• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.125.5-125
• /
• 2001

Until now, many guidance laws have been developed. They mainly used the classical tail-pursuit guidance method based on geometric angle information, the proportional navigation method based on the line of sight(LOS) rate, and the optimal guidance law based on optimal control theorem. In the augmented guidance law, target acceleration information and autopilot characteristics are added the guidance command. In this study, new guidance laws considering geometric angle are proposed. Two guidance laws are developed for the midcourse guidance law, and a guidance law is developed for the terminal guidance respectively. The proposed guidance laws utilize the LOS rate and the geometric angle information simultaneously. In the midcourse guidance, the guidance command is ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.100.1-100
• /
• 2002

In this paper, we present autonomous mobile robot system, which has an image recognition module and perform tasks by itself with manipulator. Autonomous mobile robot can push each individual button on an elevator panel from a person's command. After the robot receives its command, it analyzes the image information of the elevator button that is acquired by CCD camera in an indoor environment with an elevator. In order to recognize the numbers on the button, the robot separates the number area in button and recognizes the segment through a neural network algorithm. We use the bar code form on the manipulator to find the position of the end of manipulator. The validity of the proposed method i...

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.293-294
• /
• 2011

본 논문에서는 비디오 카메라를 이용하여 촬영한 영상신호의 편집 시스템과 편집 방법, 그리고 효율적인 영상 관리를 수행하는 영상 시스템을 제안한다. 이를 위해 아날로그 비디오 카메라로 촬영한 아날로그 비디오 신호 또는 디지털 비디오 카메라로 촬영한 디지털 비디오 신호를 컴퓨터 시스템을 이용하여 볼 수 있는 비디오 스트림 데이터로 변환시킨다. 컴퓨터 시스템에 구비된 사용자 인터페이스를 이용하여 입력되는 사용자의 요구에 따라 변환된 비디오 스트림 데이터를 내용 또는 일자별로 인덱스화하여 저장하며 사용자가 인덱스 정보를 이용하여 비디오 스트림 데이터들을 검색하고 편집한다.

• Journal of the Ergonomics Society of Korea
• /
• v.10 no.1
• /
• pp.3-10
• /
• 1991

The teach pendant and keyboard have been used as an input device of control command in human-robot sustem. But, many problems occur in case that the usef is a novice. So, speech recognition system is required to communicate between a human and the robot. In this study, Korean voice commands, eitht robot commands, and ten digits based on the broad phonetic analysis are described. Applying broad phonetic analysis, phonemes of voice commands are divided into phoneme groups, such as plosive, fricative, affricative, nasal, and glide sound, having similar features. And then, the feature parameters and their ranges to detect phoneme groups are found by minimax method. Classification rules are consisted of combination of the feature parameters, such as zero corssing rate(ZCR), log engery(LE), up and down(UD), formant frequency, and their ranges. Voice commands were recognized by the classification rules. The recognition rate was over 90 percent in this experiment. Also, this experiment showed that the recognition rate about digits was better than that about robot commands.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.83-90
• /
• 2006

A robot manipulator is usually operated in two modes: free and constrained motion modes, depending on whether the robot is in contact with an environment or not. At the moment of contact, an impact occurs and can exert harmful effects to the robot or the object. In case of teleoperation, since a user may give an inadequately excessive velocity command to the slave due to insufficient visual information, the robot nay collide the object with an excessive speed and it possibly deteriorates the robot's performance causing vibrations and at worst, shortens its lifetime by its fracture. In this article, a new algorithm is proposed by introducing a command signal modification method on the basis of impedance control and validity of the proposed algorithm is demonstrated by performing simulations and experiments.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.929-933
• /
• 2004

A robot manipulator is usually operated in two modes: free motion and constraint motion according to the fact whether the robot comes into contact with the environment or not. At the moment of contact, impact occurs, and sometimes, it can possibly degrade the robot's performance such as vibration and at worst, shortens its lifetime. In this article, a new proposed algorithm is described by introducing a command signal modification method on the basis of impedance control and a validity of the proposed algorithm is demonstrated by showing the simulation study.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.1
• /
• pp.51-57
• /
• 2001

How to promote students interest is very important in undergraduate engineering education. One of the techniques for achieving this is select appropriate projects and to integrated them with regular courses. In this paper, a voice recognition system for autonomous robots is proposed as a project to educate students about microprocessors efficiently. The proposed system consists of a microprocessor and a voice recognition processor that can recognize a limited unmber of voice patterns. The commands of autono-mous robots are classified and are organized such that one voice recognition processor can distinguish robot commands under each directory. Thus. the proposed system can distinguish more voice commands than one voice recognition processor can. A voice com-mand systems for three autonomous robots is implemented with a microprocessor Inter 80CI196KC and a voice recognition processor HM2007. The advantages in integrating this system with regular courses are also described.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.7
• /
• pp.556-562
• /
• 2003

This paper presents new attitude error differential equations to define attitude errors as the rotation vector for inertial navigation systems. Attitude errors are defined with the rotation vector between the reference coordinate frame and the platform coordinate frame, and Platform dynamics to the reference coordinate frame due to platform torque command errors are defined. Using these concepts for attitude error definition and platform dynamics, we have derived attitude error differential equations expressed in original nonlinear form for GINS and SDINS and showed that these are equivalent to attitude error differential equations expressed in known linear form. The relation between attitude errors defined by the rotation vector and attitude errors defined by quaternion is clearly presented as well.

• Journal of Industrial Technology
• /
• v.11
• /
• pp.115-124
• /
• 1991

In this study, we design a position controller for two axis servo system. The position controller performs numerical control(NC)to DC or AC servo motor or step motor, and also has a digital input/output sequence capability. The control program composed of position and sequence command, which is called channel, is programmed easily and user-interactively. And it is interpreted and the straight line and arc position command is interpolated. We develop the Z80 microprocessor based system and the software with assembly and C language, and also PC based graphic simulator for the debugging and educational purposes.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.10
• /
• pp.381-386
• /
• 1984

This paper deals with the microcomputer realization of EMG pattern recognition system which provides identification of motion commands from the EMG signals for the on-line control of a prosthetic arm. A probabilistic model of pattern is formulated in the feature space of integral absolute value(IAV) to describe the relation between a motion command and the location of corresponding pattern. This model enables the derivation of sample density function of a command in the feature space of IAV. Classification is caried out through the multiclass sequential decision process, where the decision rule and the stopping rule of the process are designed by using the simple mathematical formulas defined as the likelihood probability and the decision measure, respectively. Some floating point algorithms such as addition, multiplication, division, square root and exponential function are developed for calculating the probability density functions and the decision measure. Only six primitive motions and one no motion are incorporated in this paper.