for precision control of the secondary battery charge/discharge production process using low power embedded processor based on embedded linux. This system receive charge/discharge command from the main server through ethernet. Compared to existing charge/discharge control system, our design makes low cost and precision control system possible.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1634-1641
• /
• 2018

This study focuses on a high-performance direct active and reactive power controller design that is successfully applicable to three-phase pulse width modulation (PWM) AC/DC converters used in renewable distributed energy generation systems. The proposed controller can overcome the sluggish transient dynamic response of conventional controllers to rapid power command changes. Desired active and reactive powers can be thoroughly obtained at the end of each PWM period through a deadbeat solution. The proposed controller achieves an exact nonlinear cross-coupling decoupling of system power without using a predefined switching table or bang/bang hysteresis control. A graphical and analytical analysis that naturally leads to a control voltage vector selection is provided to confirm the finding. The proposed control strategy is evaluated on a 3 kW PWM AC/DC converter in the simulation and experiment.

• Strategy21
• /
• s.41
• /
• pp.52-84
• /
• 2017

After finishing Cold War, the U.S. Navy's ability to Sea control has been gradually eroded last 15-20 years. The global security environment demands that the surface Navy rededicate itself to sea control, as a new group of potential adversaries is working to deny U.S. navy command of the sea. China has been increasing their sea denial capability, such as extended anti-surface cruise missile and anti-surface ballistic missile. To cope with this situation, the U.S. Naval Surface Forces Command has announced Surface Forces Strategy: Return to Sea Control. It is a new operating and organizing concept for the U.S. surface fleet called 'distributed lethality'. Under distributed lethality, offensive weapons such as new ASCMs are to be distributed more widely across all types of Navy surface ships, and new operational concept for Navy surface fleet's capability for attacking enemy ships and make it less possible for an enemy to cripple the U.S. fleet by concentrating its attack on a few very high-value Navy surface ships. By increasing the lethality of the surface ships and distributing them across wide areas, the Navy forces potential adversaries to not only consider the threat from our carrier-based aircraft and submarines, but they now consider the threat form all of those surface ships. This idea of using the distributed lethality template to generate surface action groups and adaptive force package and to start thinking about to increase the lethal efficacy of these ships. The U.S. Navy believes distributed lethality increases the Navy's sea control capability and expands U.S. conventional deterrence. Funding new weapons and renovated operating concept to field a more lethal and distributed force will enable us to establish sea control, even in contested area. The U.S. Navy's Surface Forces Strategy provides some useful implications for The ROK Navy. First the ROK Navy need to reconsider sea control mission. securing sea control and exploiting sea control are in a close connection. However, recently the ROK Navy only focuses on exploiting sea control, for instance land attack mission. the ROK Navy is required to reinvigorate sea control mission, such as anti-surface warfare and anti-air warfare. Second, the ROK Navy must seek the way to improve its warfighting capability. It can be achieved by developing high-edge weapons and designing renewed operating concept and embraced new weapon's extended capabilities.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.3
• /
• pp.263-270
• /
• 2003

This paper deals with a control technique of eliminating the transient vibration of a waist axis of an articulated robot. This technique is based on a model-based control in order to establish the damping effect on the mechanical part. The control model is related to the velocity control loop, and it is composed of reduced-order electrical and mechanical parts. Using this model, the velocity of the load is estimated, which is converted to the motor shaft. The difference between the estimated load speed and the motor speed is calculated dynamically, and it is added to the velocity command to suppress the transient vibration of a waist axis of the robot arm. The function of this technique is to increase the cut-off frequency of the system and the damping ratio at the driven machine part. This control model is easily obtained from design or experimental data and its algorithm can be easily installed in a DSP. This control technique is applied to a waist axis of an articulated robot composed of a harmonic drive gear reducer and a robot arm with 5 degrees of freedom. Simulations and experiments show satisfactory control results to reduce the transient vibration at the end-effector.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.4
• /
• pp.97-104
• /
• 2018

