• Convergence Security Journal
• /
• v.12 no.4
• /
• pp.57-69
• /
• 2012

C4ISR system is an important tool for military operational command and control. Therefore, it is frequently exposed to the cyber-terror attempt to paralyze the military command and control system. Generally, the information system uses IDS and firewall as major security computing tools. C4ISR system also uses them as major measures for the information protection. But the usefulness of IDS is reduced due to the frequent false-positives and false-negatives if the behavioral patterns are modified or new behavioral patterns appear. This paper presents new IDS structure which can create modified attack patterns and unexpected attack patterns automatically during IDS probing process. The proposed IDS structure is expected to enhance the information protection capability of the C4ISR system by reducing false-positives and false-negatives through the creation and verification of new attack patterns.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.1
• /
• pp.66-74
• /
• 2012

The virtual target signal generator was developed to verify the shipborne tracking radar performance. It was used to DRFM(Digital RF Memory) method to generate the virtual moving targets. The target signal includes Doppler shift and RCS according to the target motion. And the signal generator can make jamming signal and clutter to test shipborne radar performance at real environmental condition. This paper described the functional diagram and the hardware configuration items to meet the test requirements for the tracking radar. And it showed the critical design points for the sub-systems. The signal generator which was developed in this paper shared the operational information of the radar with the radar command and control part. To test the frequency agility of the radar, it had the local oscillator which could do high speed frequency switching according to radar information. By communicating between the signal generator and the radar command and control part, the local oscillator of signal generator could be controlled every pulse. It reduced the instantaneous bandwidth of signal generator and minimized the spurious. So it lowered the probability of generating wrong targets.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.349-356
• /
• 2015

Air Defense Command Control and Alert(ADC2A) system is a system that ensures simultaneity and integrity of air defense operations by combining sensors, weapons and Command and Control(C2) systems over a tactical network to protect forces, facilities and strategic points from enemy's air attack. Improving message processing speed is a very important factor for ADC2A, because it uses high frequency bit-processing of the Army standard KVMF message to communicate with internal and external systems. In this paper we proposed improved method of KVMF message processing for ADC2A system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.3
• /
• pp.1377-1399
• /
• 2020

In search and rescue mission, micro aerial vehicles (MAVs) are typically used to capture image and video from an aerial perspective and transfer the data to the ground station. Because of the power limitation, a cluster of MAVs are required for a large search area, hence an ad-hoc wireless network must be maintained to transfer data more conveniently and fast. However, the unstable link and the intermittent connectivity between the MAVs caused by MAVs' movement may challenge the packet forwarding. This paper proposes a delay tolerant packet forwarding algorithm based on location estimation for MAV networks, called DTN_est algorithm. In the algorithm, ferrying MAVs are used to transmit data between MAVs and the ground station, and the locations of both searching MAVs and ferrying MAVs are estimated to compute the distances between the MAVs and destination. The MAV that is closest to the destination is selected greedy to forward packet. If a MAV cannot find the next hop MAV using the greedy strategy, the packets will be stored and re-forwarded once again in the next time slot. The experiment results show that the proposed DTN_est algorithm outperforms the typical DTN_geo algorithm in terms of packet delivery ratio and average routing hops.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.252-257
• /
• 2000

This paper describes a look-ahead algorithm of PCNC(personal computer numerical control). The algorithm is based on acceleration/deceleration before interpolation never including a command error and determines a velocity value in end point of each block(or start point of each block). The algorithm is represented as following; 1) calculating two maximum arrival velocity(v1, v2) by a acceleration value, a command velocity and distance in a previous block and a next block, 2) getting a tangent velocity(v3) of the adjacent blocks, 3) choosing a minimum value among these three velocities, and 4) setting the value to a velocity of a start point of the next block(or a end point of the previous block). The proposed look-ahead algorithm was implemented and tested by using a commercial RTOS(real time operation system) on the MS-Windows NT 4.0 in a PC platform. For interfacing to a machine, a counter board, a DAC board and a DIO board were used. The result of the algorithm increased a machining precision and a machining speed in many short blocks.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.559-571
• /
• 2008