A connected control method for the adjacent buildings has been studied to reduce dynamic responses. In these studies, seismic loads were generally used as an excitation. Recently, multi-hazards loads including earthquake and strong wind loads are employed to investigate control performance of various control systems. Accordingly, strong wind load as well as earthquake load was adopted to evaluate control performance of adaptive smart coupling control system against multi-hazard. To this end, an artificial seismic load in the region of strong seismicity and an artificial wind load in the region of strong winds were generated for control performance evaluation of the coupling control system. Artificial seismic and wind excitations were made by SIMQKE and Kaimal spectrum based on ASCE 7-10. As example buildings, two 20-story and 12-story adjacent buildings were used. An MR (magnetorheological) damper was used as an adaptive smart control device to connect adjacent two buildings. In oder to present nonlinear dynamic behavior of MR damper, Bouc-Wen model was employed in this study. After parametric studies on MR damper capacity, optimal command voltages for MR damper on each seismic and wind loads were investigated. Based on numerical analyses, it was shown that the adaptive smart coupling control system proposed in this study can provide very good control performance for Multi-hazards.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.980-985
• /
• 1988

In this paper, a control system of the PUMA 560 robot manipulator using a PC (Personal Computer) is presented. The hardware of the designed control system is composed of IBM-PC/AT, interface board, selection board, interrupt generating circuit, and the servo control unit of the PUMA controller. A robot control library is developed using assembly and C language, and is composed of several low-level functions and arm interface routines, world model routines, arm kinematics routines, and motion command service routines. Using the designed library, joint interpolated motion and Cartesian interpolated motion of the PUMA robot manipulator are realized. In the future, our system is expected to be a very helpful basis and a useful tool for developing various control algorithms of robot manipulator using sensory information.

• Advances in aircraft and spacecraft science
• /
• v.10 no.1
• /
• pp.1-18
• /
• 2023

This paper investigates the integrated control of an air-breathing hypersonic vehicle considering the safety of propulsion system under acceleration. First, the vehicle/engine coupling model that contains a control-oriented vehicle model and a quasi-one-dimensional dual-mode scramjet model is established. Next, the coupling process of the integrated control system is introduced in detail. Based on the coupling model, the integrated control framework is studied and an integrated control system including acceleration command generator, vehicle attitude control loop and engine multivariable control loop is discussed. Then, the effectiveness and superiority of the integrated control system are verified through the comparison of normal case and limiting case of an air-breathing hypersonic scramjet coupling model. Finally, the main results show that under normal acceleration case and limiting acceleration case, the integrated control system can track the altitude and speed of the vehicle extremely well and adjust the angle deflection of elevator to offset the thrust moment to maintain the attitude stability of the vehicle, while assigning the two-stage fuel equivalent ratio to meet the thrust performance and safety margin of the engine. Meanwhile, the high-acceleration requirement of the air-breathing hypersonic vehicle makes the propulsion system operating closer to the extreme dangerous conditions. The above contents demonstrate that considering the propulsion system safety will make integrated control system more real and meaningful.

• Korean Journal of Artificial Intelligence
• /
• v.12 no.3
• /
• pp.9-15
• /
• 2024

This paper addresses the critical need for quadcopters in GPS-denied indoor environments by proposing a novel attitude control mechanism that enables autonomous navigation without external guidance. Utilizing AR marker detection integrated with a dual PID controller algorithm, this system ensures accurate maneuvering and positioning of the quadcopter by compensating for the absence of GPS, a common limitation in indoor settings. This capability is paramount in environments where traditional navigation aids are ineffective, necessitating the use of quadcopters equipped with advanced sensors and control systems. The actual position and location of the quadcopter is achieved by AR marker detection technique with the image processing system. Moreover, in order to enhance the reliability of the attitude PID control, the dual closed loop control feedback PID control with dual update periods is suggested. With AR marker detection technique and autonomous attitude control, the proposed quadcopter system decreases the need of additional sensor and manual manipulation. The experimental results are demonstrated that the quadrotor's autonomous attitude control and operation with the dual closed loop control feedback PID controller with hierarchical (inner-loop and outer-loop) command update period is successfully performed under the non-GPS aided indoor environment and it enhanced the reliability of the attitude and the position PID controllers within 17 seconds. Therefore, it is concluded that the proposed attitude control mechanism is very suitable to GPS-denied indoor environments, which enables a quadcopter to autonomously navigate and hover without external guidance or control.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2923-2926
• /
• 2003

In this paper, a swallowable miniaturized capsule, which applicable for electrical stimulation of digestive organ to improve the motion of intestine in research purpose, is proposed and implemented. The developed capsule can be controlled for the behavior of the power on/off, amplitude and pulse rate for the patient stimulus, by internally equipped with miniaturized RF receiver that linked by the command of external transmitter The experimental result of the implemented miniaturized capsule in the animal intestine show the ability of effective control for the stimulus parameters.