Platform Screen Door(PSD) has been installed and operated at seoul subway line $1\sim4$ in the manual train operation mode(ATS/ATC) by SeoulMetro since 2005. SeoulMetro uses the wireless (RF) communication system and the train door detection system for the link between the train and PSD doors opening/closing motion in the manual train operation mode. For the convenience and safety of passengers, the train doors and the PSD doors opening/closing shall be synchronized as much as possible. In ATO(Automatic Train Operation) mode which provides the interface between train control system and PSD system, ATO signaling system makes the train doors and PSD doors open/close command signals systematically, so PSD doors can be opened/closed almost simultaneously with the train doors. But, in the manual train control(ATS/ATC) mode, PSD system needs to detect the train doors open/close operation and make PSD open/close command signals to actuate PSD doors. These PSD open/close commanding process cause time delay of PSD doors opening/closing motion in response to the train doors opening/closing motion. Sometimes the response delay time can be over 1 second, which is not proper to operate PSD, and need to be reduced This paper presents the reduction method of the PSD response delay time to improve the convenience and safety of passengers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.101-102
• /
• 2018

Users who using computer may experience fatigue or sickness on their wrists if they use the keyboard and mouse for a long time. People with physical disabilities will find it difficult to work with the keyboard and mouse. There is a problem in that the substitute product for solving this is limited in function or expensive. In this paper, we development a system for controlling a personal computer with voice commands using the Amazon Echo and Amazon Web Services lambda functions. The implemented system processes the user's voice commands from the Amazon web server and sends them to the personal computer. The personal computer processes the received command and uses it to operate the application program.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.2
• /
• pp.69-76
• /
• 2002

To obtain a high performance in a vector controlled induction motor, it is essential to know the instantaneous position of the rotor flux which depends on the rotor time constant. But the rotor time constant mainly varies due to the temperature rise in the motor winding, so real time compensating algorithm is necessary. This paper proposes that it uses short duration pulses added to the constant flux command current and then resultant torque command current produced by speed controller is utilized for the rotor resistance estimation. This method has advantage with a low computational requirement and does not require voltage sensors. The proposed method is proved by simulations and experimentals.

• IE interfaces
• /
• v.12 no.2
• /
• pp.193-204
• /
• 1999

Development of high technology especially in telecommunication and precise weapon systems will impact the future battle field environment. So it is not difficult to anticipate the environment of military command and control system will be changed rapidly. Considering these future battle field environment, military needs automated C4I (Command, Control, Communication, Computer and Intelligence) system, namely real time decision support system which is combined high technologies. Most of advanced countries have been studied and developed these kinds of systems and already applied these systems in real military operations. In order to take a military initiative in Korea peninsula it is essential to catch up with this trend and procure C4I system. The purpose of this research is to present the method and the direction of optimal C4I system development model. First we survey the related theory about C4I systems. Second we present the conceptual framework for C4I system concept development. Third we model the system using Timed Petri-Net and perform simulation. Finally we analyze the through-put time and suggest alternatives. If we model using the real organization structure, operational tasks and various situations then optimal C4I system would be developed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.63-69
• /
• 2014

RFIDs have not become widespread as expected partly due to the cost, size, read range, and reliability problems of tags. The success rate of reading must be improved in order for RFIDs to be widely adopted. Quality control of tags is crucial to meet this requirement. In this study, we designed and implemented a high-performance reader used in inspection equipment that conducts prior inspection of tags. To improve performance of the developed reader, the baseband modem and command processor (CP) were designed using H/W logic and implemented with FPGA. The inspection of small pitch inlays was made possible through the antenna shielding device and H/W command processor function. This equipment enables accurate evaluation of performance and identification of tags satisfying a given read range. By contributing to sort out defective tags, the results can ultimately lead to more stable RFID services.